your say about the Carbtune | |
Date: Fri, 31 Jan 2020 17:03:10 +1100
Works perfectly with a fuel-injected 1988 BMW K100LT. The 4-column carbtune arrived at my place in Australia just ten days after I ordered it. Outstanding service. Assembled as per the instructions with no problems. I did need to drop-in at my local car shop and get a vacuum line T-piece to connect the rubber tube to the 4th throttle body (that has a vacuum line to the fuel pressure regulator which must be kept connected). Other than that, it all connected-up to all 4 throttle body test points with no problem. Gauge hung on the left-side hand-grip. Easy to read while adjusting the throttle body screws. On starting the motor, the carbtune showed that the throttle butterflies were well out of synch. I readjusted them as per the BMW manual to get them all reading within 2mm Hg on the carbtune, then set the idle to the correct speed (950RPM). The throttle bodies are now set-up properly. Big improvement. Better starting. Smoother idle. Smoother, better pick-up off idle. Smoother running at speed. All worked as advertised. And the carbtune cost less than the cost of paying a dealer to do that work.
Dxxxx Jxxxx, Victoria, Australia.
Date: Fri, 15 Nov 2019 18:46:22 -0600
Just wanted to say THANKS for such a GREAT PRODUCT !!!!!!. Joe USA
Date: Sun, 10 Nov 2019 16:52:44 +0000
Hi guys
Just thought I would drop you an email to confirm what your advertising has always indicated..........you can't beat quality.
Today I checked the carb balance on my trusty old ZZR1100..........which as you can see from the photograph, was pretty good!!
In the other photograph, you will see that your product has served me reliably for over thirty years. I bought the balancing tool for my Honda Superdream as a fresh faced eighteen year old.......little did I know that it was to be one of the best purchases I would ever make for the garage.
Many thanks,
Axxx Sxxxxxx Scotland
Date: Tue, 5 Nov 2019 18:50:09 -0500
I used the tool yesterday and today. It works flawlessly. ... Thank you for everything.
Jxxxx USA
Date: Sun, 26 May 2019 21:30:29 +0200
Hi Sean,
my congratulations for the Carbtune, I have used it today, it works very well and it is user friendly.
I want to say to you “thank” by your Carbtune now I am able to tune my Moto Morini, thank again a lot!
Rxxxxxx Italy
Date: Sat, 18 May 2019 22:25:07 +0100
Hi,...Wanted to say I’ve owned countless carb balancing kits in the past, even made my own manometer, nothing comes close to these for accuracy.
Cheers
Nxxxxx UK
Date: Wed, 1 May 2019 15:11:10 +0300
Hi again!
Finally i got my Carbtune home! And the first adjustment is done. Works great.
Best regards
-J- Finland
Date: Thu, 14 Mar 2019 11:21:00 +0000
Wow, thats an awesome Service, appreciate that!
Thanks a million and always ride safe. Ireland
Date: Thu, 28 Feb 2019 10:51:08 -0500
Hello,
I just ordered a Carbtune Pro and used it on my 2017 Yamaha FJ-09 or Tracer as it's called in the UK. This tool is brilliant and saved me a ton of money on service labor costs. I'm recommending this be purchased to all of my bike friends since I don't want to loan it out. Thank you and great job.
Rxx Bxxxxxxx USA
Date: Sun, 24 Feb 2019 14:55:36 +0100
Thank you too!
You're really kind!
Thank you for your product!
And for your support!
I'm really happy!
Best regards,
Axxxxxxxxx Italy
Date: Sun, 30 Sep 2018 16:06:41 +0000 (UTC)
The stainless tube system is so much easier to use than the Gen 1 mercury tubes you first sold...45 mins and the engine was done. Perfectly level from Rickover and through the range!! Quote me!! Have a great Sunday!! Pxxx UK
Date: Sun, 02 Sep 2018 23:28:51 +0200
Hello Sean,
The package came to me on August 28, so six days after sending and I am very pleased. The equipment looks professional .... I noticed your great professionalism and substantial, full description of the assortment on the store's website. This is a rarity, because usually sellers provide rudimentary information and I have to waste time asking a lot of additional questions, here everything is perfectly explained. I have not yet encountered such a clear description.
Shopping with the Lord is pure pleasure.
Regards,
Bxxxxxxxxx Pxxxxxx Poland
Date: Sat, 18 Aug 2018 22:24:14 +0200
Hello Morgan!
My carbtune pro arrived yesterday in good order. I already used it successfully with the bike of my wife - perfect!
Regards, Axxx Germany
Date: Sat, 18 May 2019 22:25:07 +0100
Hi, Wanted to say I’ve owned countless carb balancing kits in the past, even made my own manometer, nothing comes close to these for accuracy.
Cheers
Nxxxxx UK
Date: Fri, 27 Jul 2018 13:32:39 +0200 (CEST)
Hi Morgan,
I received the package yesterday.
Tuned my outboardmotor today, with good result!
Regards
Txxxx Italy
Date: Wed, 11 Jul 2018 19:14:09 +1200 (NZST)
Hello,
the Carbtune Pro 4 arrived Monday 9th July. Impressed with the quality of the tool, pouch and the instruction manual. Now need to find some time to do a full service on my Yamaha XSR900.
Really appreciated that you supply direct to the public. Often for specialist tools there are limited options in New Zealand.
Thank you.
Kind regards
Mxxx Pxxxxxx NEw Zealand
Date: Fri, 22 Jun 2018 12:18:04 +0000
Thanks!
Did my 40HP Honda outboard motor (3 cyl) last night.
All I can say is WOW, what a difference. Great product!
Regards.
On 27/05/2018 15:45, David Hall wrote:
Hi Sean.
Received the carb tune the next day. Carb balancing/syncing must be one of the most satisfying jobs on a motorbike. My Kawasaki was idling and running very unhappy. Turns out the carb were miles out of sync.. It now idles and runs smooth as silk.
Thanks Dxxxx Rxxx Hxxx
Date: Tue, 24 Apr 2018 23:43:40 +0200
Hello Morgan !
I got today the carbtune pro with its accessories.
I tested it on my motorcycle and it is an excellent tool that allows for easy and precise adjustment. I'm really happy.
Best regards.
Jxxxxx
Date: Fri, 20 Apr 2018 20:07:36 +0200
Hello Sean,
I received the Carbtune and I will try it tomorrow !
I was pleasantly surprised by the care given to the details for your
product, .... as well as the very detailed manual and its explanations.
Regards,
Lxxx
Date: Wed, 21 Feb 2018 01:49:20 +0000 (UTC)
Good day,.... Thank you. I am very satisfied with the tool, your quick shipping, courtesy, promptness, and quality. Highly recommended.
Thank you,
Ex Wxxxxx
Date: Mon, 18 Dec 2017 17:23:48 -0500From: HOLY CRAP! THIS THING IS AWESOME! By far the easiest sync tool Ive ever used. I have a 99 ZRX1100 and it runs so smoooooth now! I am very impressed!-Dxx
Date: Wed, 15 Nov 2017 06:40:37 -0600From: hand down the best investment I have ever made thank you so much opportunity to tune my bike myself so easy to use very pleased with my purchase
Date: Thu, 9 Nov 2017 21:14:30 +0100From: rxxxxxxx@web.de>Hello Sean,I bought my Carbtune Pro in -I guess it was- 2013 and since then never looked back atmy dials again.The carbtune is so much more accurate and a lot easier to readthat I wondered how on earth I ever got along adjusting carbs without it.It's that big of a difference and it can easily be heard that the engines arerunning much smoother and at lower idle rpm once properly adjusted. ..... ..... Oh, and instead of lending my carbtune to my mates (one is a professional with his own garage) all the time,I just ordered a Carbtune Pro for that one to be used in his shop...Kind Regards from Detmold, GermanyRxxxx
Date: Mon, 11 Sep 2017 09:54:49 +1000From: pxxxxxxx@gmail.com>I used the Pro carbtune to balance the idle on the NSU TTS Prinz after removing drilling and tapping the manifold for the vacuum fittings . The engine is a 1000cc with twin Phh40 Solex carbies.The carby balancing took approximately 10 min. to get a perfect result.Amazing! !Thanks for an excellent product.Regards Pxxx
Date: Thu, 17 Aug 2017 18:47:27 -0500From: pxxxxxxxxx@gmail.com>Good morning Sean..(well possibly YOUR morning when you read this.)Quick update on the Carbtuner. Spent some time with the Tuner and my Royal Star. Very easy to work with, and work on. All told it took me about 45 minutes to complete the synch... most of that time spent finding the carb screws I needed to tweak, then trying to keep the screwdriver ON that screw with the engine running and looking at the Tuner.Great experience, overall. Didn't have to remove the tank and all four vacuum ports were basically right out in the open, and no need for the adapters. Took less than 10 minutes to hook it up.Great product, Sean. Easy to use and delivers as advertised.Cheers..Papa Fxxx.
Date: Mon, 24 Jul 2017 20:34:10 +0200From: Hello,I have offered the Carbtune to my father last week-end.He was pleased to re-adjust his Yamaha 1000 GTS, and 1000 Virago... after having broken the 30 years old bottle of Mercure.My BMW R1200GS, and the Honda 500CB of my son was also in the party !Many thanks Sean from the Alpes.
Subject: Quality of serviceDate: Fri, 14 Jul 2017 01:20:10 +0000From: Hello Sean,I received my Carbtune today much earlier than I expected. It was really fast. I am excited to try this tool next week. Again, thank you for the quality of the service you gave me. Worth it to deal with such company like you.Sincerely,Cxxxxxx BxxxxRawdon, Quebec, Canada
Date: Tue, 6 Jun 2017 19:49:49 +0000 (UTC)From: Hello Morgan,Got the unit, read the directions, set up the tool and it was a piece of cake! Very nice product, especially that there is no fluid involved.Thank you and have a good day!Bxxxx
Date: Wed, 31 May 2017 00:14:47 +0000From: Jxxx Hi,I received my Carbtune today, 30 May 2017. Yesterday was a US holiday, too, so it would probably have arrived a day sooner. Thanks for the quick processing and delivery.It worked well, too. Simple, easy to read, and sensitive. I'm very happy with it.Jxxx
Date: Sun, 28 May 2017 11:51:00 +0000 (UTC)From: Hello,I received the order and I want to let you know that everything is the way I expected, even better.I was impressed by the speed with which you delivered. Thank you. I can not wait to test Carbtune Pro, I think it's a great product!Vxxxxxxx
Date: Wed, 10 May 2017 20:26:10 -0600From: Got it!! The one we needed to sing for anyway. My GS has never run this clean. The tool is awesome!!! As a mechanic and instrumentation tech I understand that above accuracy, repeatability is key to the value of any such tool. I switched columns between cylinders and repeated adjustments and the Carbtune delivered the consistent performance that makes tuning a science as opposed to a black art. Although the delivery was a bit of a pain (Canada Posts issue not yours) now that I have it I€™m truly glad I ordered one.Thanks again for all your support making sure I received it. I am a truly happy customer.
Date: Wed, 3 May 2017 20:33:54 +0000 (UTC)From: Dxxxxx Wxxx Thank you for my order and helpful advice.and for your super service would definitely would recommend you to my friends
Date: Wed, 03 May 2017 09:51:44 +1000From: Cxxxx Hi Sean,"Thank you for all your customer support in following up with the Royal Mail delayed late shipment, very much appreciated.The Carbtune is certainly an excellent, well thought out product. In a very short time and with little effort I was able to balance the Dellorto carbs on my 1976 Laverda 1000 3CL with accuracy and immediately note the improvement. Very simple to initially set up the Carbtune and install the adaptors-thorough instructions. I will now use it on my fuel injected motorcycles. The Carbtune is an essential tool in my kit now."Cheers, Cxxxx
Date:Sun, 23 Apr 2017 18:58:43 +0100
From: gxxxxx.sxxxx@gmail.com
Sean,Just a quick note to let you know I used my carbtune to balance my R1100S throttle bodies today. After researching the specific adjustments for my engine, I have to say that it was really easy to use the carbtune which gave accurate and stable readings out of the box. Although the idle balance was fine, the part throttle balance was "out" and needed adjustment. Once sorted, a test ride showed the engine was much smoother with a crisper power delivery.I'm really pleased that I bought the carbtune, as I can now keep the motor running as it should. Just wish I'd ordered up the optional bag to keep it in! ...RegardsSxxxx
Date: Sat, 22 Apr 2017 08:34:28 +0000
From: txxxxxxxxxx@hotmail.com
Good morning Mr Morgan . Carbtune equipment delivered day after ordering , Thats brilliant service . thank you very much . .. Regards GX
Date: 11 April 2017 14:37
From: pxxxxxx@hotmail.com
Hi,Thank for the delivery, I received the carbtune today, in good shape, and I was able to find and fix the remaining unbalanced cylinder very quickly on my motorcycle. Regards,Cxxxxx
Date: 28 March 2017 19:16
From: vxxxxx.lxxxxxxxxxx@gmail.com
Hello! My Carbtune arrived today 28.4.2017 and succesfully got my motorcycle carbs tuned.Thank you for a great product. Best regards Vxxxxx.
Date: 21 March 2017 19:03
From: mxxxxxxx@hotmail.co.uk
Hello Sean,Just to let you know the Adapters and Pouch arrived today, so thanks for the Super Service. The Pouch is a nice bit of kit and if it had been available when I bought my Carbtune I wouldn't have "lost" my original adapters.I remain a very satisfied Customer,Cheers Pxxx
Date: 25 October 2016 18:46
From: pxxxxxxxx_1961@outlook.com
Ordered my carb tune Sunday order no 1000347 arrived today excellent service thank you Pxxx Sxxxx
Date: 26 August 2016 18:33
From: sxxxxx_xx@hotmail.com
Got it about couple weeks ago, works like a charm. Thanks
Date: Fri, 12 Feb 2016 19:13:53 +0100
From: exxx.lxxxxx@free.fr
Bonjour à toute l€™équipe de Morgan,
Je tiens tout particulièrement à vous remercier pour l€™envoi si rapide du carbtune.
J€™ai réceptionné le colis ce jour, la livraison a été très rapide et je suis très satisfait du produit qui correspond exactement à ma commande.
Je vous adresse toutes mes amitiés motardes,
A bientôt,
Très cordialement.
‰xxx Lxxxxx
Date: Mon, 1 Feb 2016 20:06:02 +0000 (UTC)
From: Gxxx Mxxxx
Just received the 90 degree Angle Driver.(Bevel Screwdriver) Looks great! Just like my carbtune synchronizer I purchased a few years ago, your products really are thought out and built the way a mechanic needs them to be.
Thank you.
Gxxx Mxxxx
From: Mxx Ix
Sent: 25 January 2016 11:12
Hello, Morgan!
I want to thank you especially for reliability, promptness and professionalism you have demonstrated in product delivery Carbtune Pro-4.
Today I came into possession of and am very pleased, can not wait to use it.
Congratulations and keep up the work in the future!
With gratitude,
Vxxxxx Vxxxx
Calarasi - Romania
From: Jxxxx Bxxxxxxx
Sent: 24 January 2016 16:23
Hi,
I gave the Carbtune a try today.
I have a Suzuki GSX 750 ES 1983 and I have had my carbs off for a properly clean.
I had synced them manually with a feeler gauge before reinstalling them on the bike, so I didn€™t think they would be much off.
I was so surprised when I hooked the Carbtune up and saw that the carbs was anything but synced!
About an hour later the carbs were properly synced and the throttle response was much better and a very smooth and steady idle.
Well worth the money!
Jxxxx Bxxxxxxx
From: Txxxx Sxxxxxxx
Sent: 17 January 2016 14:47
Hi,
I just received the tool this weekend, and the quality is even better than I imagined.
Thank you! :)
Sincerely,
Txxxx Dxxx Sxxxxxxx
From: Rxxxxx Cxxx
Sent: 20 October 2015 11:03
Thank you Sean
It has been my pleasure working with your Carb tune tool
The Carb Tune is a valued addition to my tool box and I expect to use it many times
I recommend it to all my friends that work with Multiple Carburetors
Rxxxxx Cxxx
From: Mxxxxxx and Axxx Bxxxxxx
Sent: 11 October 2015 09:35
Hi
Just to let you know the carbtune arrived in a couple of days.
I have used it and it is great - so much better than dial gauges I have used in the past!
Regards
Mxxxxxx
From: Gxxxx Fxx
Sent: 09 October 2015 18:51
Wow that was quick and at 10.01 PM ! I am impressed.
Thanks and now you know what I will be doing Saturday.
Very Impressed of Somerset.
Reds
Geoff Fox
From: Sxxxxxx Cxxxxxx
Sent: 05 October 2015 21:56
Hello Sean, the carbtune is working very well and it helped me to diagnose and correct the uncorrect align of a throttle valve on my FZ6 Fazer and now my engine runs at his best !
I am very keen to try it on my old Moto Guzzi when I finish the restoration work I am doing.
Sxxxxxx Cxxxxxx.
From: Jxxx
Sent: 21 September 2015 16:38
Good afternoon Mr Morgan,
Order number: 6xxxx / 080915 / 82
I have used the Carbtune Pro and found it very straightforward. The damping is just right for my FZS 600 Fazer and I was able to balance the carbs to within 1 cm Hg. The bike goes much more smoothly now (the worst cylinder was out by 5 cm Hg, but I had been fiddling about with my old 'one gauge and 4 taps' set-up) and the task of carb balancing is now not such a daunting prospect.
The main difficulty now is seeing the adjustment screws!
Thanks for great delivery and a great product.
Kind regards, Jxxx (Leeds, W. Yorkshire)
From: Fxxxxx Bxxxxx
Sent: 28 August 2015 07:39
Hello my name is Fxxxxxx Bxxxxx , I received my carbtune and my 90 degree carb tool on 8/17/2015 . I am extremely happy with both products , very high quality , thank you very much !
From: Dxxxxx Mxxxxxx
Sent: 28 August 2015 03:55
Just wanted to say thanks for the excellent service, extremely fast delivery and great product. I received the package from you faster than items ordered from just south of the border. Here is a video of the carbtune in action. 2007 Vstar 1100 Silverado...... Carbs now synched!
Dxx
From: Sxxxx X.
Sent: 26 August 2015 12:04
I have received my Carb tune as of 8/25 and it works great ! I used it last night when I got it and it works just as advertised and just as it's supposed to , thank you so much !
Date: Tue, 28 Jul 2015 09:07:23 +0100
From: dxxxxx mxxxx
Hello . Declan here ! I took delivery of item yesterday and have to say I'm very pleased with the high quality and precision of the instrument and excellent value in my opinion , Thank you so much ! Best regards ... ...Dxxxxx
Date: Fri, 17 Jul 2015 21:29:00 +0200
From: Sxxxx Bxxxxxxx
Hi
Just wanted to let yo know I purchased a carbtune a while back, finally
balanced my carbs tonight. Wow what a difference. What a great piece of
kit, easy to use, great price. Never thought it would be this easy.
If you want to use this as a testimonial please feel free.
Thanks
Sxxxx
25/06/2015 14:12, vxxxxxxxxx_axxxxx wrote:
Hi Sean ,I received my carbtune in about 9 days .It arrived yesterday at my place in Romania and I am a very happy costumer cause this is a wonderful tool and a must for every motorcycle owner. Thank you
Mon, 15 Jun 2015 08:57:54 +0000
From: Lxxx Hxxxxxx
Hello Sean,
My order (5xxxx/010615/42) arrived on Friday, 12.06.15. Carbtune was in perfect condition, and worked perfectly. I'm very happy with quality and how easy it was to tune the carbs on my '95 Triumph using the Carbtune.
Vennlig hilsen / Kind Regards
Lxxx B Hxxxxxx
From: Cxxxx Wxxxx
Sent: 07 June 2015 00:46
Hey!
Received my carbtune today. 10 mins after connecting it I'm done and the bike runs amazing!
Thanks!
Mon, 27 Apr 2015 20:05:18 +1000
From: Pxxx <pxxxxxxxx@yahoo.com.au>
Hello Sean,
The tool arrived....wow... Should have brought this years ago.
Gained extra torque, better economy and so smooth.
Best part it took less than half the time of using my other gauges, they are residing in the garbage.
Thanks,
Pxxx.
Mon, 20 Apr 2015 15:46:48 -0700
From: Axxxx <axxxxxxxxxxxx@gmail.com>
package arrived Thursday April 16
thanks so much the carbtune pro works very well and did a remarkable job.
Axxxx
14/04/2015 00:12, Mxxxxxx John Wxxxxxxx wrote:
Hello Sean
Package arrived today. Very nicely made product, used it on my SV1000S. Excellent.
Thank you and all the very best.
Mxxxxxx
From: cxxxxxxxx@exxxxx.net
Sent: 03 April 2015 08:25
Have to say fantastic service. Super quick delivery and I got the lot delivered for less that one retailer wanted for the postage alone !!!! I've posted on any biker forum I'm involved in recommending to direct directly with yourselves.
Thanks again
Txx
From: Dxxx Hxxxxxx
Sent: 24 March 2015 23:41
Arrived today & used today, superb. Thanks
From: Axxxxx.mxxxxxxxx
Sent: 13 February 2015 01:49
Hi, feeling tremendously accomplished after balancing my carbs with the Carbtune Pro, very straightforward and quick operation. The pouch is much better quality than I'd expected. Thanks for excellent value for money and great service. I ordered online on the 23rd of January and received it on the 3rd of February here in Las Vegas.
Appreciatively Axxxxx.
From: Pxxx Bxxxxx
Sent: 07 February 2015 17:46
Hi Sean
Spot on thanks for your help. I love your vacuum gauges and now your service is fantastic too. It's time for a you tube video showing your product and it applications as I have used it on outboard motors and rotax micro light motors.
Thanks Pxxx.
From: Mxxxxx Exxxx
Sent: 13 January 2015 14:36
Just received your product in the mail, opened the package, hooked it up to my 4 carbs, realized how out of synch they really were, and had them straightened out within ten minutes.
The bike runs better than it ever has.
Thanks for a wonderful and easy to use product.
Mxxxxx Exxxx
British Columbia, Canada
From: sxxxx
Sent: 13 January 2015 09:54
Hi Sean,
Received my Carbtune today very pleased with delivery time and product all works fantastic.
Thanking You
Sxxxx Sxxxxx
From: Exxx Pxxxxx
Sent: 29 December 2014 22:56
Hi Sean,
very impressed, about half an hour to read the instructions and set-up the hoses and about 10 minutes to balance the inlets on my FZ6. Able to get very fine adjustments and engine running very smooth. .....
Exxx.
From: Axx
Sent: 17 December 2014 20:47
I received my package today. I am glad I got the carrying pouch, it is absolutely beautiful! I plan to use the carbtune this week since we have 70 and 80 degree weather here.........Axx
From: mxx
Sent: 04 December 2014 18:55
Hi Sean,
Just wanted to let you know - I received my Carbtune the other day. What a great tool, simple and easy to use! Glad I got it with the case. Bike is so smooth now. Will get some other bits and pieces in the future.
Thanks
Mxx
From: Dxxxx Dxxx
Sent: 11 November 2014 18:11
Hello Mr. Morgan.
I'm very happy with this tool. I just used it and took me 5 minutes to synchronize my 4 carburetors! I have very bad experiences with the MotionPro one....
Thank you very much!
Dxxxx
From: cxxxxxx hxxxxxx
Sent: 11 October 2014 12:02
Hello,
My order was placed yesterday morning, I have just taken delivery. Fast by any standard, thankyou for such speedy service.
From: Sxxxxxx Hxxxx
Sent: 10 October 2014 16:13
Hi
My carb tune arrived safely today.
I'm very impressed with both the product and your speedy service.
Regards
Sxxxx
From: Cxxxxxxxx Rxxxxxxxx
Sent: 08 October 2014 11:01
Hello!
Tried the carbtune for the first time today, Worked like a charm! No need to use adapters, just used the wiretype hoseclamps from the blockoff rubbers from bike..
Thanks for a great product!
Wed, 10 Sep 2014 13:31:10 +0100
From: Nxxxx SxxxxHi There,
Just like to say my Carbtune arrived (very fast delivery) and works like a dream. Very happy.
I have a Honda Deauville NT650v (twin Vee cylinder) and your instrument fits easily and reads clearly.
Tried indicator vacuum dials in the past and they just bounce all over the place.
Many thanks,
Nxxxx Sxxxx
From: Gxxxxx Wxxxxxxx
Sent: 30 August 2014 22:02
Hi Sean.
Thankyou for the prompt postage of my Morgan Carbtune. It turned up while I was away for work, on the 18th of August. I used it yesterday and am really happy with the product, my bike is running a lot better.
Many thanks,
Gxxxxx.
From: bxxxx.sxxxxx@tiscali.co.uk
Sent: 27 August 2014 18:29
sean received order on 27/08/2014 brilliant product excellent service many thanks .pxxx
From: Hxxxxx Exxxx
Sent: 20 August 2014 19:13
Hi again, recieved my Carbtune yesterday.
Must say that it works like a charm. Used it on my Yamaha f50 outboard and now it runs really smooth. Much better than any other tool that I have been using.
Thanks alot.
Regards
Hxxxxx / Sweden
From: sxxx
Sent: 16 August 2014 21:36
Hello Morgan, I received my carbtune pouch on 15-08 14. nice bit of kit,just balanced throttle bodies on my 99 VFR800. piece of cake,Your carbtune is a great tool.kind regards stan.
From: Hxxxx R
Sent: 08 August 2014 08:58
Hi,
Thank you for this Carbtune manometer. I got it by mail on wednesday and yesterday I tested it with my Yamaha F50A 2000 outboard motor. There was some idling problems with Yamaha because the carbs were not calibrated properly and now it's working again thanks to Carbtune. So now I'm able to go fishing again :-) The maximum rpm of the motor also rised from 5300 to 5500 rpm. Thank you very much!
Br,
Hxxxx Rxxxxxx
From: lxxxxxxxxx
Sent: 05 August 2014 16:31
Hi just wanted to let you know I received my tools today. Thanks very much. I especially appreciate the 90 degree driver........I'm a sucker for quality tools you use seldom....lol. I bet I will have to use it on a cfm engine at some point (boeing), but today I shall get my RVF tuned up.
Cheers.
Lxx
From: Pxxxx Pxxxx
Sent: 05 August 2014 10:58
Hi Sean,
just wanted to let you know that I finally got around to doing the work. The Carbtune works perfectly, I was done in just a few minutes. Before, I did the syncing with a self built gauge (oil, bottles and lots of tubing) which was always a real hassle to do. Congrats for a great product!
Cheers,
Peter
From: Sxxxx Mxxxxxxx
Sent: 25 July 2014 00:18
Mr. Morgan, received my Carbtune Pro today July 24, 2014. Ordered it on July 16. Excellent delivery time. This is a fine instrument and the case is top quality too. Plan to put it to use this weekend.
Thanks, Wxxxxx
From: Cxxxx Dxxxxxx
Sent: 27 September 2013 09:43
Hello,
I just used the Carbtune pro last night to Sync the carbs on my Moto Guzzi Monza.
FANTASTIC! Super simple and works a treat. All done in 20 mins and the bike now runs and sounds smoother.
Well done on a great product!
regards
Cxxxx Dxxxxxx
From: mxxxxxxxxxxxx
Sent: 16 August 2013 12:40
Hi Sean,
Carbtune arrived wendnesday, took me less then 5 minute's to sync the carbs.
Perfect piece of kit !!!!!
Cheers, Mxxxx
From: Jxxx Mxxxxx
Sent: 01 July 2013 22:44
Hello,
Just a quick note to thank you for a superb product.
Having just received my new Carbtune Pro, I used it today to synch the TBs on
my brother-in-laws R1100GS. Such a joy, far superior to the mercury and fluid crap
I've used in the past.
Hurst TX, USA
From: Jxxx L. Bxxxx
Sent: 13 June 2013 22:58
... I am letting you know that I received notice of my Carbtune being delivered yesterday, June 12, 2013. I will add that I just finished syncing the carbs on my 2006 Royal Star Tour Deluxe and it couldn't have been easier. Great product, great price, and so very simple to use. Couldn't ask for more, thank you.
Jxxx
From: Pxxxx Mxxxx
Sent: 26 May 2013 20:08
Hi Sean,
Just to let you know that the Carbtune arrived the next day, so many thanks for your prompt service. Also, it worked great on my old XJ900f so I'm delighted, thank you!
best wishes
Pxxxx
From: mailto:h.vxxxxxxxxx@chello.nl]
Sent: 30 April 2013 19:45
Hello Sean,
As promised hereby the feedback of the first use of carbtune.
Today I used it to adjust my old Suzuki VX800 and it worked perfectly .... The VX runs very smoothly now and picks up far better then before.
Perfect tool and easy to use! I will spread the word...
Best regards and thanks again for your support.
Huub
From: cxxxx sxxxx
Sent: 30 April 2013 02:14
Received it the next day on the 25. It works great. already fixed the wives bike and she is puuuuring like a kitten. Working on mine now. Thanks much
Cxxxx
From: Sxxxx Lxxxx
Sent: 25 March 2013 01:19
Thanks Sean
Got my old 1983 GPz750 sorted out over the weekend, thanks to the Carbtune. It is so simple to set up and use, and the clear instructions would ensure even a novice hobby mechanic couldn't mess up.I'm really chuffed to bits with it; it will certainly be getting plenty of use as my carbs are advised to be checked very regularly.I'll certainly be recommending it to any other bikers I meet here Down Under!
Many thanks Sent: 25 March 2013 01:19Thanks SeanGot my old 1983 GPz750 sorted out over the weekend, thanks to the Carbtune. It is so simple to set up and use, and the clear instructions would ensure even a novice hobby mechanic couldn't mess up.I'm really chuffed to bits with it; it will certainly be getting plenty of use as my carbs are advised to be checked very regularly.I'll certainly be recommending it to any other bikers I meet here Down Under!Many thanksSxxxx
From: Jxxx Txxxxx
Sent: 15 January 2013 05:35
Hi Sean,
I received the Carbtune this evening and it works great! It's such a great product. It was very easy to use and accurate. Throttle response is instant now.
Thanks again.
Jxxx
From: Sxxxx Kxxxxx
Sent: 03 January 2013 18:16
Many thanks received 90% screwdriver today just wanted to say thanks for quick delivery and what a excellent bit of quality kit
From: Oxxxx Cxxxxxxxx
Sent: 21 December 2012 11:10
Hello amigos,
I€™m just letting you know that I received my colortune 3-plug kit and 4-colume Carbtune synchronizer on Dec 10, I was very surprised that it only took 7 day to get to North Hollywood, California.
Awesome product and thanks for the A+++ service!
Happy Holidays,
-Oxxxx
From: Jxxx [mailto:jxxxxxxxxx@live.com.au]
Sent: 14 December 2012 11:29
G'day,
I would just like to thank you all for the great product you sent to me, here in Adelaide South Australia.
I ordered the four stick unit on the 26/11/2012 online and received it here on the 5/12/2012.
Had it assembled and fitted to my recently restored (it took me four years) 1976 Yamaha XS750D, and within 30 minutes, she was idling like a dream.
Fingers crossed, our South Australian weather will improve, as we are supposed to be in summer, and I can get her on the road and run in!
Once again, thank you all for sending the four stick carbtune to me so promptly, I look forward to many years of tuning with it.
Have a very Merry Christmas and a Happy and rewarding New Year. Don't get too cold, aye.
Regards,
John D.
From: Jxx Pxxxx
Sent: 15 November 2012 03:03
Received the Carbtune today (11-14-12) in good condition. All ready used it on my bike (Honda ST1300). Worked as advertised and will be using it on two friends bikes. Thanks for a great product.
Jxx Pxxxx
From: Gxxxxxxx Sxxxxxxx
Sent: 01 November 2012 22:23
Hi Sean, I've received the Carbtune yesterday, and today I've synced my FZS 600.
Thank you very much indeed for your wonderful product, everything was easy and comfortable with it, the whole task took maybe 40 minutes, from removing the tank to put it back in place! I will suggest all my friends to get a Carbtune for their own, for sure. Have my best wishes, Yours sincerely, Gxxxxxxx.
From: bxxxxxxx@cxxxx.net.nz
Sent: 10 October 2012 19:58
to all at carbtune
on the 1st of oct i ordered a carbtune pro.
i would like to say thank you for your excellent service as it was delivered to me at my address in new zealand on the 9th of oct.
you have a very happy customer and would recommend you and your products once again thank you.
gxxxxx pxxxx
tauranga
new zealand
From: "Mxxx Wxxxxx"
Sent: Sunday, September 02, 2012 3:43 PM
Sean,
The holiday weekend here gave me a chance to perform a TBS on my FJR1300A.
Let me say that your Carbtune is a great piece of kit! It worked exactly as the instructions said it would. Just wanted to let you know that it is very pleasing to have equipment that makes this tedious job so straightforward, and the results so accurate. TBs are all synched now and the bike purring like a cat.
Thanks again. Great product.
Mxxx
From: Jxxxxxxxx Mxxxxxx
Sent: Wednesday, August 15, 2012 8:52 PM
Hi Sean.
Just a few words to tell you how happy I am with the Carbtune. The enclosed documentation is fantastic and even though I hadn't tuned throttles before it made the job really straightforward. Start to finish it took me about 15 minutes.
Kind regards,
Jxxxxxxx TT600
From: "Cxxxxxxxx Lxxxxxx"
Sent: Sunday, August 12, 2012 10:33 PM
I tuned the carbs today, on the water. Took me about 15 minutes total from popping of the cowl until putting it back on. I had the carbs pretty good set up by ear but this last touch made that I could lower the idle from 1000 rpm to specified 800 rpm without the engine stalling. The motor also runs more evenly in trolling speeds. I strongly recomend this tool for Mercury/Mariner carbed 4-stroke outboards. Well spent money since the marine mechanic had a fixed price for this which was more expensive than the tool.
Cxxxxxxxx
From: Gxxx Mxxxx
Sent: Monday, July 30, 2012 3:49 PM
Hey Morgan --
Received my Carbtune on Friday, 27 July. Used the tool Saturday. Worked great. It was my first experience in synching carbs, so I don't know how well other tools work but yours works great. Have heard it said that an experienced person can Carbtune synch their carbs on the fuel in the float bowls and don't have to hook up an auxillary fuel tank. I believe it. Carbtune works that well and it only took about ten days to get here.
Great product and great service. Many, many thanks.
Gxxx Mxxxx
Kansas City, Missouri
From: Mxxx Rxxxxx
Sent: Saturday, June 30, 2012 3:06 AM
Dear Carbtune Staff, I own a 1999 Honda ST1100 non abs which I have just updated with new suspension, timing belt, check valves, and a view other maintenance issues. I had made a home built Carb syncronizer from several internet examples, but continually was sucking the oil out of the contraption during the run up even with several different restrictors. I waited patiently for eight days for your product to come, installed the resistrictors, and in less then 45 minutes had all the carbs dialed in nicely at both 1200rpm and 1800rpm. Beautiful tool ! It worked flawlessly. Thanks for your inventiveness to free us of the old and hazardous mercury sticks. Sincerely Mxxx W. Rxxxxx Dayton, MN USA
From: D. Dxxxxxx
Sent: Wednesday, June 06, 2012 5:47 AM
Hi,
I received my carbtune a few weeks ago and had my carbs sync'd in 20 mins. What a difference! Thanks so much for an easy to use and fantastic product!
Dxxxx Dxxxxxx
From: Lxxxxx Sxxxx
Sent: Friday, June 01, 2012 5:47 AM
Hi Mr. Morgan,
I had received the carbtunes and also have using it.
Now my GSF 400 has been running super smooth in every rpm range.
Also my mechanic friend has been using it extensively in his workshop.
He said it is super easy to use for calibrating 4 carbs simultaneously.
Wonderful product you have created.
Thank you.
Regards
Lxxxxx
From: gxxxxxxxxx.xxxxxxxx@libero.it
Sent: Saturday, April 21, 2012 12:40 AM
Subject: Carbtune, very very good
Hi,
I fixed today carburettor of my Guzzi LeMans.
Absolutely perfect, quickly and reliable.
I can compare Carbtune with my previosly mercury gauge (professional) and it's much more accurate, light.
Thanks, really a good product, I'll recommend it to my friends.
Best regards from Italy
Gxxxxxxxxx Zxxxx
From: Hxxx Mxxxxx
Sent: Wednesday, April 04, 2012 10:18 AM
Good morning,
The postman delivered my carbtune yesterday and I just finished synchronising 5 minutes ago. Piece of cake, what a fantastic tool, much better than the round ones!
All the best,
Hxxx Mxxxxx
From: PXXXXXXXX, Gxxx
Sent: Monday, March 26, 2012 11:03 AM
Good Morning
I ordered a Carbtune Pro from you on Friday 23rd am and it arrived Saturday 24th around 9am. By about midday on the Saturday I had my carbs balanced perfectly. I would just like to say thank you for such quick service and what a brilliant piece of kit the Carbtune Pro is!!
Regards
Gxxx Pxxxxxxxx UK
From: "Sxxxxxx Bxxx"
Sent: Wednesday, March 21, 2012 12:18 AM
Received my carbtune pro today. Fairly quick shipping considering it
came from the UK. The tool itself is fantastic. I used it as soon as it
arrived, and my carbs are now perfectly sync'd. Thanks for the quick
service and a quality tool, I'll be recommending you to my friends.
From: Pxxxx X. Kxxxxxx
Sent: Thursday, February 09, 2012 2:02 AM
I got my item today and it worked out perfect. 100% perfect.
Very nice tool.
Thank you!!!!
From: Axxxxxxxx Kxxxxxxx
Sent: Friday, January 20, 2012 7:42 PM
Your carbtune makes everyone look like bike mechanics,even the stupidest ones!I just synchronised my SV's carbs:piece of cake with that tool.
Well done,
Axxxxxxxx
From: "Bxxx Hxxxxxxxx"
Sent: Sunday, January 08, 2012 7:29 PM
Hi Sean - I gave the Carbtune a go last night on my Triumph Daytona
1200 and have to say that this product is everything you promised.
There is simply no comparison to the mercury type guages I was using
for these past many years. The "rods" in the carbtune are easy to see
and unlike the mercury gauges do not get air bubbles in the tubes. I
am going to give the Carbtune a go on my fuel injected Ducati next to
synchronize the throttle bodies; instead of a dreaded maintenance
chore as in the past, I am actually looking forward to using it again.
As an owner of 7 motorcycles I must do my own maintenance out of
necessity and now I wish I had sprung for the Carbtune years ago.
Installing the dampers takes under 5 minutes and the storage pouch is
a classy addition. The Carbtune unit is a quality item all the way.
Regards,
Bxxx H.
Portland, Oregon
From: Dxxxx Cxxxxxx
Sent: Wednesday, December 14, 2011 7:27 PM
Bonjour Mr. Morgan,
J'ai reçu mon carbtune pro aujourd'hui,excellent produit et très facile d'utilisation.Encore merci
Cordialement,Cxxxxxx Dxxxx.
From: Jxxx Txxx
Sent: Tuesday, November 01, 2011 9:02 AM
Hello, just a short note to let you know that I have used your device for setting the carbs on my 1964 BMW.
After making a fixture to set up the carbs for drilling and tapping a port for the hose barbs I refitted the carbs and proceeded to tune them using your vacuum gauges ( yes I did have to have them upside down like you say).
Well in spite of my best efforts previously I was surprised to find just how far out my settings were , now the bike is 100% compared to before thanks to your cabtune system.
Regards Jxxx.
From: Kxxxx Exxxxxxx
Sent: Thursday, October 27, 2011 3:47 AM
I just thought i would let you know that your carb tool is great. I just got it today and i hooked it up and gave it a try and man its alot better than any of the other ones that i have. Its really easy and its a very good way to get the carbs fine tuned. So i just wanted you to know this and to say thank you ...Kxxxx Exxxxxxx
From: Bxxxxxx Rxxxxx Mxxx
Sent: Tuesday, October 25, 2011 7:31 PM
Hello Mr Morgan:
Just to let you know I have now checked out (and used) the contents of the package and it all looks and works very well, the carrycase is a plus to keep everything mess free. I have now synchronized the starter valves on my 2003 Honda VFR800 and the difference is definitely palpable. Smoother idle and finer response to small throttle inputs... the bike was running very rough, but you don't appreciate just how much until you perform this maintenance (90,000 km on the bike and never been done... ...
Many thanks,
Bxxx
From: Mxxxxxx Bxxxxxx
Sent: Monday, October 10, 2011 8:50 PM
Mr. Morgan,
My package arrived Friday, October 7th. I used my carbtool this weekend and loved it. With a little guidance from the instruction booklet, I found the process very simple and easy (and actually fun). I had considered getting a more expensive dial guage setup initially before researching my options and I'm very glad I went with the Carbtune. Thanks for everything.
Mxxxxxx Bxxxxxx
From: txx.hxxxxx
Sent: Monday, September 26, 2011 10:43 PM
Subject: To Quote The Who "The BEST I ever had"
I have been using your Carbtune product for well over a year now and I am very happy with it's performance. It took a little trial & error to train myself with the finer points of it's use and care but the results are fantastic. I have owned / used many other carb sync gauges / products and given them all away or thrown them in the trash. Many happy customers, one said "It's never idled so smooth".
Thanks
Txx Hxxxxx
Owner/Chief Mechanic
AXX Cycle Shop
From: "Bxxxx" <bxxxxxxxxxx@gmail.com>
Sent: Monday, September 26, 2011 10:09 AM
I bought a Carbtune and used it on the Triumph Thunderbird 900 yesterday. It
is hard to convey the change in words. It has gone from three singles
fighting each other to one triple cylinder engined bike running smoothly and
beautifully.
The Carbtune is a great product. Well done.
Bxxxx
Sent from my iPad
From: Hxxx Kxxxxx
Sent: Sunday, September 25, 2011 9:55 PM
Beste mensen van Morgan Carbtune Ltd
Ik heb een carbtune pro set gekocht en wil u dit zeggen : Zeer goed product .
Duidelijke uitleg hoe en wat te doen , resultaat : een prima lopende motor .
Ik bracht altijd mijn motor naar de dealer om het blok te laten carbtunen , kostte mij elke keer 1 uur arbeidsloon ,
dit geld kan ik nu in mijn zak houden + op deze manier is het onderhoud aan je eigen motor nog leuker geworden .
( ik rijd een Honda ST 1100 Pan European 2001 )
Met vr. groeten van een tevreden klant .
Hxxx Kxxxxx
From: "Dxxxxx Wxxx"
Sent: Tuesday, September 20, 2011 9:33 PM
Hi Sean
I just wanted to give you feedback on my purchase of your Carbtune Pro. I
couldn't wait to use this on my 2004 R6 after receiving it the day after
ordering online in an easy and efficient online transaction. The device was
SO easy to use and very professionally finished! My bike now runs so much
smoother throughout the entire rev range with MUCH less vibration through
the pegs/bars/tank and idles considerably better. I had so much fun using it
and can't wait to use it again!
Thank you
Dxxxxx Wxxx
From: Gxxxxx Ixxx
Sent: Thursday, September 15, 2011 1:45 AM
Sean,
Recieved my colortune today 14 Sep. I immediately went to work on my 79 BMW R80/7. I got the mixture right and then synced the carbs in no time flat. I was amazed how quick and easy it was. I was also suprised at how a tiny adjustment could make a big difference. I could not have done this by ear. Thank you for a terrific product.
Sincerely Gxxxx Ixxx
From: rxxxxx jxxx
Sent: Tuesday, August 30, 2011 10:11 AM
Hello Sean,
Last weekend i've used the carbtune and it works flawlessly!
Used it on an ducati 748.
I'm very pleased with the result!
Regards,
Rxxxxx
From: "Rxx Axxxxxxxx"
Sent: Monday, August 29, 2011 7:34 PM
Hello Sean,
It was a breeze to sync the carbs on my 1995 Triumph Sprint.
Had to use it upside down (like described in BMW procedure) as vacuum was surprisingly low.
Instant improvement in engine performance!
Thanks and regards,
Rxx
From: Bxx Txxxxxx
Sent: Friday, August 05, 2011 7:41 PM
Owning a 2003 Bandit 600 is great. It just got a whole lot better when I bought the carbtune kit and tuned the carbies. They only needed a minor tweak, but it made such a difference. It revs to the red-line now so smoothly and cruises so well. A good investment €“ get a set. Ride safely.
From: Mxxxx, Gxxx
Sent: Tuesday, August 02, 2011 11:16 AM
That€™ great thanks for the reply,
For the record, your vacuum gauges have now proven themselves to be the single most significant investment in my bikes overall performance. The bike runs smoother, has more power and uses less fuel as a result of a fiddly but quite simple tuning procedure. I only wish I had bought a set the first time I considered some nearly 12 months ago. A new bike for 60 quid, a bargain!
Regards,
Gxxx Mxxxx.
From: "Lxxxxxxx A Dxxxxxxx Jr"
Sent: Sunday, July 24, 2011 6:16 PM
Sirs,
Guess I should have waited a couple of more days before I wrote my first email to you. I received the carbtune yesterday (23 July) and have already used it! Awesome product and my 2005 Yamaha Royal Star Tour Deluxe runs as smooth as silk! Thank you very much!
From: Bxxx
Sent: Friday, June 17, 2011 6:00 AM
Hi Sean -
As they say in the UK, "Very nice bit of kit!" I'm a product development engineer, so I appreciate what has gone into this device.
It's simple and works great. My BMW is happy.
Best regards,
Bxxx Cxxxxx
From: Dxxxxx Mxxxx
Sent: Thursday, June 09, 2011 3:46 PM
Dear Sean,
My carbtune was delivered last tuesday morning, so the estimation of 2 weeks for deliverytime you gave in the previous mail was accurate.
Anyway, I synchronized my bike yesterday with it and it was almost too easy. I really think taking candy from a baby is more difficult.
And the throttle response, which was really terrible, is now in one word perfect. It's a perfect tool, easy to use and only 3/4 of the price that I would have to pay the dealer for doing it for me.
Thanks for everything, and untill the next order. Good luck with your business.
Kind regards,
Dxxxxx Mxxxx (a very satisfied customer)
From: Bxxx Pxxxx
Sent: Friday, June 03, 2011 10:41 PM
Sean my name is Axxxxx Pxxxx 3xxxxx/060111/42. I ordered a Carbtune Pro some time ago .....As I told you when it arrived, I would have to wait for warmer weather before I could try it out. Well it finally warmed up and I was able to use it to balance 2 outboard motors. Both were 4 stroke, 4 cylinder motors. I have to say I was very impressed. The columns were very stable and the whole unit is very user friendly. It was worth the wait. THANKS FOR THE GREAT PRODUCT AT REASONABLE PRICE.
From: Jxxx Jxxxxxx
To: Morgan
Sent: Wednesday, May 25, 2011 2:35 AM
I received the unit last Friday (very fast delivery) and have already used it to tune the carbs. It worked great and really made a difference in how smooth it runs. Thanks for a terrific product!
John
From: "Jxxxx Bxxxxx"
Sent: Monday, March 28, 2011 10:46 AM
Hi
Just wanted to let you know, I used my Carbtune for the first time at the
weekend, following a check and adjustment of the valve clearances on my '99
R1.
I was really impressed, it was very easy to set up and use.
I used to get my carbs balanced annually by my local bike shop.... but not
any more! Great product, great service [it arrived the next day]
I look forward to using it for many years to come. Thanks for such a
brilliant product.
Jxxxx Bxxxxx
From: Txx Cxx
Sent: Friday, March 18, 2011 8:32 PM
I purchased your carbtune through another source. All I have to say is.... god bless you're a genius! Absolutely the best tool I have purchased next to my miller syncrowave 250 that's saying alot!! Thank you!
From: Cxxx Mxxxx
Sent: Saturday, March 19, 2011 10:32 PM
i got my gages in and they work great thanks good product .
From: "Bxxxxx"
Sent: Tuesday, March 08, 2011 4:49 PM
I received my Morgan Carbtune on 23 Feb. Pretty fast service!! I used it two days later to sync the carbs on my Kawasaki ZG1000. First time I have ever done that on any bike. It was the final step in my spring tune-up. I can honestly say the bike runs the best it ever has. I used to have a very slight stumble in the 2,200-2,800 rpm range and it is now gone. None of my carbs was grossly out of balance with the others according to your device, but because of its accuracy, I was able to get them very close. It made a difference. The bike is very smooth at all rpm now. Nice tool. Good instructions, easy to use. Glad I bought it!
Thanks,
Sxxxx Bxxxxxx
Sutter Creek, CA USA
From: Kxx Dxxxxx
Sent: Tuesday, March 08, 2011 8:44 AM
Hi all at Morgan Carbtune.
Just a note to say that the €˜Carbtune Pro 4-column and Toolpouch€™ arrived safe and sound on Saturday 5th Feb 2011.
Spent a few minutes cutting the tubes to add the dampening and then a couple of hours balancing carbs on my 1987 Suzuki GSX1100F (most of the time went into getting bike ready to use the Carbtune).
I have never balanced carbs before but found the instructions easy to follow and bike now sounds and runs as it should.
Great product and great service from you.
Thanks to you all
Regards...Kxx
From: Sxxxxxxx Rxxxxxx
Sent: Monday, March 07, 2011 8:24 PM
Carbtune Pro has arrived today at my place in Romania. I`ve inspected and tested the "jewel" and is great! I`m fully satisfied!
Thank You and best regards.
Bxxxxx Sxxxxxx
From: "Axxx" <axxxxx@iinet.net.au>
Sent: Thursday, March 03, 2011 1:50 AM
Hi Sean
Just a quick thank you.
Have been in the process of rebuilding a set of three Del Orto PHF32 carbs. Latest parts arrived the other day.
Stripped, cleaned and reassembled carbs with new jets, neeedles, valves etc etc...
Used the carbtune instead of a set of guages.So easy, to the pont where I managed to get the idle PERFECT, with so much less effort. Almost unattainable with guages. Got the idle down to around 350 rpm. Usually unheard of in a 180 degree crank engine. BRILLIANT !
Carbtune so easy to read, compared to guages, and appear to be far more accurate. Great stuff.
Thanx again, Axxx
From: Txxx
Sent: Thursday, March 03, 2011 6:39 AM
Subject: Excellent sync tool
Hello Morgan carb tune. I would like to commend you on an excellent tool, for balancing mulitiple carb. I just used your wonderful tool, and not only is it accurate but easy to read, did I mention accurate€.Thank you. Well worth the wait for it get to me all the way to Hawaii€
From: Axxxx Bxxxx
Sent: Wednesday, February 09, 2011 9:07 AM
Subject: Fantastic
Hi. Recieved my colout tune last evening and couldnt wait to use it on my 1976 z900 kawasaki. I am no good with carbs and have been struggling with my setup for months. 15 minutes and she run like a clock. Fantsatic idea , wish I had got one sooner.
Thanks guys.
Axxxx in Oz
From: "Rxxxxxx Sxxxxx"
Sent: Tuesday, December 21, 2010 3:13 AM
Hello Sean,
I just wanted you to know that my carbtune showed up today- thank you!
Looks like a quality product, and I cannot wait to try it out. Also I wanted you to know that I think that the case that comes with it is great. I cannot imagine having ordered the carbtune without it! Have a great Xmas,
Rxxxxxx Sxxxxx
California, USA
From: jxxxx hxxxxx
Sent: Wednesday, December 15, 2010 2:57 AM
Hello, I just want to start off by saying the product(Carbtune Pro) is absolutely amazing. It works perfectly and I have used it on multiple bikes with great results. I have many technician friends that i have suggested they try it out. One of my friends runs his own shop and he has now thrown away his mercury and blue liquid gauges and switched to the Carbtune and his initial reaction was the same as mine, "wow." I found out about your company through a forum and did some research and came to find a 100% positive review of the Carbtune everywhere. I wish your company the best and was wondering if there was a way for you to market the product in the states because here we are stuck with mercury or the "blue liquid" style gauges which are equally crappy and still cost more than your product(which is worth more than I paid and arrived quicker than I could have imagined).
Thanks,
Jxxxx Hxxxxx from Savannah, GA
From: Dxxxxxx Zxxxxxxx
Sent: Saturday, December 04, 2010 6:48 PM
Dear Mister Morgan,
The parcel arrived yesterday afternoon, must say that I'm very pleased with the Colortune, it's a wonderful piece of equipment. The Carbtune was for my brothers birthsday, so we'll be testing it tomorrow.
Thanks again, have a nice weekend!
Dxxxxxx
From: Ixxxxx Moto Ltd
Sent: Monday, November 29, 2010 4:25 PM
Subject: 90 degree screwdriver.
Hi! Thank you for the prompt despatch of the 90 degree screwdriver, ordered on Thursday, arrived first thing Monday morning.
As a professional bike technician for nearly 40 years it take a lot to impress me. I'M IMPRESSED!!
The tool is top notch and your service exemplary.
Just as a matter of interest, the Kawasaki official service tool is not a patch on yours but is over £230 pounds.
Thanks again
Best regards
Sxxxx Rxxxxx.
Ixxxxx Moto Ltd.
From: Nxxx Wxxxxxxxxx
Sent: Saturday, October 30, 2010 4:26 PM
Just thought I'd drop you a line to say thanks very much for sending me the Carbtune Pro - very fast delivery and it is a quality piece of kit that works very well indeed. Tried it out today and it has made a big difference to the way my 1979 Superdream runs!
Cheers
Nxxx, East Lothian
From: Axxxxxxxx Mxxxxxxxx-txxxxx
Sent: Sunday, October 24, 2010 7:16 PM
Hi thanks for the speedy delivery, tuned my yamaha thunderace and the diffrence was huge with so much more power and smoothness. thanks axxx m t .
From: Mxxxxxx Rxxxxxx
Sent: Saturday, October 23, 2010 2:37 PM
Thank you, received your Carbtune today. Boy what a nice unit I had an idea what it would look like ; I was wrong It is so sophisticated and nice. Thanks now to get the hose set up, then balance my Venture and my new XVSC Yamaha. Thanks
Mxxxxxx Rxxxxxx Calgary Alberta. Canada.
From: "Cxxxxx, Ixx"
Sent: Friday, October 15, 2010 3:08 AM
Hi Sean
Received the Carbtune kit .Thank you took about ten days to arrive. I am
impressed by the ease and accuracy of the instrument both my bikes have
never run better.Your product is a god send from what can be a hard task now
is very simple and easy.I would recommend your product to my friends
Regards
Ixx Cxxxxx
From: Wxxxx Dxxxxx
Sent: Wednesday, September 29, 2010 8:29 AM
Dear Sean,
Thank you very much again. Thanks to your carbtune tool my CB1300 (2006/40.000km) runs now smooth like velvet again.
You did a good job!
Best regards,
Dxxxxx
From: mxxx dxxxxx
Sent: Monday, September 27, 2010 10:43 PM
Hello, recieved my carbtune pro in 7 days from ordering, delivery to california, packaging was excellent, synced the carbs on my 82 honda cb750k, tool works great, I was able to dial them in really close and it runs much smoother now, great product, would recomend to anyone,,thanks, mxxx dxxxxx, palo alto california...
From: mxxx.xxxxxx@xxxxxxxxx.co.uk
Sent: Friday, September 24, 2010 12:12 PM
Hi Sean,
I received the carbtune yesterday and just wanted to say what a great product it is. I have managed to set up the twin 40s on my Lotus Esprit Turbo and now the engine runs very smooth with great pick up. Many thanks and best of luck.
Kind regards,
Mxxx Rxxxxx
From: Dxxxx Lxxxxxxx
Sent: Friday, August 13, 2010 2:22 PM
Hello Sean Morgan, just to let you know my order arrived this morning. My carbs are now balanced and the bike's running sweet.
Thanks for dispatching the item so promptly, great product and great service. I'll be sure to recommend the carbtune (and how easy it is use) to others.
Thanks again.
Dxxxx Lxxxxxxx.
From: Hxxxxx E.
Sent: Thursday, August 12, 2010 5:23 PM
hi ;)
today , i´ve received your tool .
i´ve adjusted my carburator satisfied also today (in only 5 minutes :) ) .
the function of your tool is really great !!
many thanks !
Best regards
Bxxxxxxxx Sxxxxxxxx & Hxxxxx Exxxxxxxxx
From: "Jxxxx,Axxxx,Technical Services"
Sent: Wednesday, August 04, 2010 6:06 PM
Hi - just wanted you to know it arrived a couple of days later in perfect
condition.
Here's a quick testimonial for you -
I bought the Carbtune and the adjustment tool to work on my 1981 CB900F. I
was impressed with the quality of the tools and the storage pouch for the
price, which was very reasonable even after shipping charge, duties and
currency conversion. I read the instructions, cut the tubing, installed the
restrictors, and had the Carbtune on my bike in less than 1/2 an hour. I was
amazed at how easy it was to use, and I had my idle (tick over for you in
the UK) purring in no time. The bike is running great, and at the price my
mechanic charges to balance the carbs, the tool paid for itself on the first
use. I will highly recommend this to my friends. Next step is to get the
Colortune so I can optimize my fuel mixture.
Thanks for a great product,
Axxxx Jxxxx
Hamilton, Ontario
Canada
From: D Cxxxxxx
Sent: Sunday, August 01, 2010 9:42 PM
Many thanks for the prompt delivery, received order on Sat 31st July, that is Quick!!
Very happy with carb balancer, so easy to use, I have now synced the carbs on my Kawasaki ZZR1100 and was able to set them up perfectly with no problems at all, highly recommended, great piece of kit.
From: Jxx Mxxxxx
Sent: Monday, July 05, 2010 2:05 PM
Hi Sean
I received your Carbtune on 1 July 2010. We have a bit of a holdup in the mail with the Soccer World Cup and what not.
Thank you for your prompt service. I used your product on my Moto Guzzi Le Mans and I must say - your Carbtune is all that it is cracked up to be - easy to set up and easy to use and clear instructions. Balancing carbs had previously been a nightmare with fluttering needles and stuff that go haywire. I shall certainly recommend you product and your service.
Jxx Mxxxxx
Pretoria
South Africa
From: Txxxxx Cxxxxxxx
Sent: Sunday, July 04, 2010 1:33 PM
Sir,
Just want to sing your praises re your product.
I purchased the above several years ago but had never used it until recently when I balanced my son€™s nt650 deuville Honda.
The drastic change that this procedure made to his motorbike was amazing to say the least. The bike is pulling better from a start, fuel economy is up and top end power and speed is also up.
Hoping to check my own pan st1100 shortly.
Thanks for a great product.
Txxxxx Cxxxxxxx
Londonderry
From: Dxxx
Sent: Tuesday, June 29, 2010 4:58 AM
I just received my carbtune here in Grimes Iowa USA and just thrilled it works perfect. I have three
inline four old Kawasaki KZ 750 s. I tuned two right up and they have never run so good. They run so
smooth and pull hard I have never had them run like that. The last one I could never get to run right
I have had the carbs off a hundred times could never get it to idle and pull. It has no vacuum at
idle. The cam must be off one tooth. I will pull the top end off tomarrow. I am so happy to have found
the problem, I will get it running right tomarrow.
Thanks again from one happy customer.
Dxxx Dxx
From: zxxxxxxxxx
Sent: Sunday, June 27, 2010 9:21 PM
Just wanted to say your carbtune makes tuning carbs a piece of cake, I have done several bike carbs
and just got done with my yamaha outboard carbs. Been a long time since I have been so jazzed about a
tool, Thanks again.
Mxxxx.
From: "Bxxxx Hxxxxx"
Sent: Friday, June 25, 2010 11:43 AM
Hi Sean,
Just to let you know that I received my Carbtune in the post on Wednesday
morning 23rd June. Really pleased with the delivery time. Looks to be a well
made piece of kit. Used it on Thursday to balance the starter valves on my
Honda VFR800. So easy to use, instructions very comprehensive and the end
result exceeded my expectations.
Thanks for such good service.
Regards.
Bxxxx
From: "Sxxxxxx Fxxxx"
Sent: Wednesday, May 26, 2010 8:43 AM
Hi Sean,
I just wanted to let you know that I have received the Carbtune today
05.25.2010 in perfect condition. I have already tried it out and what a
difference synchronizing the carbs did for my 87 Honda Magna. It runs like
new! I really like the tool and the shipping to Hawaii from UK was very
fast! Thanks for the A+ service!
Sxxxxxx
From: Oxxxxx Dxxxxx
Sent: Friday, May 14, 2010 8:26 AM
The order arrived last friday(the 7th). Tested it, working flawlessly, great product, thanks a lot.
Hope you sell a million of them(or more)!
Romania
From: Ixx Dxxxxxx
Sent: Monday, May 10, 2010 3:15 PM
Dear Carbtune,
I just wanted to drop you a quick note to tell you how great your product is. It arrived this morning.
It only took me a few minutes to put together the dampers, hook it up to my beloved 23 year old VMAX
and within 20 minutes she is roaring like the Lion she is!
I looked around for a €œprofessional€ mercury monometer (almost $1000.00 cdn), and I€™ve also attempted
the service manual technique of a single gauge matching each carb to #1 (don€™t try this, it€™ll drive
you to drink). Your tool works wonderfully and is also very reasonably priced.
To put it into perspective, local shops charge two labour hours to perform this service. The average
shop in my area charges around $100.00 per labour hour. My bike needs to be set up every season. So,
for an investment of about $125.00 cdn including the import brokerage fee charged by Canada Post, I
have not only saved $75.00 this year, but $200.00 per year from now on. Not a bad ROI!
Thanks again for making such a great product.
Regards,
Ixx Dxxxxxx
From: Axxxxxx Pxxxxx
Sent: Sunday, May 09, 2010 3:59 AM
Hi Sean,
I received the balancer and I did my friends Bandit 400 yesterday. what a awesome tool... Thanks. I'll
place the order for Colortune soon.
Best Regards,
Axxxxxxx.
From: "Bxxx Wxxxxxxxxx"
Sent: Friday, April 23, 2010 1:25 AM
Balanced the carbs, bike runs very smoothly.
I previously used mercury sticks to do the job, but I think this unit is
better.
Bxxx. Australia
From: Axxxxxx
Sent: Tuesday, April 20, 2010 10:13 PM
Hello Sean,
I have received very quickly the Carbtune and Toolpouch, congratulation for the excellent service, I
have tried the carbtune, it is an excellent product.
Best regards,
Axxxxxx Fxxxxx.
From: Bxxxxxxx Gxxxxxx
Sent: Tuesday, April 20, 2010 9:36 PM
Hello Sean !!
I received packet today
Many Thanks for additional HV lead
All is perfect - like my last order
and I tested Carbtune for proper work
All is perfect - without any unevenness that indicated I tested by legalized vacuum tester --- and air
leak for all column is exactly the same
for all. Many thanks for perfect tool
I synchronize somethime engine for ultralight aircraft throttle response and engine effectivity is
perfect
BEST REGARDS
Bxxxxxxx Gxxxxxx
From: Bxxxx Hxxx
Sent: Tuesday, April 20, 2010 2:34 AM
Sean,
I just pulled my colortune kit "A" from the mailbox. My 1982 Suzuki GS850 is already running WAY
better. It totally took the guess work out of setting up my idle screws. The packaging is clean, the
instruction booklet isn't just an instruction on the colortune, but an in depth explanation of
carburators and combustion.
Big thanks from the great white north.
Bxxxx
From: txx qxxxx
Sent: Wednesday, April 14, 2010 9:16 AM
Hi,
I have received my "Morgan Carbtune" in the post this morning, a friend of mine who has a workshop in
Trim Co Meath "Pxxxxx Motorcycles" After both himself and myself had trawled the Internet for a
reliable carb sync. and both landed at the door of yourself, He bought his some months back... i
however wasn't so quick lol, delighted with your product and have used his one when down in his
workshop so i knew what to expect. A1 first class customer service and i gather the item would have
been posted Monday and here in my workshop on Wednesday at 7.30am!!! I especially like the email to
confirm that the order has gone through, in the unlikely event that my carbtune gets broken i will be
back to you for another one :). Hope your business flourishes as i am one happy customer have a great
day.
From: Fxxx Vxxxxxxxx
Sent: Thursday, April 08, 2010 9:39 PM
Good afternoon Sean,
Carb tune arrived today, works brilliantly!
Thanks
Fxxx
From: dxxxx fxxxxx
Sent: Thursday, April 08, 2010 1:41 PM
Order arrived today in perfect condition,
This is without doubt the best and easiest carb tuning device i have used, once the device was set up
(5 minutes), the throttle bodies on the bike were then balanced in less than 5 minutes.
Many thanks for a very swift dispatch
Dxxx Fxxxxx
From: rxxxx@aol.com
Sent: Monday, April 05, 2010 4:33 PM
Thanks!
Greatly appreciated.
BTW I have already used the carbtune. A friend let me borrow his a while back and I was so impressed
I decided I had to have one of my own. I have used gauges, other liquid filled systems and even a 4
column mercury filled manometer (long time ago!). This beats them all. A simple well designed
product that does exactly what's needed.
From: "Bxxxx vxx Hxx"
Sent: Saturday, March 27, 2010 6:11 PM
Hello,
carbtune got delivered today. Great tool. I already used it to tune-up my BMW K100RS 1984. It had been
running rough for the last few months. With the Carbtune it became obvious that it was pretty out of
sync. After adjustments it runs better than ever. Great tool, feels good, reads clear and nicely
packed with the pouch.
Thanks for the service.
Bxxxx vxx Hxx
Netherlands
From: Mxxxxxx hxxxx
Sent: Wednesday, March 17, 2010 6:39 PM
Hi Morgan,
I have never had so much fun and satisfaction when tunning or installing a new part in my motorcycle,
till now. Your carbtune device is excellent. It helped me sync the carbs which were insanely out. And
now, i am amazed at the difference at which the motorcycle is performing. Its incredably smooth and
responsive!!! Thank you so much.
Regards
M.H Pakistan
From: Rxxx, Ixx
Sent: Monday, February 08, 2010 10:28 AM
I managed to convince my daughters that for Xmas I would like one of your Carbtune balance gauges to
tune my BMW R1100RT. They purchased for me the four column unit (just in case I ever get a multi!)
which I used for the first time over the weekend just gone.
I was absolutely impressed with your product €“ it is a fine instrument and I achieved the best set up
the bike has ever had!! I have owned the bike since new, in April 2000, and it has covered some
90,000 miles and has previously been set up by BMW during routine services. I was somewhat surprised,
then, when the balance I achieved yielded a much sweeter running machine than I€™ve ever known it to be
before!
I have run BMW twins since 1978 €“ they are my preferred motorcycle, but balancing the €˜pots€™ has
always been something of a pain. Not with the Morgan Carbtune €“ the result was truly spectacular and
I would recommend your product to anybody both on function, performance and price. My only regret is
that I never bought one before!!!
So, many thanks for making my life easier, and my motorcycling more enjoyable!!
Best Regards,
Ixx Rxxx
From: Rxxxxx Wxxxxxxx
Sent: Friday, February 05, 2010 5:46 AM
To All,
Received my Carbtune today. Earlier than expected. Thank you. I am glad I ordered the toolpouch, it
makes such a neat, tidy and protective package. I am reading the instruction manual and am impressed
with how it is written. I'm hoping that I'll have time this weekend to put it to use. But for sure,
in the very near future. I will be using it on my recently obtained 2007 FJR 1300. From all that I
have read in the FJR forums, I am sure I will be happy with it.
Thanks again,
Rxxxxx Wxxxxxxx CA, USA
From: pxxxx bxxxxxxxxx
Sent: Wednesday, January 20, 2010 5:12 PM
order number 2xxxx/140110/xx just to let you know got the carbtune on monday morning 18/01/2010
everything sound just after tuning me bike their now a 02 gsxr 600 worked a treat great product would
highly reccomend it easy to use easy to follow instructions 10/10 good work lads. pxxxx bxxxxxxxxxx co
mayo
From: Mxxx
Sent: Wednesday, January 20, 2010 7:39 AM
Hello,
Bought a set of 4 column Carbtune Pro ............ and they are absolutely brilliant. Glad i didn't
buy Mercury ones. My Kawasaki 750 Carbs were all over the place and 5 minutes later they were almost
perfectly level. Wonderful product and so easy to use. I will spread the good word about them in my
area.Many thanks and all the best,
Cheers, Mxxx. Queensland, Australia.
From: "Mxxxxx,Pxxx
Sent: Friday, January 08, 2010 6:47 PM
Ecellent service ordered at 6:30 am Monday arrived 10:00 Thursday , straight
out to the garage set it all up did the job in no time bike sounds and rides
a treat, great bit of kit.
Pxxx , York
From: "Jxxxxx Mxxxxx"
Sent: Saturday, December 26, 2009 6:08 PM
Hello Sean,
I've used the carbtune today for the first time (yes, also my first time)
It was pretty straight forward, but nonetheless the improvment is gigantic.
The bike was last adjusted in june 2009 by an official honda dealer,
and now, after 7000Km it seems that the adjustement was all messed up.
After adjusting the bike could run as low as 800 rpm (1050 is normal)
without dying! (altough at that speed the oil pump could not keep up).
Today I am even more convinced that the carbtune is a great tool!
regards, and happy holidays,
Jxxxxx
From: "Bxx Vxx Mxxxxxxx"
Sent: Thursday, December 24, 2009 4:39 AM
Hi Sean,
As you requested I'm letting you know I received my Carbtune. It arrived here yesterday 23/12. I tried
it right away and I must say it works very well. I had my
carbs synced in no time.
Great product.
Thanks,
Bxx Vxx Mxxxxxxx
Belgium
From: cxxxxxx
Sent: Wednesday, December 23, 2009 7:09 AM
Morgan, I hope that's correct, I recently purchased your Carbtune pro 4 kit for setting carbs on
Goldwings, I have an Goldwing service shop ........ I have done two set-up this week and I must say
Bravo!!! even on the 1200 wing that was running good I was impressed with the difference, but on the
bike that was a little sick, Its like I rebuilt the carbs, I,m very impressed and will be grateful
for your product for some time I,m sure, ...
Cxxxx @ Kxxxxxxx wing
From: "Mxxxx hxxxxxxx"
Sent: Tuesday, October 13, 2009 6:16 PM
Hi MorganMy order arriwe today. thank you very mucht. product work perfektly.
now my bike run like it is new again.
Best regars
Mxxxx (Finland)
From: "Cxxxxxxxx Axxxxxx"
Sent: Saturday, October 10, 2009 3:27 AM
Subject: great Buy great shipping great tool ! tkx
canada received it in 8 days !! I just use it yesterday work better than the mercury ones I have used
before !! thanks guys I wish I would nt have takink me so much time to lear about your product on my
searches I was just about to buy a crappy motion pro one ... ouf that was close !! I m very happy
keep it up thank cxxxxxxxx
From: Rxxxx Axxxx
Sent: Wednesday, October 07, 2009 4:22 AM
Morgan,
Checked the mail this morning (Tuesday) to find my carbtune had arrived. I unpacked it and after
reviewing the instructions, I installed the damper tubes and tried it out on my 03 Bonneville. Turned
out the carbs weren't too far out, but the process was quick and easy with the most difficult part was
getting a screwdriver on the adjustment screw! I am anxious to try it out on my 68 Triumph T100R next.
Thanks for your first class product and quick service, I would recommend it to anyone.
Cheers,
Rxxxx Axxxx
From: Hxxxx, Gxxxx S.
Sent: Thursday, October 01, 2009 5:19 PM
Hello Sean.
I received my order on Saturday September 26.
Thank you for the quick service. I have ordered parts on line in the past from suppliers located in
the US that have taken longer to arrive than the order I placed with your company located in the UK.
I used the Carbtune to adjust the carburetors on my 1999 Yamaha Vmax and it worked very well.
The bike now idles and runs much better.
This is definitely a quality instrument and I would recommend it to anyone who needs to fine tune
multi carbureted motorcycles.
I really like the storage toolpouch too. It will certainly help protect the Carbtune from accidental
damage while in my toolbox.
Thanks again!
Gxxxxxx Hxxxx
From: "Kxxxxx Cxxxxxxx"
Sent: Thursday, September 17, 2009 7:07 PM
Subject: Great Product
Hi Carbtune,
Just to let you know my Carbtune order arrived safely and on time. Following the instructions enabled
me to sync the throttle bodies on my SV100S quite easily. What difference it made, bike runs so
smoothly now.
What a brilliant product,does exactly as described on the website, it only took a few minutes once the
airbox was off.
I can't wait to use it again!!
Many Thanks,
Kxxxxx.
From: Jxxx Fxxxxx
Sent: Wednesday, September 16, 2009 2:58 PM
Hi
Just a quick note to say Carbtune arrived on Thursday 10th Sept, already balanced a VF750 an FJ1200
and a 600 Bandit. All successful. In particular the VF750 (my machine) feels like the engine has been
removed, it is so smooth!
Thanks
Jxxx Fxxxxx
From: Jxxx Sxxxx
Sent: Monday, September 14, 2009 7:18 PM
Recieved my kit in the mail Saturday,Sept.12th. Pretty good time .... to my little part of Texas.
Looks like first rate quality and can't wait to use it when I find some time to do so.
The tool pouch is a winner also,glad I bought it.
Thanks,
Jxxx Sxxxx
Nocona,Texas
From: Bxx Bxxxxxx
Sent: Monday, September 14, 2009 12:15 AM
Subject: You tool is great
I had to write and let you know that the carbtune arrived and it is one of the best tools I have ever
owned. Your customer service was outstanding. I thank you for all you and your tool have done to help
me out. My 1976 Honda CB550F has never run so well. Thanks again.
From: Bxxxx Mxxxx
Sent: Tuesday, September 01, 2009 6:09 PM
Subject: product rave
Hi from Canada Sean!
I just wanted to tell you how happy I am with my new Carbtune. It arrived promptly (6 days) and works
like a charm... a really great piece of gear. Both of my 1976 Gold Wings now run like Swiss watches!
I will be recommending the Carbtune to the members of the Classic Wing Club www.classicwingclub.org/
regards,
Bxxxx Mxxxx
Toronto
From: "<x-x-x@xxxxxx.no>
Sent: Saturday, August 29, 2009 8:16 PM
Subject: Re: Your Order at Morgan Carbtune Ltd
Hello Morgan Carbtune Crew.
The parcel arrived today in perfect condition. The carbs are also syncd, and
the tool is a wonderful thing. So easy to use, and the result was perfect.
Thank you very much. I am a happy customer.
Best regards
Hxxx in Norway
From: Wxxxx & Lxxx Bxxxxxx
Sent: Saturday, August 22, 2009 7:58 PM
Hi,
Just thought I would let you know that I recently purchased one of your Carbtune Pros. Shipping was extremely
fast to the West Coast of Canada. I finally had the opportunity to synchronize the carbs on my Valkyrie. I
thought it was running well before but was blown away by the improvement after the carb sync. This was the first time
I had synchronized carbs and found your gauge extremely easy to use. Another very satisfied customer.
Thanks,
Wxxxx
From: lxxxxxxxx@cxxxxxxxxx.net
Sent: Sunday, August 23, 2009 12:17 AM
Sean,..... , I did get to use my Carbtune. Using it was definitely a switch from the mercury synchronizer that I had used until now. It was so much quicker due to the much more stable readings. With the mercury synchronizer I really had to guess as to what the reading for each cylinder was. My bike is a Honda Valkryie with the 1500 F6 engine. It has never ran better than it does now. Thanks for one very accruate tool.
Lxxxxx Bxxxxx
From: Sxxxxx Rxxxxxx
Sent: Wednesday, August 12, 2009 7:03 PM
Hi Sean,
I ordered a carbtune from you monday afternoon and i have recieved it today (wednesday) safe and sound.
What an excellent piece of kit and so easy to read and use. Many many thanks for a quick and hassle free transaction.
All the best.
Mxxx Rxxxxxx.
From: "Cxxxx Bxxxxx"
Sent: Friday, June 26, 2009 11:42 AM
Hi Sean, Thanks so much for the best service. I received the Carbtune Pro today. That's incredibly fast to New Zealand.
I ordered it on Saturday night the 20th June our time and it arrived at my work today the 26th June. I am pleased with
the quality of the product and I am looking forward to using it on my Bike.
Thankyou,
kind regards, Cxxxx Bxxxxx (New
Zealand).
From: Gxxx Lxxx Wxxxx
Sent: Wednesday, June 24, 2009 3:10 PM
Subject: A tool that pays for itself with the first use I just received my Carbtune Pro and synch€™ed my carbs€holy #@$% €my 2001 ZX-7R feels like a brand new bike again! The Carbtune Pro is magic! Thank you for making a quality tool and selling it for a reasonable price,
Gxxx Lxxx-Wxxxx
From: <jxxxxxxx@mxx.ca>
Sent: Monday, June 15, 2009 2:07 AM
Hi Sean,
I used the Carbtune today. It's the first time I've ever sync'd carbs and the Carbtune made it easy. I had the sync'ing done in about 30 minutes.
Thanks for a great product. Money well spent.
Jxxx
From: Dxx Ixxxxxx
Sent: Sunday, June 14, 2009 1:07 PM
Hi Morgan,
I received the CT Pro and 90 screwdriver. This was my first sync on the Suzuki. Just wanted to let you know that both tools worked great for the Suzuki. CT Pro worked great, following your instructions wrt restrictor made the reading very steady. And, I would recommend the 90 screwdriver as it does make the job much easier. Thanks for the service and great tools!
Dxx
From: Cxxxxxxxx
Sent: Saturday, June 13, 2009 6:17 PM
Bonjour,
J'ai bien reçu mon Carbtune. J'ai pu régler la carburation de ma moto Yamaha 1300 Royale Venture. C'est super, et je pourrai le dire à d'autres motards.
Encore merci.
From: "Rxxxxx Hxxxxx"
Sent: Thursday, June 11, 2009 8:10 PM
SEan:
Just finished the carb sync. What a GREAT piece of equipment. Solid as a rock!
Thanx again..
...bxx...
From: exxxxxxxxxxx@comcast.net
Sent: Friday, June 5, 2009 00:17
I got my carbtune today 6-4-09 and am very happy with the design and instructions, I dialed my bike just a few minutes ago and it is running great, it sure beats the mercury guages.
Thanks Ex Pxxxxxxx
From: B S
Sent: Wednesday, May 27, 2009 4:04 AM
Mr. Morgan,
Thank you very much for such a smooth transaction. I received my Carbtune in exactly 10 business days from the time of order and it worked flawlessly. The instruction were very straight forward and with the help of the Carbtune my bike is running better then it has in years. I would also like to recommend to anyone that might read this to purchase the tool pouch. It does add to the cost but, it is very high quality and definitely gives piece of mind by protecting the Carbtune while it is in storage.
Once again, thank you very much for such a great business experience and a invaluable tool.
Sincerely,
Bxxxx S.
Florida, USA.
From: Txx Dxxxx
Sent: Sunday, May 24, 2009 12:41 AM
The carbtune showed up today , I tried it out right away . This thing is top notch ! and it's far easier to use than the junky old vacuum gauges or the easily spilled mercury filled synchronizers . money well spent ,
Thank you ....
Thanks,
Txx
From: "Sxxxxxxxx"
Sent: Sunday, May 24, 2009 1:36 PM
Subject: Re: Your Order at Morgan Carbtune Ltd
Got it on 5/20...Nine days I transit. Great instrument! I had my bike tuned up in less than hour and it runs smooth as silk. Best wishes for continued success.
From: Dxxxxxx Hxxx
Sent: Wednesday, May 20, 2009 3:38 AM
Sir i have absolute respect for you and your company. I was out waxing my truck today and witnessed the mailman delievering his mail and although i seen him insert a package into my mailbox,but had no idea till later i had ALREADY recieved my CarbTune! Considering i just ordered it last week i was pleasantly surprised and i jus want to say thank you.I hope to do more
biz with your company again someday and again,thank you for such a great product and great attention to shipping!
Dxxxxxx Hxxx VA, USA
From: "Gxxx Txxxxxxx"
Sent: Saturday, May 09, 2009 10:39 PM
The process was as easy as advertised and the bike is running better than ever. The hardest part was getting the vacuum lines pulled off the throttle bodies (stuck on like they were glued). After that, it took about 10 minutes to get them sync'd. The Carbtune tool worked flawlessly. Thanks for making such a great product. It couldn't have been any easier. I'm glad I opted for the custom bag as well. The tool and hoses fit in very nicely.
Gxxx Txxxxxxx
Oceanside California
From: Wxxxx Wxxxx
Sent: Tuesday, May 05, 2009 2:29 AM
Hello again Sean
Just wanted to let you know that I synchronized the carbs on my Honda GL 1100 today and the Carbtune, and the carb tool worked great. Your products are excelent quality and I will pass the word to all my riding friends.
Thanks.
Wxxxx
From: gx
Sent: Monday, May 04, 2009 4:40 AM
Just used the carbtune pro on my old 750 night hawk breathed new life into her sooo.... easy, the hardest part was reaching one of the throttle screws set it up once and then a few days later just to check already more than paid for itself thanks again
Gxxxxx Fxxxxxxx
From: Mxxx Hxxxxxx
Sent: Sunday, April 26, 2009 11:07 PM
Got it done in a little over an hours time, and if my ear is any good, I'd have to say she sounds much, much smoother. Wish I hadn't waited so long to get your product! Thanks for the help and good service!
Mxxx
From: nxxx mxxxxxxx
Sent: Tuesday, April 21, 2009 7:56 AM
HI SEAN,
i set up the six carb tunes yesterday on the f6c valk, it worked out brillant! i also tuned up my honda x4, both are running like sowing machines now! im very pleased with these carbtunes, they are spot on!
thanks a bunch
nxxx
Nxxx Mxxxxxxx
From: <txxxx@xxxxx.com.au>
Sent: Saturday, April 18, 2009 10:30 AM
Dear Sean,
I'm very pleased to email and provide you with some feedback on the Carbtune which I bought in June last year but hadn't used as my bike had been tuned just prior to that. I balanced my carbs earlier today using the Carbtune and what can I say? The first word that comes to mind is "extraordinary". The accuracy of this product is remarkable as is it's ease of use, resulting in a very precisely balanced engine, testament of which was the immediate change in engine tone to a very pleasing to the ear sound.
Congratulation on an outstanding product!Please stay in touch and keep me informed of future products.
Kind Regards,
Txxxx Cxxx
From: <vxxxxxxx@charter.net>
Sent: Sunday, April 19, 2009 2:19 PM
I ussed my Carbtune today and was impressed with how well it worked. We used it on a Mercury outboard with four carbs and the results were amazing.
Thanks!
From: Bxxxxx Kxxxx
Sent: Wednesday, April 01, 2009 8:11 PM
Ordered on the Monday and I received my Carbtune on Friday 27th. Used it on my R1 on the Saturday. Easy piece of kit
to use and it has got rid of all the lumpiness I had on tickover. Would definately recommend Carbtune to anyone.
From: Rxxxx D Sxxxx
Sent: Sunday, March 29, 2009 11:39 PM
Hi Sean,
I finally got to use the carbtune this weekend, as the weather was great. The whole job on my 82 Yamaha XZ550
only took half an hour, and the bike starts, idles, accelerates, runs, and even sounds better than it ever has. I thought some of the rave comments must have been exaggerated, but no, this is without doubt the best sync tool I€™ve ever used. I€™ve used dial gauges, and plastic pipes with fluid in the past, even taken it to a factory trained mechanic and it has never run as well as this.
The tool itself appears to be a good quality plastic that should last for years, the hoses are flexible, and easy to push fit, and best of all the fluctuations are minimal enough to get good accurate balancing. It€™s easy enough to do before every major trip
without thinking twice about it. This is a piece of must-have kit for ever motorcyclist. I am very glad I spent the extra on a 4 gauge one, so I don€™t have to worry about ordering another if I get a 4 cylinder bike. I also recommend the case to anyone
buying.
Thanks for a great product
Rxxxx Sxxxx
From: "Rxxxx"
Sent: Thursday, March 26, 2009 7:03 PM
Hi Sean,
Received the Carbtune package today. Bought on 2009.03.19 received on 2009.03.26 here, in Lithuania. I've already tried the Carbtune and the 100 degree Screwdriver. I'm happy with both of them. Never realized that almost barely turned carb sync screw could make such a difference between the carbs... Now my bike runs as if I've lost 60 pounds of my weight :) Really superb and accurate product! Thanks!
Rxxxx R.
Lithuania
From: Oxxx Kxxxxx
Sent: Friday, March 06, 2009 12:11 PM
Hi
Just like to let You know how impressed I am regarding quick delivery of my Carbtune. Balanced the carbs on my two bikes last
evening,ZX11 and LTD 550. Must say it was very easy,never doing it before. Ended up all within 1cm, but was'nt too bad before either. But offcourse,I have only Your instrument to prove it is correct now,but they sounds right. Anyway,having two bikes done,means the purchase have allready paid off. Pretty sure I would have to pay at least NOK 500 (£50) each bike for a
similar job on a workshop. + I learnt something new.
Thks Oxxx
From: Cxxxx Dxxxxx
Sent: Thursday, February 19, 2009 11:10
AM
Hi sean
The Toolpouch arrived today (19th at 10:50.) must be a world record for delivery! Brilliant. Thank you for your excellent service
and superb product. 1st class Trader, wish there were more like yourselves Regards
Cxxxx.
From: Cxxxx Cxxxx
Sent: Sunday, January 25, 2009 8:38 PM
Dear Sean,
Thanks for the prompt delivery, which was seven days from the date of my order, to when I had the Carbtune sitting on my desk at work (here in Wellington New Zealand). That's extremely good delivery, considering we are as far away from you as you can possibly get on this planet. I'm also very impressed by the quality of the product, pouch and instructions; it was
a "piece of cake" to set up and to connect to my 1991 V75 Targa Moto Guzzi.
I was surprised how sensitive my bike€™s carb settings were and how far out the idle and initial throttle opening settings were. In the past, I had been a €œquarter turn€ type of tune up guy, but with the Carbtune fitted, it showed that an eighth to sixteenth turn of the idle screws and cable length adjusters could make all the difference.
I had previously thought that I had the bike running pretty well, and that the "thump" below 3500-4000 RPM was normal
for a Guzzi €“ the bike has never liked round town running and was always happiest on the open road, above 4000 RPM.
The bike is now running heaps smoother and will happily pull back to 2000 RPM (if I want), and the wee annoying flat
spot just on €œtake-off€ has gone too; the lovely exhaust note is now even nicer and I€™ve got a feeling the gearbox even seems quieter. This sounds silly, but it even "smells" better (the "running rich" smell has gone - when you pull up at the lights).
Thanks again.
Cheers €“ Cxxxx Cxxxx €“ Upper Hutt,
Wellington, New Zealand
From: "Hxxx, Txxx (UK Farnborough)"
Sent: Wednesday, January 21, 2009 7:46 AM
Hi,
I used the Carbtune last weekend to balance the twin Dellorto DHLAs on the crossflow engine in the Fisher Fury kit car I'm building. The car hasn't been on the road yet, & the carbs have an unknown history so the engine was EXTREMELY difficult to start & very lumpy at idle. After balancing, it now starts straight away on the choke & idles smoothly. The carbs are some way
off being set-up properly, but now it's running reliably I can make the other adjustments it needs. Because it's now drivable, the Carbtune has already paid for itself as I won't need to hire a trailer to take it to a rolling road for the final jetting set-up.
Excellent tool, thankyou.
Txxx Hxxx
From: "Jxxxx Mxxxxxxx"
Sent: Friday, January 16, 2009 4:30 PM
Gentlemen! Yesterday (evening 1-15-09) I recieved my Carbtune. It is BEAUTIFUL! I look forward to using it on this old Yamaha I recently bought. I've wanted one of these for years!
Thank you! Jxx Mxxxxxxx NC, USA
From: bxxxxxxxxxxx@xxx.com
Sent: Tuesday, December 09, 2008 5:04 PM
Subject: Very satisfied customer
EXCELLENT SHIPPING PROTOCOL!! Excellent wrapping, smart packaging (fit in MAIL BOX!). MOST PLEASED!!! And, of course, GREAT PRODUCT!
MANY THANKS!!!!
Bxxxx T. Cxxxxx,
Houston, Texas
From: txxxxxxxx@aol.com
Sent: Wednesday, December 03, 2008
12:55 AM
Just got it this morning (2 Dec 08), received in a week, very impressive delivery! Product works great!! Easy to use, love it!! Thanks!
Rxxxxx CA, USA
From: "Pxxxxx-Yxxx Lxxxxxx"
Sent: Wednesday, November 12, 2008 1:10 AM
Hi,
My order number was 1xxxx/021108/xx. I have ordered my Carbtune Pro with its Toolpouch on Sunday, November 2nd, and
received it on Monday, November 10th. It took 6 working days to reach province of Quebec in Canada. Thank you very much for your faultless service and shipping. I will definitely recommend your products to other people.
Sincerely,
Pxxxxx-Yxxx Lxxxxxx
From: "Jxx Gxxx"
Sent: Monday, November 10, 2008 5:52 PM
My order was received on 10/08/08. I followed all instructions the morning of 10/09/08 and found that my carbs were way out of sync. I used the Carbtune to balance them and the 26 year old Honda CB900 Custom runs like new.
I am very impressed with the product and your prompt delivery.
Thanks,
Jxx Gxxx, NC, USA
From: Cxxxx Dxxxxx
Sent: Wednesday, November 05, 2008 3:12 AM
Received my carbtune today in the mail. Just got done using it and was very impressed how easy it was to setup and use. also very impressed by the quality of this product. thank you very much.
Cxxxx Dxxxxx Kansas
From: axxx nxx
Sent: Monday, October 27, 2008 11:34 PM
Received Carbtune today, arrived in great condition. Followed your directions and the maintenance manual and had the carbs
(Goldwing GL1200) in sync within 30 minutes. (Takes longer to take the fairings off and on than the actual sync).
Thanks for a great product and service.
Mxxx
From: Axxx Wxxxxxxx
Sent: Friday, October 24, 2008 4:50 PM
Just wanted to let you know how much I enjoy getting a product that I feel is well worth the price charged. The CarbTune performs as promised & works flawlessly. I recently attended the 1ST Annual Steve Saunders GoldWing Motorcycle Rally in Calhoun. GA & took the Carbtune with me to show to other owners & to let the Carbtune works it€™s €œmagic€ on whoever wanted. I hooked up to 12 GL1100 & GL1200€™s & synched 10 of them (2 were so close I felt it would be foolish to adjust them). Alll who had the adjustments done were amazed at how easily the adjustments were made & how easy it was to read the levels. I know of at least one individual who said a Carbtune would be in his toolbox very soon. If I may, one recommendation/change? If 90 degree adapters were available then those with factory crash bars could do adjustments
without having to remove them. Thanks
Again, Andy.
From: Jxxx Mxxxxx
Sent: Wednesday, October 22, 2008 8:45
AM
Thanks for sending the carbtune. Thought I would report that it is easy to use and works very well. I have a bevel-drive 750 Ducati Sport and have always tuned the carbs by taking a spark plug out and tuning the idle mixture on the other carb and then trying to balance the two carbs after both have had the mixture set. This worked after a fashion, but I have to say that the carbtune is far better. Evidently one of the carbs was far too rich €“ the other was roughly correct. And when I came to balance them and get them opening together the carbtune made a big difference. The idle is far steadier, it will idle at lower revs, the pick-up from idle is much smoother, and throttle response is noticeably sharper. As I suspected I should have
done this many years ago. Happy to use this for endorsement purposes if you wish €“ I notice that you put such emails on your website.
Regards,
Jxxx Mxxxxx
From: Txxxx@aol.com
Sent: Tuesday, October 21, 2008 2:30 AM
Hi Sean, well It arrived today at 12:00 PM in good shape, did the queen wrap this package it looks and smells royalty. The product looks great, the first thing I did was strip the bike down for tuning and wormed her up, took it for a short ride and then started to tune her. I checked the sync with the new carbtune pro very impressive I must say and was off only a little was not
bad so I reset them and that was very ease and the started on the colortune, you were right I only needed one plug two is a pain. first time around I burned all my fingers, so Iv learned to leave off the periscope because it was easier to look right down on the plug.
Just like the instructions said. I started with the master carb I tuned the fuel mix rich which was yellow then back towards lean witch was Bunsen blue I very carefully continued till the flicker of yellow disappeared. did the same to the other three, I had one problem I had to use electrical tap and tap the joint were the lead attaches to the plug to stop the arcing, and also I found in my tool cheat a plumbers faucet wrench little over six inches and 16 mm full length which was great installing as well as removal and then went back and reset the sync and was done, that's it. Tomorrow I will take it for a test ride, just running it at idle and then opening the throttle it has a smooth response. This is very good. you know when I pulled the spark plugs out to do the colortune. The color on the plugs were like a gray white all four not bad by ear I must say. But in 5th gear it would lag when you opened the throttle. So we will see tomorrow how we did. All I can say is were in the hell have you been for the last twenty years, this was to ease. One hell of a produced I must say. Order was sent on Oct/15/08 twelve fifteen pm and received (Florida) on Oct/20/08 ten o'clock am.
best regards
Fxxx
PS you may use this if you like. In your testimonials.
From: "Bxx and Dxxxxxx Sxxxx"
Sent: Thursday, October 16, 2008 2:41 AM
Thanks for making such a great product. It is simple to hook up and use and the instructions are very straightforward. I put it to use today and WOW what a difference in the way the bike runs now. Had to fix the dealerships mistakes. Thanks again.
British Columbia
From: Dxx Lxxx
Sent: Friday, October 10, 2008 7:56 PM
Just completed setting mixture with the colortune and balancing carbs using the CarbTune. WOW! What a great difference!
The engine on the 1981 Suzuki GS1000G just purrrrrrrrs now. So..out for a test ride! I€™ll let you know how it went if you
like?
Dxx
From: "Kxxxx Sxxxxx"
Sent: Friday, October 03, 2008 3:59 PM
Rebuilt the carbs on a gl1000. Then synchronized with a mercury setup. We had a tough time with the mercury setup, could not get all four carbs in line. We used the carbtune and WOW what a difference, idles perfectly. Thanks for changing my order and the fast shipping too .
Kxxxx Sxxxxx
Sioux City, Iowa USA
From: Mxxx Kxxxxxxx
Sent: Friday, October 03, 2008 9:49 AM
Morning Sean,
The Carbtune I ordered back on the 22 of September arrived yesterday, October 2. Fantastic shipping time!! I must say how impressed I am with the carrying bag it came in. I have been a tradesman for many years and bought many different types of testing equipment and monitors and this kit bag is probably the most impressive I have ever received. I was at first hesitant
but now do not know why anyone would buy this tool without the case. Great shipping to New Mexico, USA!
Great communication! A product that does exactly what the retailer says it will!
Thanks for your time.
Mxxx K
From: Mxxxxxx Mxxxxxx
Sent: Saturday, September 13, 2008 11:45 PM
Sean
Hi, synchronized the carbs on my 03 honda shadow ace delux today. Wow, they were further off than I expected. The sync tool worked as expected and was very easy to set up and use. The bike runs much more smoothly and has more power.
Sure wish I had done this sooner, it was the first time the carbs had been sync'd.
Thanks again!!
Mxx
From: "Gxxxx"
<xxxxxxxx@optusnet.com.au>
Sent: Wednesday, August 20, 2008 6:14 AM
Sean,
Just letting you know that I received the carbtune in Australia on the 18/8/08 and immediately went to tune the carbs on my Yamaha R1. Everything went well ..... thanx for a great product and awesome delivery service.
Cheers,
Gxxxx
Melbourne
Australia
From: Jxxx Hxxxxxxxxx
Sent: Tuesday, August 19, 2008 2:57 PM
Wow. It arrived last night. That was extremely fast. Thank you. It performed perfectly. My '83 KZ1100 is purring like a kitten. Thanks for a great easy to use product.
From: "Vxx"
Sent: Tuesday, August 12, 2008 10:14 PM
Hi Sean-
Like you asked, I'm letting you know that I received my Carbtune Pro today, 8/12, just 8 days after I ordered it. I live in Colchester, Connecticut USA, so I would consider the shipping to be very timely, especially considering it often takes longer to get MC parts and tools within the states... It arrived in perfect condition and I immediately put it together and sync'd the carbs on my Vmax, which is a ten minute job. I bought it to replace a mercury type manometer which cracked during the winter--should have gone with yours from the beginning, but you know what they say about hindsight.
Thanks,
Vxx Cxxxx
From: Dxxxx Pxxxxxx
Sent: Tuesday, August 12, 2008 4:14 PM
Subject: Re: vincent
well!
what a difference with this new unit!, easy to read, very little pulsing with the dampers fitted, smaller and lighter, much more visible when hanging on the bars, no fear of shaking it or laying it down with the mercury spilling out, a real dream to use!, throw away the old type and get this one I say!
many thanks Sean
best regards
Dxxxx pxxxxxx
From: Gxxx Cxxxxx
Sent: Sunday, August 03, 2008 5:36 PM
Hi, Received the Carbtune yesterday, 8-2-08 in Pipestone, MN; It works great; my moto guzzi sounds / runs much better. Excellent tool; will have to consider gettting the ColorTune soon...
Thanks,
Gxxx Cxxxxx
From: Axxx Hxxxxxx
Sent: Sunday, July 20, 2008 11:08 PM
Hi
I would like to add my ha'penny's worth to your testimonials.
What an excellent piece of kit Carbtune is. I have recently bought a 1981 Honda CB900F which has done 70k miles and was distinctly unhappy. Having read the feedback on your site I decided to invest in a kit. After spending half an hour on a Sunday morning watching the stainless rods move up and down the tubes, I can't believe the difference in the bike
Previously it was a rough, growly, obnoxious old lump. But now, with carb No 3 having been reined back from the outer limits it powers on like a turbine. Smooth, responsive and together.
Thank you very much Morgan. I can't wait until it goes out of sync again :-)
Best regards
Axxx
From: Sxxxx Exxxx
Sent: Monday, July 14, 2008 3:19 PM
Hi Sean,
I also just wanted to let you know that your product works flawlessly. I synched my carbs with it yesterday and was extremely impressed with the quality of the tool. It is extremely sensitive without being unreadable (the rods react to tiny changes in vacuum, but they are well damped and easy to read while pulsating). The large diameter of the rods also contributes to the tools excellent readability. I'm very happy with it!
Thanks again,
Sxxxx Exxxx
From: "Wxxxxx"
Sent: Monday, July 14, 2008 11:42 AM
Day Sean,
Thank you very much, the carbtune has arrived safely. I used it on my bike yesterday and wow so simple to use and Accurate. My bike has never ran so well
Thank you
Wxxxxx Axxxxxxx
From: Mxxxxx Cxxxx
Sent: Friday, July 11, 2008 4:21 AM
Hey Guys,
I received my Morgan Carbtune Wednesday July 9th. Thats pretty quick and I must say I couldn't wait to open it. I used it this afternoon and was amazed at how easy it was to use and also what a difference it made in the way by Royal Star Midnight Venture runs. Its back to its old self again and running great!
Thanks for quick service and a great product!
From: Pxxxxxx Mxxxx
Sent: Wednesday, July 02, 2008 9:27 PM
hi i have received my carbtune pro, i ordered it on monday 30th june and it arrived today weds 2nd july only 2 days from ordering to it arriving at my door which is really fast! i used it today and my carbs on my yamaha yzf r6 were so far out i am shocked the bike was running at all! i found it really easy to set up and hook it up to my bike and it now runs and idles smooth and perfect. what a great product and fast delivery thanks.
mr p mxxxx UK
From: "Axxx F. Cxxxx"
Sent: Wednesday, June 11, 2008 7:20 PM
Hi Sean,
Finally got some weather decent enough to get my bike out (1973 BMW R75/5) and get a few miles on it before checking the carb tuning. Weather on the Canadian east coast can be quite chilly up until the middle of June, or beyond.
Wanted to let you know that the Carbtune worked great. I set the carbs up last fall using some gauges that an air mechanic neighbour had, but was never fully satisfied with them as I couldn't get them even (I tend to be a perfectionist). I had rebuilt the Bing CV carbs and redone the heads, cylinder barrels and new rings last summer, so perhaps the compression was a bit better after a few hundred more miles. On setting up the Carbtune I had about 16cmHg in the left and about 12 in the right. After doing my thing with the idle speed adjust and idle air/fuel mixture screws for both carbs, they nicely leveled out at 14cmHg. Interestingly, when they levelled out, the pulsations in the tubes smoothed out also. Still there but less. To be expected, I guess. I wasn't looking for any specific number as long as the two were even, so this worked out quite well.
Took the bike for a highway run and it felt great. Probably better than it ever has. Pulled the plugs when I got home and the colour
was excellent, that nice tan brown shade that we want. So, not running too rich or too lean and nicely in the groove. I'll run it for a while and check it again later in the summer (if it ever gets here :-) ).
Anyway, I wanted to drop you a line to let you know I am happy with the product. People are quick enough to complain when they're not happy with a product but never really seem to say anything when they are. Thought I'd let you know.
All the best.
Cheers,
Axxx Cxxxx
From: sxxxx
Sent: Sunday, June 08, 2008 12:18 AM
Hi to all at carbtune,
Just bought a 4 cylinder carbtune pro, I have always been dubious about miracle cures and claims but I have to take my hat off to you.
I have a 1985 450 Honda rebel (USA import) that has always been a pig to start and ran lumpy,
Carbs have been stripped and cleaned with new jets and the bike still ran lumpy, took to a reputable Honda dealer who supposedly set carbs up.
Bike still ran like a bag of nails, so decided to bite the bullet and do it myself. I had seen recommendations on other bike sites
And looked you up, Boy am i glad I did, Bought the carbtune and followed the instructions warmed up the bike and fitted 2 of the pipes started up the bike , What a surprise 22 on one cylinder and 34 on the other (so much for Honda dealers ), Adjusted the balancing screw and within 10 minutes had carbs balanced at 24 on both cylinders, I had to reduce tickover and now the bike starts first stab of the starter and sits idling away no problem, It is smoother all the way through the rev range,
Have sorted out 7 other bikes for friends and club members (2 and 4 cylinder) and all report smoother running and even better fuel economy,
Congratulations on a superb product, as they say €œIt does exactly what it says on the tin.€
A very happy customer (and in demand from friends who are to tight to buy there own carbtune).
Sxxxx Pxxxxxxx
From: Wxxxxxx Jxxxxx
Sent: Monday, June 02, 2008 9:32 PM
Recieved the order about five days ago. Time wise, ahead of your prediction by a couple of days. Used it. Works GREAT. Money well spent, Bike runs smooth as silk, and, has much more power all the way around.
Bxxx
From: "Hxxxxx Fxxxxxx"
Sent: Monday, June 02, 2008 4:07 PM
Sean,
I received my Carbtune Pro and case today. This may sound strange - but I am as impressed by the quality of the case as I am the Cartune Pro itself - GREAT JOB!
Thank you,
Hxxxxx
From: Bxxxxxxx Pxxxxxx
Sent: Thursday, May 22, 2008 9:05 PM
Hi Sean,
i have used my new carbtune. It works very fine. My engine is in best condition ever.
The cartune is the best tool I've ever had.
Thanks for it. Great Job.
Best regards
Bxxxxxxx Germany
From: "Mxxx Ixxx"
Sent: Saturday, May 10, 2008 11:28 AM
Hi, Carbtune arrived safely yesterday. So a day for delivery, not bad. (UK)
It took me longer to do the basic assembly than it did to balance the carbs! Worked superbly on my old XV1000. Despite it being a twin I still brought the 4 column version, makes more sense for a long term investment.
I was always a little concerned when working on the XV since it has to be sychronised at 1000rpm and 3000rpm and has open exhaust pipes, its hard not to disturb the neighbours! In all honesty once the tank was lifted to access the adjustment screw it took just seconds to balance both carbs at both settings. Its surprising how accurate the gauges are,just touching the screw moved the indicator by one minor graduation.
Unlike my old dial gauges there was very little fluttering from the rods, despite being attached to the handlebars of a big V twin and even when slowly opening the throttle.
So thanks for the great service and for answering my questions, only problem now is working out what to do with it for the next few months! BTW I would advise anyone who asks to buy the case, not sure why I didn't but it seems to make sense now that it lying around my garage.
Regards,
Mxxx
From: Rxxxxx Pxxxxxxx
Sent: Wednesday, May 07, 2008 8:49 PM
Just wanted to let you know,I orderd a Carbtune Pro and Colortune in the evening, on April 29, and received it on May 5, in Florida,in the U.S. I have never ordered anything and received it that fast in the U.S.,much less from another country.It would be nice if every one had shipping like that .It took me about 45 minutes to do the sync, and that's including the assembly of the restrictors into the hoses on the Carbtune.Thank You for making such a great product for the Do-It Yourselfer.Have
yet to use the Colortune, but expect the same great results,judging from the instructions.
Thanks again.
Rxxxxx Pxxxxxxx
Defuniak Springs,Fla.
From: "Gxxx Nxx"
Sent: Friday, April 25, 2008 5:51 PM
To Sean Morgan,
I received my carbtune yesterday and was eager to use it. I had read many testimonials on your site and on the web about the ease of use and accuracy the carbtune has. It is absolutely true and now my bike has been revived and is running great.
Thank you very, very much,
Gxxx
From: "Pxxx"
Sent: Thursday, April 24, 2008 8:08 AM
Hi Sean,
Just letting you know i received my order on Tuesday the 22nd of April.
Great product, my carbs are now perfectly in sync, far better than the one i could have purchased here in Australia.
Thanks again
Pxxx Wxxxxx
From: "T.Fxxxxx"
Sent: Tuesday, April 22, 2008 6:18 PM
Yes, no taxes are always a bonus. They get enough already!
By the way, great product, sync'd my carbs in minutes to within .5cmHG
variance.
Cheers,
Txxxxx Canada
From: "Rxxx Bxxxxx"
Sent: Saturday, April 19, 2008 12:12 AM
I received my Carbtune/Colortune on April 14, 2008. Really fast! Only 7 days to America. Worth every penny. Even at today's exchange rates. Huge difference in the performance of the bike. I'll tell all my friends. Many
thanks, Rxxx Bxxxxx.
From: "Gxxx, Pxx E. (EXPORT)"
Sent: Wednesday, April 16, 2008 12:46 PM
Hi, I received my Carbtune Friday (11 April), thanks for the quick delivery! Used it to set the idle and sync on my Commando (2 ea Amal Concentric MK1). Worked great and after I got the "off idle" sync perfect the throttle
response was better then ever before, the rear of the bike "sits" nicely blipping the throttle !!! Never had this great throttle response before :)
Cheer,
Pxx Sweden
From: "Mxxxxxx Cxxxx"
Sent: Thursday, April 03, 2008 2:16 AM
Hello Sean.
Wanted to let you know that last week I finally got a chance to use the Carbtune Pro on my 2005 Yamaha FJR 1300.
Set-up only took me about 15 minutes to read the instructions and cut the tubing to the recommended lengths and have it ready to go. The tie strap works great for hanging it from the handlebars.
I was able to connect the hoses directly to the throttle bodies since no adaptors were required. Once I turned on the bike it only was a matter of minutes before I had the adjustments made to specs. This is due to the ease of reading the gauge and the minor fluctuations in the tubes due to the excellent damping.
The bike was running really well so I did not expect the sync to be out of spec, but it was out quite a bit actually.
Now the throttle response is even smoother, quicker, and faster than before I did the sync. I haven't had a chance to go on a long ride to check the gas mileage difference yet, but hope to tomorrow.
I am very impressed with the gauge. I would recommend it to anyone.
Thanks again!!!!!
Mxxx
From: lxx cxxxxxxx
Sent: Monday, March 17, 2008 9:15 AM
hi morgan,
Thanks for the quick delivery off my carbitune used it on the weekend to tune my xl1000v it worked like a dream the bike is smoother and more responsive the balance was out y 20 cm hg with your tool i got both carbies exactly the same 30cm hg once again thankyou for the prompt delivery to australia.
regards rxxxxxx cxxxxxxx
From: Bxxxxxx Txxx
Sent: Sunday, March 09, 2008 6:22 PM
Hi, Sean
Now, that's some of the finest service I've had in a long time. I appreciate the effort and expense very much. I haven't found anything close. ...
Thanks again!
Dxxxxx
From: "Txx Cxxxxx"
Sent: Saturday, March 08, 2008 12:32 PM
Hi Sean,
I received notice of the kit last Tuesday, ...
So I have it (Carbtune), and used it with outstanding results. The Colortune will have to wait though as I have yet to get a DVSTS to fine-tune my FI.
Thanks and regards,
Txx
From: Bxxxx
Sent: Friday, March 07, 2008 1:24 PM
My order number is: 1xxxx/05xxxx/66
What can i say. "delighted" thats what i can say. Morgan your web page, order process, email's, are first class.i ordered on the 5th late at night. i recived an email conformation, the the following day the 7th your product arrived. You cannot get better than that. So a Big THANKS.....
I would recommend Morgan to my friends and family
From: Gxxx Mxxxxx
Sent: Thursday, March 06, 2008 10:01 PM
Synced the carbs today on my 05 FZ1 Yamaha. The carbtune worked great with hardly any fluctuation of the rods. It took a little while, and I went back over all the screws two or three times, but the bike runs better than it ever has now. It has always required for the throttle to be opened slightly to get it to start but now it starts with a touch of the button without any throttle and I can't find the little buzz that I felt in the tank around 4000 rpm's. You have made a wonderfull tool! Thanks, Gxxx Mxxxxx
From: "Txxxxx"
Sent: Wednesday, February 27, 2008 1:24 PM
Hi Sean,
I just balanced my Honda CB750 carbs using my new Carbtune, I have never completed such a task in so little time, I am amazed at how easy it was. Thanks for a well priced professional piece of kit.
In case you wanted to look here are before and after pictures, by all means use them and indeed this letter if you feel it would promote the Carbtune.
http://uktrash.org/honda/before.jpg
http://uktrash.org/honda/after.jpg
Txxxx
From: Dxxxx
Sent: Saturday, February 23, 2008 5:05 AM
Order No. 1xxxx/070208/xx
Order arrived Friday 15 th AM undamaged
I setup the carbs on my Suzuki Bandit the following weekend without any problems using cartune pro II I have found this to be an excellent and easy to use tool giving good results.
Thanks for your good service
Yours
Dxxxx.
From: "Rxxxxxxx"
Friday, February 22, 2008 2:33 PM
Sean,
You folks are the very best! Thank you for such a quick response. I can see how you have maintained such a great reputation for both service and product. I look forward to using the Carbtune very soon.
Gratefully,
Rxxxxx
From: "Cxxxx Dxxxxxxxx"
Sent: Thursday, February 21, 2008 2:19 PM
Hi Carbtune, just a note (sorry for the delay!) to say that my order (1xxxx/280108/xx) arrived on time and in perfect order.
I was inspired by the recent article by John Westlake in Bike magazine and although I am a relative novice at diy garage work I found the Carbtune Pro very easy to work with. ....
Thanks again,
Cxxxx Dxxxxxxxx.
From: ixxx
Sent: Thursday, February 14, 2008 5:44 PM
Hello I have tried my new carbtune and its perfect! My old Kawasaki 650 SR D3 runs like a "miracle" after adjustment with Carbtune Pro.Thanks a lot!!!!
Regards
Ixxx Mxxxxxxxx Norway.
From: "lxxxx" <kxxxxxxxx@comcast.net>
Sent: Tuesday, February 12, 2008 9:54 PM
I received the Carbtune in record time, less than one week to Pennsylvania. I used it the other day and the unit works better than any
other type I have used in the past-I was a motorcycle mechanic for 12 years. .... Thanks for the quick shipping, Lxxxx
From: Mxxxxxxxx@aol.com
Sent: Monday, February 11, 2008 2:55 PM
I just wanted to let you know how please I am with your product. I bought your carbtune with case in January. I have used gauges and mercury sticks but yours is the BEST!!! No fluctuating up and down and dancing gauges. Just smooth readouts that are easy to read and follow. Synch. was a snap. Thanks for a great product.
Nxxx Lxxxx
Maryland USA
From: "Jxxxx Bxxxxx"
Sent: Wednesday, January 23, 2008 3:43 AM
Hi Sean
Thanks for your quick reply as always, managed to get my card to work, my eyesight isn't what it used to be so I was trying to put in the wrong expiry date.Don't know if I emailed you before but the Carbtune I ordered before was the best 50 odd quid I have spent in a while, easy to use(easier than vacuum gauges), quick and makes a big difference to the bike. Have set up a few friends bike with it and they were impressed too so you might get a few more orders from Thailand.
Best regards
Jxx Bxxxxx
From: <bxxxxxx@ixxxxxxxx.on.net>
Sent: Saturday, January 19, 2008 4:27 AM
No Problem Sean,
Hope the info helps. Just want to let you know as well I used the Carbtune today on my XJ900S. This is an excellent
bit of gear....had the carbys adjusted in no time... if I need any other specialist tools I'll keep you guys in mind and let my friends with bikes etc know...
Thanks again
Cheers
Bxxxxx
13/1/08
I bought the CarbTune II kit off your website a few years ago. It has realy helped me do that last 10% fine tuning. Thanx to you I''m the ''Carburettor Hero'' among my biking friends ;-) Simply a fantastic product!
From: Exxxxxxx Bxxxxxxxxx
Sent: Tuesday, January 08, 2008 4:40 PM
Hi Sean, the last time my Suzuki was in a workshop to have the carbs syncronized it cost 2500swedish krona.
I paid less than 1000 swedish krona to buy a Carbtune and do the job myself with a better result, it is smoother than I have ever known it (ticks over like a clock) and I still have the tool.I am as you will have gathered, highly delighted, it is so easy to use once the adaptors are in place which on my bike are a bit fiddley.
Best regards
Dxxxxxx Bxxxxxxxxx
Ps. if you want to use this reference, do so.
From: Exxxxxxx Bxxxxxxxxx
Sent: Tuesday, January 08, 2008 4:40 PM
Hi Sean, the last time my Suzuki was in a workshop to have the carbs syncronized it cost 2500swedish krona. I paid less than 1000 swedish krona to buy a Carbtune and do the job myself with a better result, it is smoother than I have ever known it (ticks over like a clock) and I still have the tool .I am as you will have gathered, highly delighted, it is so easy to use once the adaptors are in place which on my bike are a bit fiddley.
Best regards
Dxxxxxx Bxxxxxxxxx Sweden
Ps. if you want to use this reference, do so.
From: "dxxx" <dxxxxxxxxx@optusnet.com.au>
Sent: Sunday, December 02, 2007 2:25 AM
Hi Guys,
Just a quick note to compliment you guys on an excellent product.
I purchased my 4 column Carbtune Pro on the 20 Sep 07 and it was delivered
to Australia within 6 days - very impressive service, unfortunately I didn't
get to use the gauges until this weekend (1 Dec 07).
I have to admit that your system is by far the easiest and most accurate
carb tuning system I have EVER used. I've tried mercury gauges which were
just plain rubbish, I've also tried several different brands of analog
gauges which were difficult to use accurately because the gauges themselves
were not identically calibrated and defied all attempts to calibrate
accurately.
Your Carbtune system works straight out of the box, it is VERY easy to use
and most importantly it is VERY accurate - excellent !!!!! I'm definitely
impressed.
Just took the 2000 Honda Varadero for a ride and the vibration that I hadn't
been able to tune out has all but finally disappeared.
Thanks again guys,
Regards
Rxx Txxxxx in Melbourne Australia
From: Wxxxxx Txxxxx
Sent: Saturday, November 24, 2007 8:53 AM
Dear Mr. Morgan, thank you for the prompt attention to my recent order for a Carbtune carburetor vacuum gauge set. The package arrived (in New Zealand) within a week of ordering and following your instructions I set the unit up with the restrictors as supplied. A straight forward process. The carry case is a worthwhile investment to keep the kit together and keep dust and contamination away when the device is not in use.
I used the Carbtune for the first time today on my Triumph T 150 V and the initial run confirmed variations in the manifold vacuum readings. With the necessary adjustments made and equalised readings obtained, a road test confirmed a much smoother running triple at road speed with a clean transition off small throttle openings. Likewise the cutoff during deceleration is now cleaner with no obvious over run. A great product, easy to use and well engineered. The one regret is that I did not purchase one a long time ago!
Regards,
Wxxxxx Txxxxx
Johnsonville
Wellington
New Zealand.
From: "Bxxxx Mxxxx"
Sent: Thursday, November 22, 2007 9:05 PM
Hello folks at Morgan Carbtune !
I was pleasantly surprised to see my Carbtune Pro arrive in only 4 days, all the way from the UK! I just used it this morning and it works like a champ! The columns are so steady. It works so much better than that other unmentionable brand I got rid of. Oh, and my bike is running smoother than ever now. Thank you for making such a great carburetor sync tool!
Cheers :)
Bxxxx
Union City, CA
USA
From: "Pxx Cxxxxxx"
Sent: Thursday, November 08, 2007 2:37 PM
Hi Sean, I am just letting you know as you requested, I received my carbtune, Order Number 1xxxx/051107/32 at 12:50am Thursday 08/11/07 in the good condition you despatched it in. I found it a pleasant change to buy from your website as the price quoted was the price I paid (no vat and P&P extra) like most companies charge making the total price more than 50%, as
stated in their advert. I would like to thank you for your good service,
Regards Pxxxxxx.
From: Cxxxx Nxxxxxx
Sent: Thursday, November 08, 2007 8:17 AM
Hi,
just thought I would let you know that I received my Carbtune and Toolpouch on October 30th 2007.
P.S. the Carbtune works perfect.I will tell others about your great product.
Thanks
From: pxxxxxxx
Sent: Wednesday, November 07, 2007 4:24 AM
Dear Sean,
Just to let you know the parcel has arrived on the 5th. That's what i call excellent service.
Thank you for that.
Regards,
Dxxxx Bxxxx
From: "Kxxx Zxxxxxxxx"
Sent: Saturday, November 03, 2007 6:25 AM
Hello Sean,
The package arrived today and the Colortune has to be the best product for getting the fuel mixture set properly that I've ever used on my R75/5! It was easy and 'dead' accurate, plus it only took about 5-mins (after the bike was properly warm-up, of course) to do the job -- I couldn't believe how far off my previous best efforts were! ...................
Cheers,
Kxxx Zxxxxxxxx
From: "Mxxxxxx Sxxxxxxxx" <Hxxxxxxx@socal.rr.com>
Sent: Tuesday, October 30, 2007 1:37 AM
Hello. Just letting you know that I received my Carbtune today, pretty quick
considering the distance. (California) Looks like I have something to do this weekend.
You didn't mention how very nice the storage case is. I'm already racking my
brain as to how to turn it into an onboard toolkit for my Bonnie. I was
expecting perhaps a plastic bag, what I received was much too nice for a
"storage case".
Thanks again,
Mxxx Sxxxxxxxx
From: rxxxxxxxxxxxx@aol.com
Sent: Sunday, September 30, 2007 9:08 PM
Hi sean morgan, Thank you very much, I have received my carbtune pro in just over one day of ordering it.That is unbelievable. Many thanks
Rxxxxxx Lxxxx.
From: Axx Exxxxxxxxxx
Sent: Friday, September 28, 2007 12:02 PM
Ordered a Carbtune Tuesday, received today, Friday 10.00 AM...72 hours to Spain!.
Have to say that the system, with its steel rods instead of mercury is so ingenious and robust, it makes you wonder why nobody's thought of it before!. .......
Many thanks
Asturias
Spain
From: Axxx
Sent: Friday, September 21, 2007 7:43 PM
Hi,
For your information, I received the Carbtune Pro last Tuesday 18th September. I must say how pleased I am with this instrument. My 1998 Kawasaki GPZ1100 has been laid up in the garage most of this summer, this is after I had it serviced by a local bike dealer. Since then it has been running extremely badly, frequently stalling at most junctions and erratic revs at low throttle, I actually gave up riding it until I saw your advert and decided to have a go at tuning it myself.
I am far from what one would call a bike mechanic and to be honest dreaded the though of using this tool, but after studying the manual for half an hour I took the plunge and got stuck in, the carbs were all well out of balance and with this instrument I had them all synchronised with 10 minutes, the process worked a dream and was simplicity itself to use. The bike is now back on the road and simply purrs on tickover, the bike is again a dream to ride, many thanks.
If a novice like myself can use this tool without problem then I am sure anybody else could do the same. In future I intend to do my own servicing.
Many thanks
Axxx Mxxxxxxx
From: "Gxxx Cxxxxx"
Sent: Tuesday, September 18, 2007 8:53 AM
Hi Sean
Many thanks for the great service, The carbtune arrived with me on the 12th
September 2007, I have balanced the carbs on my 1989 VFR 750 over the
weekend, this is the first time I have attempted this and it was so easy,
the carbtune works exactly as promised and it makes such a difference to the
way the bike runs (cylinder 2 and 3 were way out) The bike now pulls cleaner
from a standing start and low revs cruising (30mph limits etc) are much
smoother.
This was a great investment many thanks.
Regards
Gxxx Cxxxxx.
From: Bxxx
Sent: Monday, August 13, 2007 7:35 PM
Thanks guys the carbtune is here already, I was totally bloody flabergasted at your promt service , never seen the likes of it. If you order something here from a local Canadian co. or from the great USA !!!!!!! it usually takes 4 to 6 weeks.Have a great day. Bxxx
From: "Vxxxx Rxxx"
Sent: Thursday, July 05, 2007 9:59 AM
Hi Sean
I would like to thank you for the quick response and delivery of my order of
the Carbtune Pro and pouch.
I place the order over the internet on Saturday morning 23 June 2007 and
received it on Monday 2 July 2007.
That is excellent, from Belfast to Brisbane Australia in 5 working days...
From: "Sxxx Sxxxx"
Sent: Thursday, July 05, 2007 2:56 AM
Just an FYI
Have been using the "Carbtune" on V twins; TLR's and SV's mostly.
The damping is superb and the results are out standing, I'm sure you don't
need any testimonials but if you do Carbtune results speak for themselves.
Thank you again for a fine product.
MA, USA
From: Lxxxx Kxxxxx
Sent: Wednesday, June 27, 2007 6:14 AM
Sean,
I have a 2006 Honda 1000RR, that I recently picked :up. I could tell the bike was not running right and decided to use the carb tune, that I purchased awhile back for another bike,(04 Yamaha with carbs) after adjusting the throttle bodies, the bike ran like a champ... great product, easy to use.
thanks, Lxxxx, Hawaii
thanks for the fast service.
From: "Jxxx Mxxxxx"
Sent: Tuesday, June 26, 2007 4:32 AM
I just wanted to say that I received my order for a Carbtune Pro on 6/20/2007. It arrived about 10 days after I ordered it and I live in
Colorado, USA. It arrived in perfect condition and synching up my carbs was a breeze. I've been riding and working on motorcycles for 20+ years and this is one of the finest tuning instruments I have ever used. I couldn't
be more satisfied with my purchase from Morgan Carbtune Ltd.
Thanks for a great tool!
Jxxx Mxxxxx
Denver, CO USA
From: dxxxxxxxxx@optonline.net
Sent: Tuesday, June 26, 2007 2:19 AM
Sean,
Wow. You email said it shipped on Thursday 6/21 and I got it Monday 6/25. Thats 5 days to New York in the USA. I got home late frm work tonight and now its going to kill me to wait till tomorrow afternoon to tune the Dellortos on my 77 Lotus Esprit.
Thanks for the fast service.
Dxx Gxxxxxxxxx
PS feel free to use my correspondence.
From: SXXXX LXXXXXX
Sent: Wednesday, June 20, 2007 2:54 PM
Hello, I bought your Carbtune a while back but just got around to using it on my 2006 Yamaha FJR 1300. Your product is great. First I didn't need the adaptors on my Yamaha - the hoses just fit right on to the stubs. My bike was not much out of synch but, because the steel tubes on the Carbtune are so steady it was very easy to perform even minor adjustments. When finished all four cylinders were perfectly in synch. Total time including prep was less than 30 minutes. Last time I used the Motion Pro mercury based tuner. The mercury is much less stable in the tubes and I could not get nearly as close as with the Carbtune.
I will be using it on my 06 FJR, my wife's 05 FJR and my 03 Yamaha FZ1. Congratulations on a fine product that performs as advertised. It cost me less than one synch job at the dealer to buy your product.
SXXXX LXXXXXX
From: Jxxx Gxxxxxxx
Sent: Friday, June 15, 2007 1:56 PM
Greetings Sean,
You acknowledged my order number xxxxxx/060607/29 on 6 June 2007 and I received my Carbtune Pro-4 in the mail at 10:30 AM local time 13 June 07. (I live in the "Thumb" of Michigan, USA.)
I can't say enough good things about your Carbtune; I am very pleased. It was easy to set up and within 20 minutes out of the box I had it hooked up to my motorcycle and it performed flawlessly.
I recently acquired a previously owned 1998 Yamaha Vmax that came with carburetor problems. Carbtune indicated that carburetor number two (master carb €“ front left) had no vacuum at all. Carb number four (front right) was very high, almost off the chart. Carburetor numbers one (rear left) and number three (rear right) were somewhere in the middle. When I first saw that I felt that something must be wrong with the Carbtune. Well, number two carb wasn't showing anything and number four was almost off the chart; what else was I to think. It couldn't be the motorcycle; how could it run like that. Well it did run somehow but I knew it wasn't running according to its design parameters.
I must admit that at first I didn't think that the four Vmax carburetors could ever be brought into alignment. I am happy to report that Carbtune helped make it possible for me to accomplish the task! All four carburetors are within less than two cm of hg. It is a great product, a delight to use and does perform as advertised.
My Vmax doesn't just purr like a kitten now; it ROARS like a lion.
Best regards,
Jxxx
From: Dxxxxxx Bxxxx
Sent: Wednesday, June 06, 2007 6:42 PM
I recived my carbtune in the mail on MONDAY! WOW!
I ordered it on Thursday, and really wasnt expecting it for another 5-6 days.
Thanks Guys!
Now my bike runs smoother, cooler, and of course improved response and HP!......
Thanks,
Dxxxxxx Bxxxx Sacremento CA.
From: Rxx & Kxxxx Sxxxxxx
Sent: Wednesday, June 06, 2007 8:12 PM
Just a note to let you know Morgan that I received the Carbtune on Monday, and synchronized the carbs on my vmax today. Excellent piece of kit, extremely easy to use, all 3 carbs were out of sync with the master carb, after a few simple turns of the screw driver all were in sync with the master carb. Total time less than 15 minutes from start to finish. Well worth the money and more!
Thanks,
Rxx Txxxx
From: "Pxxx" <pxxxxxxxxxx@charter.net>
Sent: Tuesday, June 05, 2007 6:43 PM
I just wanted to tell you I'm really pleased with the Carbtune Pro. It came in only 5 days and it worked beautifully!! It took me about 3 hours to get my bike apart to the point where I could actually begin the
throttle body balancing, but the process only took 10 minutes!! The bike (ST1300) idles like it should, and has smoother throttle response at low rpm's and actually a decrease in engine temps!! The only downside is now all my biker friends want me to adjust their bikes!!
Thanks!
Pxxx Bxxxxx CA, USA
From: Jxx Txxxx
Sent: Friday, June 01, 2007 2:54 PM
Mr. Morgan, I received your product on May 30th. I am impressed with the tool and the case that I ordered with it. I ordered the Carbtune because I liked the idea of no mercury in the gauges and how simple this tool will help when working on my bike. Ordering the Carbtune online was simple and I received it within the time that your company said it would take. Very happy and look forward to purchasing other products in the future.
Thanks again,
Jxx Iowa
From: <bxxxxxxxxxxx@netscape.com>
Sent: Wednesday, May 16, 2007 10:59 PM
Hello Sean,
Just to let you know the carbtune pro arrived today. (Sent Fri 11th May. Arrived Wed 16th May California) It only took about ten minutes to read the instructions and set it up. It works perfectly, a wonderful product, I will tell my friends to get one or they can pay me.
Dxxx
From: "Bxx Bxxx"
Sent: Wednesday, May 16, 2007 10:49 PM
Hi,
I just finished sync the carbs on the 94 V Max, the bike was in the dealership for carb cleaning and sync, a few weeks ago but it didn't seem right somehow, but ran very good, it turns out 1 and 2 carbs were dead on and 3 and 4 were dead on but 3 and 4 were NOT in sync with 1 and 2 like ..
1 and 3/4 of a inch or so , I think the mechanic just had a two column meter instead of a four or just skipped the last step in the adjustments. The Carbtune Pro was just perfect and the fluctuations were very little it could not have performed better, a great tool I am more than happy with it and everything involved getting it. Your company is the real deal !, a role model for other companies.
Best Regards,
Rxxxxx A. Bxxx order number ... xxxxx/080507/38
From: Dxxx Wxxxxxx
Sent: Wednesday, May 16, 2007 9:15 PM
Hello Sean, Just wanted to drop you a line regarding my order #xxxxx/080507/75.
I recieved it today, Wednesday the 16th. It came well packaged and I am totally impressed with it even without using it yet.
I look forward to giving it a try on my 1983 Suzuki GS1100ED this weekend and am sure of the results I will get.
Thank you for an outstanding product and I will surely return for more tools in the future while bragging about it to my friends.
I know my friends on www.thegsresources.com love your products.
Thanks again.
Sincerely Dxxx Wxxxxxx, Maine, USA
From: Dxxxxx Bxxxxxxx
Sent: Tuesday, May 08, 2007 8:28 PM
I received it May 04.
Works very well, so easy to use, it's a joke. The bike runs so well , throtle response all the way. Thanks for such a good product
Dxxxxx.
From: Rxxxxx Dxxxxx
Sent: Friday, April 27, 2007 12:34 AM
Sean,
The Carbtune Pro works great. Set up was easy, synchronization was easy and the guage was dead on. Great instructions, great design. Shipping was just as you described. Took about 9 days to recv in the USA .. but well worth the wait. My 2005 Max has never run better or more smooth. I will really enjoy riding this summer. Thanks for designing an awesome tool for us Do-It-Yourselfers.
Rxxxxx Dxxxxx
2005 VMax
VMOA xxxx
From: "Dxx Txxxxxxxxxx"
Sent: Tuesday, April 24, 2007 2:05 PM
Hi,
Just letting you know that I received my Carbtune Pro yesterday. Only 5 days total to get it here, which is awesome! I already got my GS1000 carbs syched up in 30 minutes. Your product works so much better than those mercury sticks. I was borrowing a friends mercury unit, but
after a bunch of mercury got sucked through my engine, that was the last straw. They are way too dangerous. I like the compactness and quality of the Carbtune. The rubber hose setup is much better than the cheap vinyl tubing on other units. It doesn't melt and kink up near
the hot engine, which is what caused my before mentioned mercury disaster. Thanks again for a great product.
Dxx Txxxxxxxxxx
Minneapolis, MN
From: "j k" <jxxxx@hotmail.com>
Sent: Thursday, April 19, 2007 9:52 PM
Subject: Magic :)
Hi carbtune, Thought I'd just let you know that I'm very happy with your product and the speed of
your delivery. I am a member of a few motorcycle forums and will be more than happy to promote
your products.
Thanks again, Jxx Kxxxxx
From: Cxxxxxx Gxxxxxxx
Sent: Thursday, April 19, 2007 4:17 PM
Hey Sean,
I just wanted to let you know that my beautiful Carbtune Pro arrived quickly and in perfect
shape. I have been out of the country, lately, but finally had the opportunity to give it a try.
It is absolutely wonderful and so very easy to use. My bike runs better, now, than it ever has
since I've owned it. I highly recommend your great product and appreciate your fine customer
service!
Cxxxxxx Gxxxxxxx
From: Bxx Sxxxx
Sent: Tuesday, March 27, 2007 3:33 AM
Thanks Guys,
I received the carbtune today, only 7 days, and it€™s the easiest tool I have ever used
Thanks bxx, TN. USA
From: <bxxxxxxxxxx@gmx.de>
Sent: Wednesday, March 21, 2007 2:24 PM
Hello Sean
I received my carbtune today and I've tried it in my shop ... and I'm impressed! Very good
quality, works very fine!!!!
Thanks a lot
Best regards Mxxxxxx Germany
From: Pxxxx Txxxxxx
Sent: Wednesday, March 14, 2007 11:49 AM
Rotax 912ULS AviationEngine
Sean, Mate,
Thanks a tonne for your great gesture! I have recently used the unit to balance my Rotax 9
series Aviation Engine Carbies and it was designed for this!!! The Rotax 9 series has small
nipples under the carb body at the inlet manifold next to the idle mixture screw that the tubes
fit perfectly onto. Once fitted remove the balancing tube between each of the manifolds and lock
with Blue Tack or similar and bingo! The balancing takes a couple of minutes......I have also
plugged the Carbtune with the aviators around me and will be posting at our forums as I think
that it was custom made for our engines!!! It has worked perfectly and I have experienced
exceptional power increase on climb out. Postage is cheap and delivery times are great.
Regards
Pxxxx Australia
From: Sxxxxxx Txxxxx
Sent: Friday, February 23, 2007 5:21 PM
HI
recieved this morning,fantastic service and product (Forcefield Body Armour Back Protector) cant
praise you enough.Will recomend you to everyone I know. once again many thanks
mxxx
From: Rxxxxxx Axx
Sent: Wednesday, February 21, 2007 7:24 PM
Hi Sean, just to let you know that the Carbtune worked a treat on my Lotus +2S. After drilling
and tapping a 5mm hole for each cylinder in the inlet ducts, I set up the Webers in less than
half an hour. The engine had previously been set up by ear and the measurements from the Carbtune
showed how far out the carbs were using this method. Very impressed with the complete nstrument.
Best Regards
Rxxxxxx.
From: "Jxxxx Bxxxxx"
Sent: Friday, February 16, 2007 1:23 PM
Hi Sean
VERY quick delivery I wasn't expecting it quite so soon, usually takes a lot longer things to
arrive, if they arrive at all. 1 week from ordering it on the internet to my doorstep in
Thailand. (Sent Monday arrived Friday) Top marks, good product and easy to use.
Best regards
Jxx Bxxxxx
From: Dxxxxx Mxxxxxx
Sent: Tuesday, February 06, 2007 8:55 PM
Dear Sean,This letter is long overdue. Ease of operating carbtune II is praiseworthy. I approached
the job with the thought that I would try it a few times to get used to it. 20 minutes later all
four carbs on the ancient Yamaha were working in "sync". I have put 5000 miles on it since and am
going to tune it again while it sits idle during this cold spell. Many thanks for your fine
product. I am Respectfully yours, Dxxxxx Mxxxxxx
From: Dxxxx Wxxxxx
Sent: Saturday, February 03, 2007 4:59 PM
Hello, I just wanted to let you know that I'm very happy with the Carbtune tool. I used it
yesterday evening for the first time and I can't imagine anything else working this well... it
worked SUPER! Even after a complete multi. (4-carb.) overhaul, it made a simple job of getting
them all sync'd. again. I can't imagine anything else working this easily. It went so smoothly
that I kept thinking that I must be missing a step somewhere!!! FAST shipping also, 6 days to
Idaho which is faster than many orders from within the states! This is one tool that is worth
buying, money well spent...
Thanks again... D. Wxxxxx
From: Gxxx.Sxxxx@au.ey.com
Sent: Monday, January 22, 2007 4:50 AM
Hi Sean,
Thank you for your email.
I just wanted to let you know the Carbtune arrived and works great! It didn't take long to hook
up and the Carbs were balanced within a few minutes. Ive always believed in the saying "give a
man a fish and he'll eat for a day, but teach a man to fish and he'll eat forever". Same applies
to servicing a bike. ...
Thanks again.
Gxxx Australia
From: Kxxxxxxxxx@aol.com
Sent: Friday, January 19, 2007 12:33 PM
Subject: happy customer
just a quick thank you for the fast delivery of my carb tune (order number 8xxx/17010). the order
was placed late night on 17/01/07 and the post man was delivering at 10am on19/01/07,i find that
delivery time to be outstanding, THANK YOU
Kxxxx Pxxxxx
CAERPHILLY, SOUTH WALES
p.s. if you wish to use this e-mail in any of your advertisements feel free to do so.
From: Wxxxxx J. Vxxxxxx
Sent: Tuesday, January 16, 2007 1:54 AM
I just wanted to add my testimonial to the growing list. I've used the Mercury type
synchronizers for years but loaned it out to someone and never got it back. I liked the idea of
have one with no Mercury since I have small children around now so I spent the extra to get the
Carbtune. Although I.m in the US, I got my carbtune in just over a week and was like a kid with
a new toy. What an awesome tool. This thing looks like it should cost twice as much and is as
easy to use as it sounds. I ordered the case with it and I am very glad that I did. A very nice
case that protects the unit and keeps all the hoses and extras together in my toolbox. The guy
at the cycle shop wanted almost as much for them to synch my carbs one time. I have three bikes
so this would have gotten expensive over time. Thanks again for the awesome tool and I'll pass
on the good word to everyone I know.
W. Vxxxxxx
Prairieville, Louisiana
From: Dxxxx and Kxx nxxxxxxx
Sent: Saturday, December 16, 2006 8:43 AM
Hi Sean,
I'm happy to announce that the order arrived yesterday. Yippee. I can't thank you enough Sean.
Sadly many businesses would have told me "too bad Dave, your mistake, your problem!". It's a
pleasure dealing with someone as helpful as yourself and I'll certainly be telling every
motorcyclist I know... Best product and best service. 'You're the man' as they say.
Thankyou very much and a very Merry Christmas to you.
Kind regards, Dxxxx Nxxxxxxx
PS: Feel free to quote the above wherever and whenever you like. You deserve all the credit you
get.
From: Bxxxxxxx@aol.com
Sent: Monday, December 11, 2006 7:27 PM
Hi Sean,
I ordered a carb tune 4 kit from you on the 5/12/06. It arrived on the 8/12/06 and was
put to use straight away. This is a top notch piece of equipment, supplied with simple to use
instructions, it balanced the carbs on my triumph perfectly.
Many thanks.... sxxxx.
From: sxxxxx
Sent: Friday, December 08, 2006 4:49 PM
Sean,
I just wanted you to know that I received my Carbtune II in the mail yesterday. Thank you, and it
looks like the high quality instrument that I expected it would be. I expect I will have many
years of good service from it. Your service was great and it was a pleasure doing business with
you. I will be telling all my friends about my great experience with your company and not to
have any fears about ordering it from over-seas, as I did at first. Thanks for making this
quality product available to everyone and I can€™t wait to try it out!
Mxxx Sxxxx Madden, MS. (USA)
From: "Bxxxx Sxxxx"
Sent: Wednesday, November 01, 2006 3:12 AM
Hi Sean, just recieved the carbtune.....works great, amazing how far the carbs can be out of sync
in just 1500 kms. ( break in period ) again......your machine works flawlessly.
From: Txxxxx Family
Sent: Monday, October 23, 2006 10:41 PM
Subject: Tools worked their magic.
Hi Sean,
Just wanted to send you a note regarding the Carbtune and Colortune you sent me (they arrived
last week).
I finally got a chance to put the tools to use today, and all I can say is HOLY SMOKES!!! Both
the Carbtune and Colortune worked like magic! My bike (€™82 Yamaha XJ750J) is running better than
ever. Both the Carbtune and the Colortune were very easy to use, and I am DELIGHTED with how much
better the bike is running now.
I will be a Carbtune and Colortune zealot from now on, and will send any and every one I can your
way.
Best regards - and thanks,
Jxx Txxxxx
From: "Txxxxx Dx"
Sent: Monday, October 23, 2006 9:57 PM
Re: Bevel Screwdriver
Hi Sean :
I would like to notify you that I already received the Bevel Screw driver today. Just to let you
know about this. The tools is in good shape and I myself, very happy about your work regading to
this order. This special tools would help a lot for tunning up the mixture that I am having
trouble with.
Thanks a again for your help Sean.
Dx, Gxxxx
From: "Exxx & Lxxx"
Sent: Wednesday, October 18, 2006 7:01 AM
Morgan Carbtune,
I am happy to say that I recieved my order. And in short order hooked the colortune up and the
carbtune up to my FZR and got it back to a very nice smooth idle. Improved throtle response also
came along with that. Thanks so much, once I set the carbtune up and found the ports on the
intake, it hooked up very easily. I will definitely have more fun at the track day with a bike
that runs soooo much better than it was.
Thanks Again.
Exxx TX.
From: Bxxxx Txxxxxxxxx
Sent: Sunday, October 08, 2006 7:28 PM
Subject: guide for cbr 600 f3 in Greek
Hi
thanks for a great tool! Just made a simple guide in a greek forum. Maybe it will help some
fellow cbr owners.Thank you.
http://www.moto.gr/forums/showthread.php?s=f716acbfeda4aace53ecbdd1d14a3a6b&threadid=29379
From: "Zxxxxx Pxxxxxx" <zxxxxxxx@seznam.cz>
Sent: Sunday, October 08, 2006 7:55 AM
Hello Sean,
yesterday I have used new CarbtuneII for the first time. It's pleasure to work with it and tune
the bike ... really good product.
Zxxxxx Czech Rep
From: Wxxxxxxxxxxxx@aol.com
Sent: Saturday, October 07, 2006 9:15 PM
to whom it may concern,
i ordered the carbtune last saturday 9/30/06 and recieved it today 10/7/06, the following
saturday. i ordered it for outboards, and tried it out today. it worked wonderful. so glad i
found this product..... and it was in my price range too. thanks
From: "Pxxxxxx Mxxxxxxxx"
Sent: Saturday, September 30, 2006 4:30 AM
Sean
Tried out the Carbtune this morning, it works great. My carbs were WAY out, no wonder it was
running like a pig. I will recommend your product to my mates who are still messing around with
bits of tubing and water!
All the best
Pxxxxxx Mxxxxxxxx.
From: "Pxxxxxx Mxxxxxxxx"
Sent: Thursday, September 28, 2006 12:59 AM
Sean
phenomenal service mate! Ordered on friday, received in Sydney (Australia) the following
wednesday. All appears in order, I will be trying it out this weekend.
with thanks
Pxxxxxx Mxxxxxxxx.
From: "Rxxx Bxxxx"
Sent: Wednesday, September 20, 2006 10:12 AM
Hi Sean,
Just to let you know it's arrived, less that 24 hours from my order. (UK) Absolutely amazing,
thanks. Look forward to using it. Have used one of your earlier models, with the mercury in and
that was good but this one looks even more simple and the carrying case idea, top marks. May your
company continue to do well.
Best regards
Rxxx
From: "Mxxxxx Exxxxxxx"
Sent: Saturday, August 26, 2006 11:59 AM
Hello, just wanted to say that my Carbtune has arrived (4days to sweden). I am really amazed over
the quality of both the Carbtune and its Toolspouch, looks really professional. Balanced my XJ
600S Diversion (2000) earlier today, took about 30min.
Regards from Mxxxx in Sweden
From: MXXX WXXXXX
Sent: Sunday, August 27, 2006 8:25 PM
Hi
Just wanted to thank you for an excellent addition to my toolkit. I€™ve used a set of dial vacuum
gauges for ten years to balance carbs on my GS550 Suzuki, then on my current CBR1000F Honda. I
balanced the Honda€™s carbs only a week before my wife bought me a Carbtune as a present. I€™d seen
your site before, and have to own up to cribbing your idea of putting restrictors in the tubes to
aid damping, as wandering needles had always been a problem. The restrictors did help, and I got
the carbs balanced closer than I€™d been able to manage before. Then last weekend I tried my new
Carbtune, and found that despite my confidence in the previous job, two carbs were actually a
hole graduation (2cm Hg) out from the fixed carb€™s setting €“ Not much according to your
instructions, but unfortunately they differed in opposite directions! A few minutes later I had
them all easily and equally balanced. I found it best to adjust with the revs at between 1200 and
1500 - there was barely any flutter in the gauge at that point, just enough to make it clear
that it was working properly.
Job done, and the difference on the road is very clear, even on a naturally smooth old beast like
the Honda. Mid range is noticeably better, and so is fuel consumption. To put some stats on that,
I have since duplicated a quick-ish 120 mile ride I€™d did a few weeks earlier, and got over 47mpg
compared with the 42 I€™d got before. Think that proves something has happened. Using the Carbtune
was easy, and it worked brilliantly. Can€™t ask any more than that. Excellent to find something
that actually delivers what it advertises, and I have to say it is very well made. I look forward
to using my Carbtune for many years. It is hard to be a repeat customer for you when you make
something so well it will last for years, but I will try!
Many thanks and regards
MXXX WXXXXX
From: exxx.cxxxxxxxx@club-internet.fr
Sent: Wednesday, August 23, 2006 5:19 PM
je vous remercie pour votre professionalisme j'ai bien recu les appareils commander sur votre
site vous souhaitent bonne reception de ce mail et vous dit a tres bientot pour d'autres produit
de votre marque ,cordialement Mr Cxxxxxxxx exxx et vous souhaite une bonne continuation pour
votre entreprise tres efficace merci encore .
From: "Jxx Kxxxxxx"
Sent: Wednesday, August 23, 2006 4:40 AM
Hi Sean Morgan,
I was pleasantly suprised to find my CarbTune delivered today.Just one week after I ordered it. I
live in the Los Angeles area, so sometimes mail gets here more quickly. The CarbTune appears to
be in perfect order with all the parts, including the pouch.
.........
Thanks again for your prompt service. I was reluctant to order your product from the UK and
looked for a USA distributor, but the experience has been wonderful and fast.
Sincerely,
Jxx Kxxxxxx
From: Rxxxxxx Pxxxxx
Sent: Tuesday, August 22, 2006 8:55 PM
Sean,
Just to let you know that the 90 degree bevel screwdriver, which I ordered on Sunday afternoon,
arrived on the following Tuesday (today). Thank you for another very quick delivery. I have just
tried the tool on the pilot screws of my 600 Hornet, and can see that it allow me to adjust all
four carbs, although I will need to loosen the clutch cable bracket in order to get no. 4 carb.
Best wishes,
Rxxxxxx
From: "Jxxxx Mxxxxxxx"
Sent: Tuesday, August 22, 2006 1:07 AM
Hello, Just wanted to reply and say that I received my carbtune synchronizer today and that it is
a very accurate tool with easy to follow instructions. My bike was just in the shop and had the
carbs rebuilt and carbs synchronized and but it still didn't sound right to me, 30 minutes after
opening the carbtune box I have perfectly synchronized all the carbs on my bike. I have also
used mercury synchronizer's. And I have to say the carbtune is far superior to them.
Thanks You,
Jxxxx from Illinois
From: Axxxxxxxxx@aol.com
Sent: Monday, August 21, 2006 9:24 PM
Hi Sean,
today I received the Carbtune ! Thanks. I can honestly (and be asured I will) recomend you and
your perfect service to my friends.
Best regards,
Mxxxxxxx Germany
From: G Sxxxx
Sent: Friday, August 18, 2006 7:27 PM
Hi Guys
Just dropping you a note to say thanks for a real easy to use carbbalancing product.It really is a fantastic tool, good design with easyto use & comprehensive instruction booklet.Its a real joy to use.
It made a real difference to the running of the bike also getting anextra 7 MPG now.
From placing the order in the evening it only took 2 days to arrive.Brilliant service, thanks again & good luck with sales.
G. A. Sxxxx
From: "pxxx mxxxxx"
Sent: Saturday, August 19, 2006 6:21 PM
Dear Sean,
Thanks for the restricter tube.Used the carbtune this afternoon to setup my carbs-what a simple and effective tool!Wish I'd bought one yearsago. Can't wait for tomorrow,I'm going to have a go at her ladyship'sbike.Many,many thanks,
Bestwishes Pxxx Mxxxxx
From: Bxxxx Axxxxxxx
Sent: Sunday, August 13, 2006 5:18 AM
Subject: Tuning up the Rotax 912 in my Pulsar
I was surprised when the Carbtune arrived yesterday, only 7 days afterordering. (Sent 7th Aug arrived 12th Aug, New Zealand)
There is a standard mechanical process for setting up the carbsynchronisation on the Rotax 912 engine, but having done it a number oftimes I was still unable to get the engine operating smoothly from idlethrough mid range. I also had a healthy disregard for the advertisingclaims of some of these new fangled sync devices.
Well, I am a convert. The Carbtune II was easy to connect up,after adding a couple of short lengths of tubing to match the manifoldbalance tube fittings. I was surprised at the readings. Well off atidle, and even worse through mid throttle settings.
It took only a few iterations to get the idle balance and idle speedspot on, and a couple more quick adjustments of the cable tensioner toget the mid range right. The idle screw adjustment required was onlyabout 1/8 of a turn, and the cable fitting less than one full turn, butthe improvement was immediately obvious. I'm very happy with theresult, and agreeably surprised how much smoother the engine is.
A great product. It should be part of every Rotax owners' kit.
Regards,
Bxxxx Axxxxxxx
From: "Mxxx G Dxxxxx"
Sent: Thursday, August 10, 2006 8:40 PM
Mr. Morgan,
I ordered the Carbtune on Sunday August 6th (sent Monday 7th) andreceived it today, Thrusday August 10th. That was very, very fast foran over-seas order. The Carbtune works exceedingly well and theBonneville is running great again. Thank you very much.
Texas, USA
From: "Mxx Fxxxxxx"
Sent: Thursday, August 10, 2006 1:03 PM
Sean:
Carbtune arrived A-OK here in NZ in 8 days from ordering, so the
processes really work your end - bravo!
Also, having now used it on the K1100RS here, I can report it's thetool
for sorting out the throttle body sync on the Motronic EFI system...
both the bleed screws **and** the "dreaded" butterfly sync setscrews
(that BMW/Bosch say you're never supposed to touch on pain of buying a
whole new set of throttle bodies)... Since mine had already been
"touched" sometime in the past, the CarbTune was set onto that task
(idle & open throttle sync) and has got the K11 back to turbine
smoothness & power at all revs, opening or closing throttle.Damping was
OK, even at 1000rpm, and readings remained around 1/3rd of scale, so no
problems with operation; haven't even opened the adaptors, since the
vacuum take-offs fit the 5mm hose as-is.
Surprisingly, I think it's also quietened the gearbox clatter down too-
maybe the K-series design of a light clutch basket being the only
flywheel mass leaves it open to passing any per-cylinder torque
imbalances at low revs straight through to the gearbox (and at175000kms
my gearbox is loose enough already!!).
Again, thanks for the prompt service with an excellent tool... It's
already paid for itself about 10 times over - literally - by sortingout
the butterfly mis-syncing. It's definitely a keeper, like my Norbar
torque wrench (15yrs now).
Mxx Fxxxxxx
Christchurch NZ
From: "Sxxxx Axxxx"
Sent: Wednesday, August 09, 2006 12:23 AM
Hi Sean,
Very sorry for the delay in replying - no excuses, just me!
Got the Carbtune delivered very, very quickly.
I ordered it Monday evening (about 9pm) and it was delivered thefollowing Thursday. Possibly the fastest delivey I have had fromany online seller.
So on Sunday I thought I would have a 'play' with it.
Not expecting to be able to do much in the time I had available, I wasamazed how simple it was to use and how quick I was able to balance mycarbs.....less than 10 mins.
The engine now tickover smoothily and is much more 'sharper' whenpressing the 'load' pedal.
So just want to say THANK YOU !
A perfect product, very well made, super delivery and simpleinstructions.
Kind regards,
Sxxxx
From: Fxxxx Mxxxxxxx
Sent: Wednesday, August 02, 2006 8:08 PM
Hi Sean,
Thanks for the fast shipment of the carbtune. It arrived within a fewdays after ordering. The instructions with the carbtune a very clear.The tool itself is easy to use. It took me only a few minutes tosynchronise the carbs of my yamaha xz550 (never done this before). Ican feel the difference when riding the bike. I can see the differencefrom the temperature gauge, the engine runs much cooler.
Thanks again.
Fxxxx Mxxxxxxx
Netherlands
From: mxxxxxx.bxxxxx@comcast.net
Sent: Sunday, July 30, 2006 8:23 AM
I received your product on the 15th of july, and I wanted to say thatthe directions were very easy to understand and that the tuner workedlike a charm. Thanks,
Mxxx Bxxxxx
From: "Wxxx Rxxxxxxxxx"
Sent: Thursday, July 27, 2006 2:23 AM
Thanks Sean, It arrove in prefect condition and I put it on the bike assoon as I got home Monday. Now the K100 is smooth as can be! thisweekend I have to do Dxxx Lxxxxx's Norton!
Wxxx Rxxxxxxxxx
From: "Jxxx Hxxxxx"
Sent: Saturday, July 22, 2006 4:36 PM
To all the great people over there on the Emerald Isle at MorganCarbtune,I have just received my Carbtune II this morning after placingmy order yesterday, and i have to say the delivery was so fast i thinkit must have
been dropped off by Superman. The quality of this unit is trulyfantastic and the tool bag it came with is great. I look forward tosetting up the carbs on my zzr1100 as i have noticed a considerabledrop in performance and a very restless idle speed. The previoustestimonials left by all the other purchasers fills me confidence notonly in the balancer itself but also in the ease of use and the veryinformative instructions. A great price for an extremely useful product.
Thanks, Jxxx Hxxxxx.
Birmingham. England.
From: Mxxxxxx&Bxxxxx
Sent: Friday, July 14, 2006 7:05 PM
Thank you for a wonderful product. How often does one buy aproduct that performs exactly as advertised? The Carbtune IIperforms perfectly. I bought a 99 Honda Magna one year ago, myfirst motorcycle since 1979 (my how things have changed, the mirrorsare more than just a legal regulation, one can actually see thingsthrough them!). I realized my carbs needed attention and I reallywanted to be able bring my little hotrod up to snuff myself. Iwent on-line and studied up on the gauges available. Analoggauges need periodic calibration and column gauges require a store ofmercury to fill / replenish as needed, both situations I wanted toavoid. Then I found the Carbtune II. After studying themechanism I realized that this was the tool for me. I just usedthe Carbtune II yesterday, July 14, and I cannot express enough thesatisfaction in performing this task for the first time myself and atthe same time achieving such good results on my first attempt is indeeda credit to your product which of course includes the adaptors andinstructions that come with the Carbtune II. My bike startseasier, idles better, has more low end torque from idle and even runssmoother at speed (The Honda v4 is inherently very smooth anywaybut to feel the motor actually improve is amazing). I intend tobuy your carb adjusting tool before my next carb sync so as make thejob go quicker (1/4 inch extensions with a universal and 7mm socketwork but not well) and (of course a Carbtune II ball cap if available).
Thank you again for such a wonderful product.
Rxxx S. Rxxxx
Manns Harbor NC
From: jxx
Sent: Friday, July 14, 2006 10:46 AM
dear sir (or miss), on 10-7-2006 i placed an order for the carbtune-2(order number;6xxx/100706/78) , on 13-7-2006 i received the unit ,which is within 3 days ,this is the quickest delivery i have everencountered , after buying something on the internet from a foreigncountry , thank you very much for this quick handling !!!
all the best to you ,
jxx rxxxx from the Netherlands.
From: Txxxxxxxxxxxx
Sent: Thursday, July 13, 2006 11:27 PM
I ordered a Carbtune from you last month and was amazed when it arrivedin less than a week - from Belfast to Texas! Although my emailsignature references my vintage bikes I purchased the tool for myBandit 1200 and Yamaha FZ1 (Fazer). I set everything up in tenminutes, and after pulling the gas tank, spent no more than another tenminutes balancing the carbs on the Bandit. What adifference! It doesn't even sound the same, the "lope" I thoughtwas normal - wasn't. The Carbtune is worth everypenny/pence. I will spread the word, thanks for a great tool.
Vintage Bikes, Vintage Rider
From: Cxxxx Wxxx
Sent: Thursday, July 13, 2006 1:12 AM
Sean,
I received my Carbtune thisafternoon. Within 1 hour from opening the package I had the 4 carbs onmy Kawasaki synchronized. The Carbtune worked flawlessly. I found thebike was actually running on 2 & 1/2 cylinders. WOW what adifference after tuning! The bike runs much smoother and accelerates asnew. Thanks for a great product!!!
Cxxxx W. (Connecticut)
From: bxxx sxxxxx
Sent: Friday, June 16, 2006 8:50 PM
Hi,
Sorry I have not been able to reply to you sooner. But I just wanted tolet you know when I received my order. I received it the next day onTuesday 13th June 2006 !! Do you employ the USS Enterprise to deliveryour shipments because I have never received any bike part that quick?
I couldn't wait until the weekend to balance my carbs (impatient as Iam) so I hooked up the Carbtune on Wednesday evening. My god, whydidn't I buy one of these years ago? It's so simple to use. My carbswere way out but after the balancing it idles smoother and acceleratesmuch harder. The vibes at cruising speeds have dramatically reduced too.
Thanks for a wonderful product, even the tool pouch is top notch. I'llcertainly be recommending you to the other lads in the bike club.
Feel free to use the contents of my email as a glowing recommendationof such a fabulous product.
Thanks again,
-Sxx-
From: <axxxx.xxxxx@xxxxxx.no>
Sent: Monday, June 12, 2006 12:42 PM
I got the carbtune by post 10.06.06. Exelent !
Saturday evening my bikes run better then ever.(Yamaha Maxim X)
Med vennlig hilsen/Best regards
for Norsk Scania AS
Axxxx Txxxx
From: Uxxxxxxx@aol.com
Sent: Saturday, June 10, 2006 2:30 PM
Hi Sean
Just wanted to say thanks for the fast service from the UK, thecarbtune II worked great, and tuning the throttle body's on my YamahaR6 was so easy. Runs nice now.
Gxxxx Sxxxx
California.
From: Mxxx Mx
Sent: Wednesday, June 07, 2006 1:57 PM
Subject: Nothing but praise
Just wanted to say….wow!!
Never imagined it would be so easy to do.
Don’t even have to pre-calibrate.
The before & after, after tuning is like night & day.TheCarbtune paid itself back in just one calibration.
Thanks
Mxxx "Mx" Bxxxxxx
From: "Cxxxxxx Cxxxxxxx"
Sent: Tuesday, June 06, 2006 2:04 PM
Hi Sean,
just a quick note of thanks. I recieved my Carbtune on Monday (5thJune) after ordering it Monday night last week (29th May) (4-5 workingdays). It did everything you calimed it would, was simple to use andeasy to read.
Thanks for an excellent product and an exceptional turnaround time. Ittook no longer than a package i had sent from interstate (in the samecountry).
Regards
Dxxxx
From: RXX
Sent: Sunday, June 04, 2006 1:08 AM
I just wanted to say thank you for the promt shipment of your productand it works wonderful I could not belive how simplt it is to use andwhat a difference it made in how my bike runs.
Thank you
RXX DXXXX
From: ZXXXXXXX@aol.com
Sent: Saturday, June 03, 2006 8:29 PM
Hi Sean Morgan, Thanks for the promt service of my carbtune wellpleased with it. Just thought to drop you a line to say how good ithought the service. Once again thanks J Mace
From: "The FXXXXXX"
Sent: Saturday, June 03, 2006 2:31 AM
Hello again, I received my Carbtune on June 1 for an order that wasplaced on May 24. This is extremely good service and the shippingtime was 8 days, quicker than items I have received from the US. I live in Canada. I have already used the Carbtune and it workswonderfully. My bike is 20 years old and this is the first timeit has been tuned up at 40,000 KMS. The carbs were obviously outof sync, which I now know, and the engine was running rough at idlewith a loping hiccup. It now idles smoothly and runs like the
day I rode it off the showroom floor. It is a 1986 Yamaha FazerFZX750.
Had I known how easy it was to adjust I would have ordered one long ago.
Thank you very much for everything!
From: Sxxxxxx Hxxxxxx
Sent: Thursday, June 01, 2006 6:07 PM
Sean,
You are an absolute star, what exemplary customer service.
Not only did I get a prompt reply to my enquiry but the pieces ofpiping arrived the next morning after requesting them which enabled meto do the job today (my last day off for the next 8 days).
It's a pity not everyone provides such a level of service, it would putthe Great back in Britain.
The throttle bodies were miles out too so I'm looking forward to takingit out on the road now that they are properly balanced.
Many thanks once again, Sxxxx.
If you have a customer testimonial page please feel free to use thisletter.
From: "Pxx Axxx Fxxxxxxx"
Sent: Thursday, June 01, 2006 9:09 PM
Sean,
I am very impressed with your delivery time!
Ordered the colortune the 29th and received the package in my mailboxjune 1. (Sweden)
I've already tested it and it works perfect as my previous purchase thecarbtune equipment also did!
It's a pleasure making business with you,
Thanks
Pxx Axxx, Sweden
From: Vxxxx
Sent: Wednesday, May 31, 2006 5:07 AM
Wow thats incredible speed. I ordered on a Thursday, item sent toAUSTRALIA on the Friday and got safetly at my house in MelbourneAustralia on the Tuesday.
Ive never had delivery of anything so fast let alone from UK toAustralia.
Kudos to you guys, havent tried it yet but I am sure it will do the jobwell.
A pleasure to do business with you
Vxxxx
From: Gxxxxx Exxxx
Sent: Tuesday, May 30, 2006 4:14 AM
Sean,
....Got the bike sync'ed this weekend and BOY WHAT A difference !!!! Nomore popping at idle, smooth from the go and I am sure as hell that sheis pulling much better !!!!
Just need to get the colour tune on her an see how she is on the mix.That will be in the next month or 2 as we are moving soon.
Once again Thanks for a great product. I feel much happier with thisthat with Mercury around two little ones.
I will recomend, and have in fact , your product. I will even try toget shops here to stock it !!!
Gxxxxx Exxxx Canada
One happy rider.
From: "Cxxxx Jxxxx"
Sent: Thursday, May 25, 2006 10:01 PM
Just a quick note to say thank you very much for the super fastdelivery of my Carbtune II.
I don't claim to have much of a techincal ability, but found the wholething very simple to do and most of all, it's effective!
The bike is running like a dream.
Thanks again
Cxxxx Jxxxx
From: "Jxxxx Bxxxxxx"
Sent: Sunday, May 21, 2006 1:37 PM
Sean,
Received the Carbtune Thu 17 May. Quicker than expected. Great product,
used it to set up the Starter Valves on my VFR Vtech perfectly.
Thanks.
P Bxxxxxx
From: "jxxx sxxxx"
Sent: Saturday, May 20, 2006 12:38 PM
All at Morgan,
Recieved order on Wednesday 17 May (carbtune), many thanks for yourprompt
service.
Balanced carbs' on the old CB650 friday using the Carbtune, it nowpurrs like a kitten: will now even pull in top gear from tickover,uphill!
Absolutely fantastic one of the best tool purchases that I've ever made.
(you can quote me on that)
Cheers
Cxxxx Txxx.
From: "Dxxxx Pxxxxx"
Sent: Friday, May 19, 2006 7:35 AM
Hi Sean
I received my order today (Friday 19/05/2006) in New Zealand. ...posted on the 15/05, it was very fast.
Regards
Dxxxx
From: Wxxxx Mxxxxx
Sent: Wednesday, May 17, 2006 7:56 AM
Hi Morgan.
I received the parcel with the carbtune this Monday, so the deliverytime was only 5 days included the weekend.
I have used the carbtune on my BMW R1100S now, and it works superb. Thebike really needed this tuning, and works much better now.
Many thanks from Mxxxxx in Sweden
From: Jxxx Pxxxxx
Sent: Monday, May 15, 2006 1:35 PM
I received my Carbtune ll Tuesday last week, less than a week fromordering – excellent service and I could hardly wait to try it out.
Although I am a first timer at doing this, I found the unit easy to setup. My Kawasaki ZX9 R certainly needed the tune up and once I hadconnected it up it was very quick and simple to use. My bike runs somuch better now. ...........
Many thanks for such an excellent product
Jxxx Pxxxxx
From: "Sxxxxx Bxxxxx"
Sent: Tuesday, May 09, 2006 2:33 AM
Hello Sean,
The Carbtune arrived in my mailbox today.
Everything looks great, and I can hardly wait to use it this weekend.
Thanks for having such a great product at such a reasonable price, with
super fast shipping.
From: "Axxx Sxxxxxxx"
Sent: Monday, May 08, 2006 1:48 PM
Hi Sean,
I would just like to inform you that I have received the package coupleof minutes ago.
Excellent service, way to go!
Keep up the good work
Best regards,
Axxx Croatia
From: Jxxxxx Mxxxx
Sent: Friday, May 05, 2006 9:17 PM
Hi Just like to say thanks for what I would call an outstanding productand service at extremely good value.
Instructions are excellent, easy to understand and clear.
It worked a dream on my 1200CC Suzuki Bandit.
Regards Jxxxxx Mxxxx
From: Wxxxxxx Pxxxxxx
Sent: Sunday, May 07, 2006 12:38 AM
Thanks for superb service. Ordered my Carbtune and Carbtool lateon Bank Holiday Monday and received it first post Wednesday. Soeasy to use, even a mechanical numpty like me was able to sync up myCX500 carbs this morning. ...
From: gxxxxx g
Sent: Friday, May 05, 2006 1:52 AM
Hello, I received my order a while back and just in time to synchronizethe carburetors on my 05 Suzuki GSF1200 after a carburetor kitinstallation which included an intake and exhaust change as well. Ialmost never send this kind of e-mail as most products seem to workmarginally well and others are sometimes ineffective. In all my 35years of riding 4 cylinder motorcycles I never used a product forsynchronizing carburetors that worked as well and as easily as theCarbtune. Nothing I have tried works better and simpler, the Cartune issimply an excellent and effective tool at an excellent price. Thank youfor putting so much care into a production product, it truly shows.
Very Respectfully E. Gxxxxx, AZ, USA
From: "Pxx Axxx Fxxxxxxx"
Sent: Monday, May 01, 2006 2:01 PM
Tested the Carbtune today that I purchased in january. I used it on myoldie the GL1000 1975.
Must say that it was very easy to hook up and the readings were steadyas a rock.
Took me only a few minutes to adjust the carbs.
Great value, thanks
Pxx Axxx
Sweden
From: Txxxxxxx@aol.com
Sent: Friday, April 28, 2006 8:17 PM
Hi,
just writing to say how pleased i am with the carbtune 2.I ordered it online on saturday the 15th of April (Easter Saturday),and received my wonderful parcel to my amazement the next Saturday(amin Germany). Have now used carbtune 2 on my 16 year old GSX600F and amreally pleased with the results. It is so easy to use, and i wouldrecommend it to everyone. After setting it up i was finished in about 5minutes, with tank removal and setup about 30 minutes altogether.Brilliant tool, fast delivery - 10 out of 10 from me. Thanks a lot.
Yours Faithfully
Rxx Txxxxx
Germany
From: Sxxxx Sxxxxxx
Sent: Saturday, April 29, 2006 2:05 AM
Cheers for the reply Sean, I got a couple of T pieces today and thefeedback was only by way of a helpful response to you. I wish everycompany I deal with was as customer orientated as you are.
Cheers
From: "Dxx Lxxxxxx"
Sent: Wednesday, April 26, 2006 7:04 AM
Subject: Re: Your Order at Morgan Carbtune Ltd
I just received the Carbtune II today in the mail, 4/25/06. Isycronized both Hondas. The Nighthawk was way off. The idlebecame smoother when adjusted. Thanks for an excellent product.
Dxx Lxxxxxx
Wellington FL USA
From: Rxxxxxxx Gxxxx
Sent: Tuesday, April 25, 2006 8:18 PM
My Order Number is: 5xxx/190406/xx .....bought 4-19-2006 ....receivedtoday 4-25-2006.
WOW......6 DAYS.....FAST!!!!! (From you to Corning New York U.S.A)
I'll email you and let you know how it works for me....(I'm sure I'llbe 1000% satisfied!)
Rxxxx Gxxxx
From: Rxxxxxxx Gxxxx
Sent: Wednesday, April 26, 2006 1:17 AM
AWESOME....TOTALLY AWESOME!
My carbs were WAY out of sync.......took me a while longer than itshould have but that was because of how far off mine were.
This tool is a MUST HAVE for ANY rider!
WELL WORTH the money!
You may print my testimonial.
You guys saved me HUGE $$$$$
Thanks again.
Rxxxx
From: Jxxxx Gxxxx
Sent: Monday, April 24, 2006 9:54 PM
Dear Mr. Morgan!
I recived my Carbtune II on 18th of april(ordered 07.04) Thank you foryour fast delivery...
i tried it today on my gpx600 and it is a great tool!
Best regards;
Jxxxx Gxxxx
Croatia
From: "Jxxxx Rxxxxxxxx"
Sent: Friday, April 21, 2006 4:36 PM
Dear Sean Morgan,
You asked to information about the time I have received my order. I gotthe Carbtune II this morning in mint condition, right into my mail box!Really convenient deal, I would say :)
I made the order (5520/180406/19) from your website on Tuesday morning.(Sent Wednesday, arrived Finland Friday.)
Thank you very much for the prompt delivery.
With best regards,
Jxxxx Rxxxxxxxx Finland
From: Kxxxx Wxxxxx
Sent: Friday, April 21, 2006 1:06 PM
...........The Carbtune is far superior to the gauges I've used foryears. The set up is extremely quick to install and set up. From ridingmy '93 Daytona for a warm up to having the tank remotely connected, andthe Carbtune connected, 10 minutes had passed. The engine still warmand ready to tune. The method of damping is so simple, but veryeffective. When damped carefully,the slightest variations were easilydetectable, making balancing very accurate. Then the ColourTune plugsare installed ready to set the mixtures.
After resetting the mixtures on the air screw and a change in needleposition the Carbtune was again used for final fine adjusting.
The test ride revealed a new machine. Beautifully smooth off idlethrottle and very responsive throttle. The exhaust note was muchcrisper and with smoother tone.
After 20 plus years of tuning by 'ear', I will never again set mixtureratio screws without a colourtune plug.
After setting with the Colourtune plugs, I reinstalled the normalplugs, wound in all 3 mixture screws without counting the turns. I thenset them all to 2 1/2 turns out. Restarted the bike,setting eachcylinder with all 3 cylinders firing, then finally checked the settingwith only one cylinder running at a time.
I then reinstalled the Colourtune plugs and checked the flame colours.I was close on 2 carbs, and almost a 1/4 turn rich on the other.
While doing these adjustments, I was using the 90 degree screwdriver Iordered from you. This is an accurately,well made,keenly priced pieceof tuning equipment which has earned its place in my 'special tools'cabinet.
I've been very impressed with your tools and your service Sean, you arewelcome to extract and use as testimonial anything I have written above.
Your fast replies from enquiry to delivery and the speed of yourshipping is excellent. Your customer service is top notch andappreciated.
NZ.
From: "Pxxx Hxxxxxx"
Sent: Friday, April 21, 2006 12:47 PM
Hi Morgan, please feel free to add my comments to your websitetestimonial.
Carbtune a great device well worth investing in!
Simply wonderful, that is how my Lotus/Ford engine now runs in myElan+2.
I also set up the carbs on my sons Bandit GSF600 which also had a majorimpact on smoothness and power delivery.
Should've bought one years ago!!
Pxxx Hxxxxxx (Club Lotus Member xxxx)
From: Jxx Sxxxx
Sent: Wednesday, April 19, 2006 12:31 AM
Dear Morgan Carbtune,
I wanted to let you know I received my order today. Everythingappears to be in order. I must say I am greatly impressed withthe level of service so far. To have my order go from GreatBritain to the Great State of Texas in less than four business days isvery impressive. (Sent Good Friday 14th, arrived Tuesday 18th)
Sincerely,
Jxx Sxxxx
From: Jxx Dxxxxxx
Sent: Friday, April 14, 2006 12:34 AM
Sir,
I purchased a Morgan Carbtune II from you a few months ago and finallyused it for the first time today on my 2005 Yamaha FJR 1300. Yousir have indeed built a better mouse trap!
The Carbtune II worked beautifully. The toughest part of theentire process was removing the Yamaha securing clips on the rubbercaps on the brass attachment points on my bike. Once that was done itwas smooth sailing. I labeled each of the Carbtune II hoses andthe Carbtune II gauge to avoid any confusion during the adjustmentprocess. Your case is also excellent and does a nice job of bothorganizing and protecting the Carbtune II.
I've attached some before and after photos to show you what I foundprior to the adjustment and how close I was able to get the finaladjustment using your Carbtune II. My bike has only 2,400 mileson it, and you can see by my photos just how far out of adjustment Ifound it. I suspect it was never "fine-tuned" prior to delivery.
I used the fjrtech.com web site below as a reference which was veryhelpful during the process.
http://www.fjrtech.com/getdbitem.cfm?item=21
Thanks for your great product!
Best Regards,
Jxx Dxxxxxx NH, USA
From: "dxxxxxxx"
Sent: Tuesday, April 11, 2006 9:23 AM
Dear Sir,
I bet you thought I was going to complain, well I have nothing butpraise for your excellent prompt service and great Carbtune product. Sosimple to
use with great instructions, Website is great too including thecurrency converter. Keep up the good work. Your product was ordered8-30pm Monday and arrived in Australia- Saturday morning 8-00am.
Many thanks,
Dxxx Bxxxxxx. Queensland, Australia.
From: Jxxx
Sent: Friday, April 07, 2006 3:15 AM
Sean,
I received the Carbtune II kit in the mail today!!!
To give you a bit of history about why I bought this Carbtune IIkit... Just last year I bought a Mxxxxx Pxx carb sync tool tosynchronize the throttle bodies on my 2005 Honda VFR, but last weekwhile performing a Spring-Time tune-up I noticed the tool had aninternal vacuum leak where one of the plastic tubes mounts into thebase of the Mxxxxx Pxx unit. I was pretty mad because I had spentabout $90.00 for it, but I wasn't about to repeat history and that iswhy I instead bought a Carbtune II kit.
I'm sure you already know that your product is far superior than theMxxxxx Pxx kit, and when I hooked it up to my motorcycle this evening Iwas surprised to find that my throttle bodies were still slightly outof sync even though I had synchronized them six months ago using theMxxxxx Pxx kit. Now they are perfectly synced (and I meanperfectly even across all four bars), and I can honestly feel asignificant difference in the throttle response--the response is a lotmore crisp after using the Carbtune II. At any rate, I'm sure youalready know that the Carbtune is the best carb tuning product, but Iwanted you to know I'm definitely impressed with the design andquality, and I will recommend it to all my friends. .......
Thanks!
Jxxx Sxxxxxx
From: <sxxxxx@mxxxxx.com>
Sent: Monday, April 03, 2006 7:09 PM
I received the tool at the end of the week last week. That wasincredibly fast, I think it was 4 working days. (Sent Tue 28th. ArrivedFri 31st) Thanks for the great service. I used the tool last night andfound my carbs were way out of synch, I adjusted them and the motorsounds better. I can't wait to get it on the track. We
run a Legends car....
Thanks again, great tool, great service.
Sxxxx Mxxxx
Crystal Lake, IL.
From: "dxx p kxxxxxx"
Sent: Saturday, April 01, 2006 4:18 AM
What a great product. It took me about an hour of setting it up,tweaking it in, and riding away with a smile. Now my '73 CB350Fruns as good as it looks. I was really amazed at how smooth theengine runs now.... the mirrors never blur-out any rpm... what animprovement.
WA, USA.
From: "wxxxxx hxxxxx"
Sent: Monday, April 03, 2006 8:32 AM
Hi Sean
My carbtune arrived on tues 28th march. Balanced my carbs on Friday,very easy to use, top roduct.
Many thanks
Wxx Hxxxxx
From: <gxxxxx@xxx.com.au>
Sent: Tuesday, March 28, 2006 1:51 AM
order arrived today 5xxx/xxxxxx/54
found carbtune to be excellent
as was the delivery time
(Carbtune sent Friday 24th. Arrived Tuesday 28th in Victoria, Australia)
From: "Bxx Pxxxx"
Sent: Thursday, March 23, 2006 9:23 PM
Sean,
Thanks for the great service. The Carbtune II looks great and Iappreciate the high quality. The mail came too late for me to domuch but set it up -- I'll be trying it out tomorrow.
Thanks so much,
Bxx Pxxxx
From: Axxxxxxxxxxx@aol.com
Sent: Wednesday, March 22, 2006 6:16 PM
Hi Sean. Wow! Fast response to my email, very impressive. Thanks forthe update, I will email as soon as it arrives. I'm really lookingfoward to receiving so I can check the sync on my carbs on a regularbasis. I've used a friends in the past and it works wonderfully. YourCarbtune is an awesome piece ofequipment.
Thanks again,
-Axxxx
From: Ivan Liew
To: 'morgan@carbtune.com'
Sent: Thursday, June 15, 2006 6:29 PM
Subject: Testimonial
Very fast shipping! I got the product quickly and I ordered fromSingapore. Used it for the first time today on my Yamaha FJR1300and the tool is very good. The air restrictors work perfectly,and I was able to sync my throttle bodies within 0.5psi. Thefactory spec calls for within 1.0psi and before syncing my bike wasabout 1.5psi. The bike runs runs noticeably smoother. Itwas easy to do, so I will do every 10,000kms instead of the recommended20,000kms now. Another 1-2 more uses and the Carbtune will pay foritself!
From: "Bxxx Gxxxxxxx" <mxxxxx@bellsouth.net>
Sent: Sunday, March 19, 2006 4:05 AM
I have to say the CarbTune IS the answer to making sure my bike is
running its best. Why pay someone else to do what takes a few minutes
and save money and the time it would take to deliver a bike to a
mechanic. The pouch that comes with the CarbTune II is topnotch.
Even after changing my jetting to dial in, syncing the carbs was the
least of my worries with the CarbTune II. Using it twice has paid for
itself twofold!
Bxxx Gxxxxxxx Georgia USA
From: "Exxx Rxxxxxxx"
Sent: Tuesday, March 07, 2006 12:26 PM
Hi,
Just had to email you to say thanks. Superbly speedy delivery andqualityproducts. The Carbtune II and 90 degree driver set made balancing thecarbson Bandit 600 easy - only took me 20 minutes. The bike now runs betterthanever (I suspect the previous owner had tampered with it) and is lessnoisyat tickover now.
Thanks again for your excellent service and a
great product.
Best Regards
Exxx Rxxxxxxx
From: "Jxx" <jxxxx@comcast.net>
Sent: Sunday, March 05, 2006 11:26 PM
I recived the package in Saturdays mail. Just in time to tune the bikethiswekend. Great product,and great delivery. Thank you J.Sxxxxxxx
From: Cxxxx@aol.com
Sent: Friday, March 03, 2006 7:55 PM
Hi,
Recieved the items today, They are very high quality and aboveexpectations.
Best Regards.
ST.
From: Gxxxx&xxxxx
Sent: Thursday, March 02, 2006 1:36 AM
Hello Sean
I received my tool today 3/1/06. It looks like a very nice tool. Havenothad a chance to use it yet but probably will use it in a couple ofweeks.Thank you so much for your quick replies to my emails. If I would havepurchasedthis
through EBay from you I would definitely give you positive feed back. Iwoulddo business with you again. If anybody asks me where to buy one ofthoseI will tell them about you. Thank you so much.
Gxxxx.
From: Mxxxx Sxxxxx
Sent: Saturday, February 25, 2006 7:21 PM
¨Hi Morgan, to your testamony section:
I have adjusted the carbs on my CBR 1000 F -92 today and it was veryeasyand precise to do with the Carbtune meter. I would not hesitate torecommendthis well designed and manufactured product to anyone. No fuzz andgreatinstructions and functionality. I'll use it also on my GSX R1000 tocheckthe cylinder balance at next
service.
Mxxxxxx in Sweden
From: "Sxxxxxx Mxxxxx"
Sent: Tuesday, February 21, 2006 9:00 AM
Parcel arrived 8:15am 21st February 2006. That is, 22 hours after Iplacedthe order.
SxxxxM
From: "Nxxxxx, Txxx"
Sent: Monday, February 06, 2006 6:42 PM
Hi Morgan,
I have received the Carbtune II. It came in mail on Friday Feb 3. Thankyoufor the great service. From my point of
view, your on-line service is rated 10 from 1 to 10 and 10 being thehighest.
-txxx AZ, USA
From: "Cxxxxxxxxx, Mxxx" <Mark.
Sent: Monday, February 06, 2006 8:58 AM
Subject: Many Thanks!!
I just wanted to say a big thanks for the excellent service andproduct.I ordered a Carbtune for my 2004 Triumph Bonneville by phone. Thefollowingday it arrived about lunch time......... excellent service !!!
I used it for the first time this weekend to adjust the carbs on theBonnie.I am only a home mechanic, but had no problems using the equipment.The instructions are clear and helpful, and the process is much easier thanusingdial gauges. I had the carbs balanced in no time at all.
An excellent easy to use product!!
Many Thanks
Mxxx (Manchester)
(P.S Please feel free to use this on your testamonials page!!)
From: Lxxxxxx
Sent: Friday, January 27, 2006 5:23 PM
I just wanted to email you to tell you that your Carbtune II is anexcellentmeter. I just used it today to sync the carbs on my FZ1 and it was easytoset up and sync. It's also one of the best looking manometers. Nice jobondeveloping the Carbtune.
From: A T lxxxxxx
Sent: Friday, January 20, 2006 11:03 AM
hi sean,
thank you very much for your speedy and extremely helpfull answer to myquestion.a T peice connector would do the trick and i would be extremelygratefullif you could please mail me one. thank you once again for fantasticcustomerservices from what has got to be one of the most helpfull and customercaringcompany i have ever
had the pleasure of dealing with.
best regards alxxxxxx.
From: Dxxx & Txxx
Sent: Friday, January 20, 2006 11:02 AM
Thanks for the fantastic service, I received my order4585/180106/89 today.
Regards Dxxx.
From: "T B" <txxxxxxxxxx@hotmail.com>
Sent: Wednesday, January 11, 2006 2:55 AM
Hi Sean.
I tried to send an email to you yesterday but was having trouble withthemouse and not sure if you
received it, so here goes. Received the unit yesterday- (01/10/06) -thiswas only 5 business days from when I placed the order. The Carbtune IIappearsto be exceedingly well built. Should last for decades. Instructions
are simple and clear. Can't wait to use it. The quality andattentionto detail far exceed most products manufactured by any companytoday. I will definitely recommend to friends.
Please use this as a testimonial at your discretion.
Thanks and will order again soon!
Dxxxxx PA, USA
From: <g.xxxxxxxxxx@tiscali.co.uk>
Sent: Wednesday, January 04, 2006 6:42 PM
Hi sean.
Carbtune arived today,4th. Brilliant tool and so simple, i wish ihadbought one years ago.
Many thanks.
Gxxxxx Sxxxxx.
From: <mxxxxxxxxxxxxx@fxxxxxxx.it>
Sent: Sunday, December 18, 2005 3:29 PM
Italy Trieste, 18th december 2005
hi Sean
I have received my Carbtune (ordered on 6th december) on 16 th. Itseamsto be well done and
today I have tested it on my bike BMW R1150 rs twin sparks;
it works very well without any problem and it's very simple toaccuratethe fuel ignition. Great
work, I'll suggest the carbtune to my friends.
Best regards
Mxxxxxxx Bxxxxx
From: jxx bxxxxxx
Sent: Sunday, December 11, 2005 9:00 AM
hello mister Morgan.
I will thank you for sending so fast and correctly the carbtune || tome.I use it already and the results are great.
a lot off thank
j.j.bxxxxxx from the netherlands
From: Lxxxx Kxxxxx
Sent: Friday, November 25, 2005 10:27 PM
just a note on my recent order, it arrived as said, was a little unsureofthe whole carb sync deal, but after reading your instructions and usingyourcarbtune II, it was a piece of cake and sooo easy to do, now the carbsare"in sync" and the bike is running better then ever, cannot wait to useiton my ATV next!!! thank you
again.
Lxxxx kxxxxx Hawaii
From: Uxxxxx
Sent: Friday, November 25, 2005 9:43 PM
Sean
It arrived today, Thank you so much. The instructions are clear andprecise.It took me 10 minutes to do the initial set up. Warmed the bike, GoldWingGL1200 Interstate, carburetors were way out, took 10 minutes to
synchronize runs like a dream. The best purchase yet. I rebuilt thecarburetorslast week and this has been an invaluable tool. I shall keep the bikerunningon top form now.
Regards,
Nxxx Gxxx VA, USA
From: "Bxxxxx, Sxxxx"
Sent: Tuesday, November 22, 2005 5:06 PM
Sean,
I received the Carbtune in the mail yesterday. I have never usedoneof these tools before and was unsure about how to use it. Once Igotit all hooked to my 2005 Royal Star Venture I was shocked at how easyitwas to use. The Carbtune 2 is an awesome tool. I will berecommendingit to everyone in my chapter.
Thanks for a great product. TX USA
From: "Jxxx Axxx"
Sent: Tuesday, November 22, 2005 1:42 PM
Sean, I received my shipment yesterday. I'm very impressedwiththe quality upon my initial inspection of the items, even the 5.95multitool and flashlight. I didn't expect much for that amount ofmoney. I must say everything appears to be very well constructed. Ihaven'thad the opportunity to adjust my carbs yet, but I can't
wait to give it a try.
Thanks very much.
Jxxx Axxx / Savannah, Ga.
From: "Dxxxx Exxxxxx"
Sent: Sunday, November 20, 2005 4:37 AM
Dear Sean,
I received my Colortune and Carbtune yesterday, Friday November, 18.Thankyou very much for a fantastic product. It made the carb synchronizing apieceof cake and I can't believe how far off the synchronization was and howmuchsmoother it runs now. I will recommend the Carbtune to all of my familyandfriends.
Sincerey,
Dxxxx A. Exxxxxx MD, USA
From: <kxxxxxxxxxxx@ntlworld.com>
Sent: Saturday, November 19, 2005 7:57 PM
Hello Sean,
Thanks for dealing with my order so quickly. I ordered a Carbtuneon16th November and it arrived on 18th November. It's a brilliant toolandI'm sure other customers have reported how easy it is to set up and use.
My Yamaha Vmax has been running roughly for a couple of weeks and theCarbtuneshowed that all
carburettors were out of syncronisation but this only took a couple ofminutesto cure............ Thanks again for a great tool and promptdelivery. I will certainly recommend you to others.
Regards
Kxxxx Bxxxxxxx
From: "Axxxxxx Bxxxx"
Sent: Thursday, November 17, 2005 9:06 AM
Dear sir or madam
I'm just letting you know i received the above order yesterday morning(16/11/05), also i like to add was very impressed with the service i received andwith the products as
well, thank you.
Yours sincerely
Axxxxxx Bxxxx
From: Sxxxx Txxxxxxxx
Sent: Tuesday, November 01, 2005 2:05 PM
Hi,
Just a short note to say thank you for your superb service. I orderedmyCarbtune II on Sunday evening online and received it this morning(Tuesday).This service is second to none. I have also already used the Carbtuneonmy Honda ST1100. I had suspected that all was not well with thesettingsas the tickover was lumpy and hunted somewhat. I found that one carbwasway out of balance and that the two banks of carbs were slightly imbalanced.This was soon corrected using the Carbtune and the engine now ticksoverand runs perfectly. Your machine is robust and easy to use and does agreatjob on the ST1100 for which I would highly recommend its
use. Thank you for producing a superior product and for sending theunitout so quickly.
Keep up the good work!!
Sxxxx Txxxxxxxx UK
From: "Txxx P"<txxxx@txxxxxxxxxxxx.freeserve.co.uk>
Sent: Friday, October 28, 2005 6:19 PM
Many thanks for the extremely quick supply of a Carbtune II, pouch and90degree driver. I spoke
with you on Tuesday morning and the order arrived at 11.45 amWednesday...incredible...thanksfor
that. I have already used the 'kit' on my 05 Yamaha Fazer Thousand.Althoughthis bike has only covered 1,270 miles the carbs were a little out ofsynch;well within the prescribed 2cmHg, but you can always improve on that. Ihadalready increased the idle mixture screw settings from one full turnoutfrom full in, to one and a half turns out (Yamaha owners clubrecommendation).With the Carbtune II fine balancing of the throttles was simplicityitselfand much more accurate than the vacuum gauges that I used to employ forthisjob. The 90 degree driver worked very well, I had used a Wurth 90degreedriver before but this has a much bulkier bevel gear housing makingaccessto the carbs difficult, your device is excellent for access because itisso much slimmer and the feel
is very good. ....
Once again thank you for the quick delivery.
Yours sincerely
Axxxxxx Pxxxxxx.
From: Dxxxxx Fxxxxxx
Sent: Monday, October 24, 2005 7:16 AM
Dear Sean
I forgot to inform you that I duly received the Carbtune in about oneweek.Yesterday I tried it on my old Bmw R100 and it worked perfectly (muchbetterthan my Twinmax...). As promised, today I will reccomend Carbtune to
my Italian friends ............
Best Regards
Dxxxxx Fxxxxxx
From: "Cxxxx Sxxxxxx"
Sent: Tuesday, October 11, 2005 6:59 PM
Hi,
Just to inform you that I`ve received the item, also wanted to tell youthatit is an outstanding tool I am impressed. Well done. Thanks again
Regards
Cxxxx Malta
From: Jxxx Gxxxxx
Sent: Monday, October 10, 2005 5:39 AM
Dear Mr. Morgan,
I bought this as a gift for Sxxxx Mxxxxx. He is one of theleadersof the Kawasaki Concours Group in the US. He really loved hisMorganCarbtune and was impressed with how much better it worked than just theoldmercury and tube set up he had before. He has helped me, and othersworkon their Concours at his many "tech" sessions, and he thought yourproductwas very well made, and it performed flawlessly.
Thanks again,
Jxxx Gxxxxx OR. USA
From: "Pxxxx Rxxxxxx"
Sent: Friday, October 07, 2005 5:27 PM
Hello Sean,
My Carbtune arrived this morning (Fri.), it was ordered Weds. Night.Thisis what I call excellent service, thank you. ...
Regards
Pxxxx. UK
From: "Gxxx Mxxxxxxx"
Sent: Tuesday, October 04, 2005 7:26 AM
I think I forgot to let you know I got everything OK. ......And itworksgreat. And the right angle
screwdriver is truly wonderful. Now I can actually adjust the carbs. Ihada Mac one that was a lot heavier duty, but it simply didn't work in theenclosedspace under the carbs so was worthless. Yours is great. Thanks forofferingit.
Your service was excellent, too. Thanks.
CA. USA
From: "Cxxxx Bxxxxx"
Sent: Sunday, October 02, 2005 2:19 AM
Thanks for the great product it works great
CA, USA
From: "j-bxxxxx@dxxxxx.co.uk"
Sent: Wednesday, September 28, 2005 10:21 PM
Many thanks for the superfast delivery of my Carbtune - orderedThursdayafternoon and delivered Saturday morning. What a brilliant device.Simpleto use and made setting up my ancient Guzzi easy. I've owned the bikefor20 years and I reckon its never run as smoothly. Now to fight myfriendsoff
- they can buy their own
JB (a very very satisfied customer)
From: rxxxxx.wxxxxxx
Sent: Wednesday, September 28, 2005 8:28 PM
hi just to let you know I received my carbtune on Monday the 26th septonly2 working days after my
order now that is 1st class service that a lot of bigger companies cannotprovide would recommend
to anybody UK
From: Nxxxx Sxxxx
Sent: Monday, September 26, 2005 8:10 PM
Many thanks for the prompt despatch of my order.
Ordered 11.45 Friday 23 September, arrived 9.30 Saturday 24 September.
Regards
Nxxxx Sxxxx UK
From: "Mxxx" <mxxxxxxx@bellsouth.net>
Sent: Friday, September 23, 2005 2:34 AM
Sean, Just thought I would let you know, Order was received 9/20/05. Iused it today and it is amazing at the difference in the way the bikeruns. The air/fuel mix was way off on it and the colortune workedlawlessly. The only thing I wish I had done was put in the the shop,where I could've turned thelights off when I used it. It would've helped me tremendously. Oh Well,Liveand learn LOL!!! Thanks again for your prompt
servcice.
Mxxx Pxxx Tn. USA
From: "Axxxx, Sxxxx
Sent: Tuesday, September 20, 2005 3:56 PM
Sean,
I just wanted to drop you a follow-up note now that I've had the toolfor a bit and have been using it.
First, though, I'd like to again commend you for your excellentcustomer service. You folks are awesome, and I kinda wish yousold something else I need just so I can support you some more...
Anyway, the tool is awesome! Works great, no issues at all, andno mercury to spill, store, or for my small kids to drink.
Thanks again!
Sxxxx Axxxx CA. USA
From: "Axxxxxxx & Txxx"
Sent: Monday, September 19, 2005 10:54 PM
Hi Sean,
received your set last Friday (16 sep). I had ordered it on Monday (12sep). So very fast delivery indeed.
Set works great. Thanks!
Regards, Txxx (Holland)
From: "kxxx oxxxxxxxxx"
Sent: Monday, September 19, 2005 11:18 AM
I just wanted to let you know that I synced my carbs and should havedone it
this way years ago. I always paid to have this done but now I can do it
myself even better. My bike rund like crazy again. All my cil's wereout of
sinc and now there work how they shoudl.
Thank you!!!!!!!!!!!!!!!!!!!!!!!!!
kxxx Netherlands
From: "Jxxxx Mxxxxx"
Sent: Thursday, September 15, 2005 9:34 PM
Just dropping a line to let you know that I recieved my order on themorning of September 12,2005. Very nice construction on the carbtune,smooth operation, easy to use once I converted inches(which I was useto) to mm. Colortune works great also. Another satisfiedcustomer, Best Regards J.W.Mxxxxx. KS. USA
From: Sxxxxxx, Lxxxxx
Sent: Tuesday, September 06, 2005 4:53 PM
Hi there,
WOW…I have received the Carbtune in Oregon this week end.
The Carbtune looks a great product. I really like the tool pouch also.
I will be using it on my FZ1000 to keep her carbs spot on. I had heardthat members on the FZ1OA forum raved about the product so I got one.
Thanks for hassle free online ordering and great shipping to Oregon.
Regards,
Lxxxxx Sxxxxxx
From: Bxxxxxx Pxxxxxxxxxx
Sent: Tuesday, September 06, 2005 5:34 AM
Subject: Testimonial
Hi Sean,
Having spoken to you on the phone and ordered both the Coloutune &the Carbtune, I was amazed to find them on my doorstep in six days !!This, considering I live on a small island off the Queensland coast istruly amazing.
I wanted to thank you for both your prompt service and your response tomy queries / request for help. I can confirm that both these items workperfectly and I've now been able to finally set up my Alfa in a way I'dpreviously notthought so easily possible.
Thanks again Sean, you deserve to prosper, giving such excellentservice and I'd recommend anyone (and have already) to get both theCarbtune and theColoutune.
Gxxxx Bxxxx
Queensland
Australia
From: Bxxxxxx Pxxxxxxxxxxx
Sent: Monday, September 05, 2005 12:27 PM
Hi Sean,
Well, to say I'm impressed with your response would be anunderstatement for sure !!
Following your diagram - the larger one, it is now clear to me that,going from the one in my workshop manual, it actually showed the wrongscrew marked as the blanking screw - hence my error.
As soon as I got your email etc, I went out and checked and, sureenough, I found the screw, tried your adaptor and it fitted fine !!
Many, many thanks for your attention and response. I'll keep thatdiagram now !!
Thanks again I'm very grateful for your efforts - no wonder you get somany satisfied customers !!
Regards
Gxxxx Queensland, Australia
From: Dxxxxx Dxxxxx
Sent: Monday, September 05, 2005 4:44 AM
Hi Sean.
Just letting you know I have received the 2 colortunes (I ordered 2separately) that I had ordered from you. They both took 8 days inarriving (Brisbane Australia)which I think is quite reasonable considering they had to come from theotherside of the world. I have already used them on my bikes and they workedperfectly.I am very impressed at how easy they are to use. So thanks again.
Best Regards
Dxxxxx
From: Exxxxxxxx Cxxxxxxxxxxxx
Sent: Friday, September 02, 2005 7:52 PM
Sean...thank you for remembering me. I have placed an order forthe 12mm Colortune and look forward to receiving it.
I cannot express how much I apprecaite doing business with a companythat actually does what they say they will do. It is becomingmore rare tofind individuals who believe a handshake or their word actually hasvalue.
Again...thank you. Have a wonderful day.
Vxxxxx "Bxx" Bxxxxx
Indianapolis, IN USA
From: Bxxx Axx Fxxxx
Sent: Thursday, September 01, 2005 4:16 PM
Hi Sean Morgan.
This is the best service ive ever experienced from an abroad (for me)company! :-)
Yepp, just place the order mister, I am looking forward to tune up thevehichels here. BTW, the carbtune does a somewhat perfect job for thebikes here, dont understand how its possible to live without one ;-)
Later
Bxxx Axx Fxxxx Norway
From: Cxxxxxx Fxxxxx
Sent: Thursday, September 01, 2005 8:54 AM
Hello, I could no longer wait for the weather to break I have beengoing nutz waiting to use my new toy lol. Anyhow I have to tell you Iam very impressed with your Carbtune2. After set-up it took only a mere10 mins to sync all 4 carbs on my 04' V-max. Out of the 4 carbs I hadone that was way off but with your tool it came right inline with theother 3 with a few small adjustments. I will be testing the setup todayI took it for a short test run after initial settting but I had troubletesting because the road was wet. Every time I nailed the throttle thebike broke the rear tire loose.
I will surley be ordering your spark plug kit to set the air fuelmixture as soon as I get a few dollars put toghther for it. With thelarge hurricane that has just tore up the Gulf coast over here gasolineis setting all time record highs. So I will be using my V- max alot inthe comming months as longas I can anyway. The snow will be flying over here in about 2 months.Thanksfor a great tool I was not disapointed. It has almost paid for itselfonits first use. They charge $40.00 U.S. over here to sync my carbs. Nottome anymorelol.
Thanks Wxxxxxx PA USA.
From: pxxx sxxxxxx
Sent: Saturday, August 27, 2005 5:02 PM
Subject: A BIG THANK YOU
Dear Carbtune
Just a short e-mail to say a big thank you and how impressed with yourservice I was.
I ordered my parts on thursday morning approx 10-00am and on friday morning before 9-00am they were at my door.
So thanks again for a great service.
yours most impressed
Pxxx Sxxxxxx
From: tXXXXXXXX
Sent: Wednesday, August 24, 2005 4:20 PM
Hey,
Used my Carbtune II just now and WOW !!!
So simple, So accurate, So GOOD.
My GS500 now sounds like a swiss clock :-)
Anyway, I'm satisfied.
Best regards,
KXXX HXXXX.
From: "mxxx" <mxxxxxxxxx@yahoo.co.uk>
Sent: Tuesday, August 23, 2005 7:32 PM
Subject: Great bit of kit.
Hi Carbtune,
Just used the carbtune for the first time and would
like to say what a great piece of kit it is.
I am a ex-mechanic of many years and all the garages i
worked in used dials with needles bouncing around all
over the place and used clamps on the hoses trying to
get some damping, i would spend an hour trying to get
a good reading before even attempting to balance the
carbs.
My own set of vacuum dials recently got flattened when
someone drove over them which is why i bought a
carbtune and frankly it's the best thing that could
have happened to them!
I have just used the carbtune on my Yamaha FZX750
(import to the UK) which is tuned with FZR1000 carbs
fitted, as i had rebuilt the carbs when i first hooked
up the carbtune they were all over the place but in
five minutes (and i mean five minutes!) they were
balanced and i had a perfect tickover, pickup and
shutdown.
The clutch had also stopped rattling on tickover, a
common problem on multi-cylinder, multi-carb engines
because the cylinders are fighting against each other
when the carbs are not balanced and cause the clutch
drive gears to rattle.
Balancing carbs has gone from being a hated awkward
job to a pleasure.
Please feel free to edit and use this in your
testimonials if you wish.
Thanks.
Regards,
Mxxx Dxxxxx.
From: "sxxxxxxx x"
Sent: Friday, August 19, 2005 2:14 PM
Subject: reception de colis 3286/160805/44
Je vous envoie ce mail uniquement pour vous prevenir la reception ducolis
Je tiens aussi a vous feliciter de la rapidite de livraison ma commandeest
passe ce mardi et reception aujourd hui!
Tres bon service
A bientot (Sent Wednesday, received Friday,Belgium)
From: "Axxx Sxxxxxxx"
Sent: Friday, August 19, 2005 11:58 AM
Hi Sean,
The parts arrived this morning and all sorted now.
Thank you once again for such a swift and professional service, all toouncommon these days!
This service will certainly be noted round our club so anyone who ismaybe not sure of your products or company can have their minds put atease..!
Thanks & regards
Axxx.
From: Mxxxxx Axxxxxx
Sent: Thursday, August 11, 2005 2:59 PM
ORDER RECEIVED AT START OF THIS WEEK TUESDAY. VERY QUICK DELIVERY ASONLY ORDERED ON SATURDAY.
THANK YOU.
CARBTUNE WORKS VERY WELL AND MY DUCATI 750 SS (1992) CARBS' ARENOW SET UP AND ITS ENGINES RUNNING IS MUCH IMPROVED.
NOT CHEAP BUT A GOOD PIECE OF MEASURING EQUIPMENT.
CHEERS.
From: Ixxx Cxxxxxxxxxx
Sent: Wednesday, August 10, 2005 2:10 PM
Hi,
Order No. 3xxx/050805/xx received 09/08. My bike had beendealer seviced 1400 miles ago, on checking the throttle body balancethey were out an absolute mile! I cannot beleive that I am riding thesame bike. It's a pleasure to see a NI company producing aworld-leading product
Many Thanks Ixxx
From: "R & J xxxxxx"
Sent: Tuesday, August 09, 2005 8:36 AM
Hi Sean,
I received the adaptors today in perfect condition and I would like tosay thanks for the great service and I will definitely use you in thefuture whenI purchase a tool pouch.
Thanks again,
Regards, Rxx. Australia
From: "Pxxx Sxxxxxxx"
Sent: Tuesday, August 09, 2005 3:06 AM
Dear Morgan,
I recieved my Carbtune II today in Pensacola, Florida. I was able tosync my Carbs on my 2004 Yamaha FZ1 in about an hour. Yourproduct worked great and my bike now runs much smoother at idle. The order was made on 29 July and I recieved the Cartune II on 8Aug. Thank you for your prompt delivery and great product. I will tell my friends about this positive experience.
Sincerely,
Pxxx Sxxxxxxx
From: Dxxxxx Dxxxxx
Sent: Thursday, August 04, 2005 7:55 PM
I wanted to let you know that the carbtuner was easy to use and thequality of the meter was a lot better than expected, I also bought the90 degree driver,nice piece also. With shipping to the states, it cost about whattheshop wanted to do the job one time. Now I can do it as often asneededfor free! Thanks again.
Dxxxxx Dxxxxx Wv USA
From: "Nxxxxx Jxxxx"
Sent: Wednesday, August 03, 2005 3:03 PM
Sean,
Wanted to let you know that I received my Carbtune last Friday, July29th
upon arriving home. The tool was in perfect condition and worked
flawlessly. I appreciate the quick and friendly customer servicethat you
and your company have provided.
Best Regards,
Nxxxxx S. Jxxxx, Virginia
From: Gxxxxx Sxxxxx
Sent: Wednesday, August 03, 2005 5:18 PM
Hi Sean
Thanks for the last email. .....
The balancer works well and is easy to use, congratulations on a goodidea.
I might be ordering the clear spark plug soon.
Cheers
Gxxxxx Sxxxxx of Gxxxxx South Africa
From: kxxxxxxxxx@comcast.net
Sent: Saturday, July 30, 2005 2:43 PM
Sean,
Just a quick note to let you know how pleased I am with theCarbtune. I have a 1995 Kawasaki Concours and a 1974 KawasakiZ1. First the Concours. I always thought that the "Connie"ran great; however, it always had this annoying habit of surging at lowspeeds/RPM as when moving in slow traffic. After synchronizingthe carbs using the Carbtune I can now cruise along in sixth gear at 30MPH and it's as smooth as silk. Amazing difference! I thensynced the carbs on my buddies Connie and he experienced the sameresults. He was amazed how much it smoothed out his bike. Next theZ1. I have owned my "Z" since 1976 and have only put about 35K miles onit. It always ran good and I kept the carbs in tune using an old mercuryfilledmanometer. This spring I pulled the "Z" out of winter storage anditwasn't running so good so I tried to sync the carbs using the mercuryfilledmanometer. It was running so poorly that it drank the mercuryrightout of the tubes. That’s when I started looking on the internetfora better tool and found the Carbtune. After syncing the "Z's"carbswith the Carbtune I experienced the same results as with the"Connie." It hasn't run this well in years. If you ever need an endorsementIwould be more than happy to tell my story to anyone.
Best regards,
Kxx Txxxxxx
From: Gxxxxxx Bxxxxxxxx
Sent: Friday, July 29, 2005 5:55 PM
Many thanks for the rapid delivery. My son has now tuned hiscarbs and the bike is going much better. Money well spent.
From: Dxxxxxx Dxxxxx
Sent: Wednesday, June 29, 2005 2:38 AM
Sean..... I recieved my Carbtune sync sticks today in the post....Twenty minutes to read the instructions, 5 minutes for assembly and toget the bike up to operating temp.... five minutes later it was sync'ddead on........... Outstanding tool
Thanks...... Dxxxxxx Texas
...... I forgot to mention,,,,,,, it onlt took 6 days total to get frommy wish list to my work bench.... Great job........... Dxxxxxx
From: "WXXXXXX SXXXXX"
Sent: Thursday, June 23, 2005 7:18 PM
Hello -
I received my Carb Tune today, June 23rd. I ordered it on the18th -
that's FAST!......
Thanks,
WXX NewJersey
From: Jxxxxxx@aol.com
Sent: Wednesday, June 22, 2005 6:27 PM
Hello There,
Just to let you know the accessories my wife ordered yesterday arrivedsafely today!
So thankyou for an excellent service, also I am still using my originalcarbtune
bought 17 years ago.
Thanks again
Sxxxx Bxxxxx
From: "Fxxxxxx Dxxxx"
Sent: Tuesday, June 21, 2005 4:32 AM
Thanks for the quick delivery. My purchase arrived on SaturdayJune 18 2005. I'm impressed with the rapid delivery. Ireceived your product from the UK a lot faster than the parts that Iordered online through a US store. I'll use carbtune once I get theparts for the bike.
thx.
Fxxxxx Dxxxx FL
From: <axxxx.mxxxx@cxxxxxx.net>
Sent: Thursday, June 16, 2005 12:25 PM
Je viens de recevoir la livraison de ma commande .
Le carbtune est bien dans sa pochette, trés bienprotégé, et en parfait
état, je ne pensais pas, vu les délais de livraison quevous indiqué
,qu'il arriverait aussi vite .
Je compte l'utiliser ce week-end et vous enverrais mes remarques sur la
facilité ou non de son utilisation dès que possible.
Il est tout de même dommage qu'ayant commandé depuis laFrance il n'y ait
pas un manuel d'utilisation en français joint dans le colis .
Je suis allé sur votre site pour télécharger lemanuel en français.
Comme je suis trés conservateur ,j'aime bien posséder lesrevues
originales des appareils que j'achète.
Merci tout de même , et a bientôt dans mon prochaincourrier.
PS: Pour tous ceux qui hesiteraient avant de commander , je leur indique
que le service est serieux et rapide.
From: kxxxxxxxxxxtiscali.co.uk
Sent: Tuesday, June 14, 2005 9:16 PM
Hi Mr Morgan,
I ordered a Carbtune via the telephone to balance the throttle bodieson my Moto Guzzi V11 Sport.
As soon as I connected and used the balancer I had complete faith inthe accuracy of the guages - I could tell the product had beencarefully designed and engineered properly.
After a little time familiarising myself with the throttle stops on thebike I was able to achieve an excellent balance and correct idle speed.
I will certainly endorse Carbtune with my biking friends.
Many thanks,
Kxxxx
From: Ixx Axxxxx
Sent: Monday, May 30, 2005 9:13 AM
Hi Morgan Carbtune
Just a quick note to let you know i received my order on Wednesday 25May in perfect condition, thank you very much for such a fast delivery,I've nowbalanced the Carbs on my GTR 1000 and the performance has increaseddramatically for more smiles to the mile now. Thanksagain Ixx
From: Bxxxx Rxxx
Thursday, May 26, 2005 1:12 AM
I received my order today and was very pleased, it was just asadvertised.
Thought you might enjoy knowing why I have been hoping it would gethere quick.My next door neighbor has a small grandson and has him overonce or twice a weekWell on his last visit he had a toy tool set withhim and came in to his Grandma and proudlytold her he had tightened upall the loose screws on my motorcycle for me. She alerted me and Ichecked it out and found all of my carb screws tightened down all theway. It is spring here in Atlanta and it would take forever to get itin the shop, so I ordered your carbtune 2It had my VMax back in topshape in about 20 minutes. I am very pleased andfeel it is well worth the money paid. I keep a close eye on hergrandson nowso he doesn't do me any more favors.
thanks
Bxxxx Rxxx
From: "Txxxx Sxxxxxxx"
Sent: Tuesday, May 17, 2005 1:28 AM
Morgan, got the tool and set up the bike.. works great.. thanks for such a
great tool.....
Sent: Thursday, May 12, 2005 6:40 PM
Hello Sean
Wanted to touch base with you. I rec'd my carbtuner yesterday andit works great... Thnaks so much and I hope to do more with you...
Fxxx
From: "Nxxxxxxx Axxx@Oxxx"
Sent: Wednesday, May 11, 2005 8:44 AM
Hi...
I'm impressed with fast delivery... so far this is the
fastest delivery of items that i bought thru
internet... morgan send me the item on 27/4 and it
arrives in Malaysia on 5/5 and to my hand on 11/5...
about 2weeks after confirmation... other things that
i've bought normally takes 1~2 months!!!
Thank you very much... I'll write my feedback on the
carbtune II asap...
Thanks.
Jimee
From: "The Pxxxx"
Sent: Tuesday, May 10, 2005 11:56 PM
Hi Sean,
The Carbtune arrived yesterday. The tool works great andthe bike now runs
smoothly.
Thanks, Bxx
From: Craig Hufton
Sent: Monday, May 09, 2005 6:08 PM
Sean,
bit late reply but thanks, brilliant serviceagain.
Craig
From: Lxxxxx@xxx.de
Sent: Monday, May 09, 2005 3:57 PM
Hi Sean,
Carbtune received within one week after order. What should I say- it works
perfect and it is easy to use. Its really a "MUST HAVE" for Bikers.
Best Regards from Germany.
From: "Wxxxxx Gxxxxxx" USA
Sent: Wednesday, May 04, 2005 11:02 PM
carbtune arrived 5/2 tried it out today and worked great
Thanks
From: Pxxxx Hxxxxxxx
Sent: Wednesday, May 04, 2005 12:56 AM
Hello
I have just received my Carbtune here in Australia. Thanks for yourhelp in this purchase. It will be very interesting to compare theMorgan against the Sxzxki supplied balancer. Suzuki one cost $500 needsto be calibrated before every use and is sh*t. The Morgan one turnedout to cost $162AUSand is very good.
Once again thanks.
Pxxxx Hxxxxxxx
Motorcycle Service & Technical Advisor
Sxxxxx Australia Pty Ltd
From: Dxx Oxxx
Sent: Monday, May 02, 2005 10:14 PM
Sean,
My order of a 4-column Morgan Carbtune II and Toolpouch have beendelivered. It was a pleasant surprise to receive a transatlanticshipment in only one week.
Based upon the positive comments by others who have used yourCarbtune II, I look forward to synchronizing the throttle bodies on myHonda VFR800. Quality diagnostic tools always make such tasks go muchmore smoothly.
Thank you again,
Dxxxxx Oxxx USA
From: "Gxxxxx Axxxxx"
Sent: Friday, April 29, 2005 1:34 AM
Recieved carbtune this morning (28th april). Should have boughtone years
ago....my bike no longer idles like a twin and my fingers dont gonumb
when I'm riding it!!!
Many thanks
From: "AL H Sxxxxx JR"
Sent: Sunday, April 24, 2005 7:02 PM
Hey ! I Wrote yesterday questioning just how to connect upmy newly
received Carbtune kit. Well, went back to an old site Ihave used at:
http://www.elsham.pwp.blueyonder.co.uk/cx500/ run byRob Davis, Telford,
Shropshire UK. There he has included instructions(with pics) just how
to connect up the vaccum gauges and balance the carbs on my bike(the
Honda CX 500). (He should have used the Carbtunethough). Thought maybe
you might share this with your customers. It took me longerto remove the
tank and seat than it did to actually balance the carbs. Imight add that
it would have been even faster if I had purchased the carbtooltoo. The
carbs weren't that far out of adjustment, but the Carbtune kitbrought
them right into balance.
Thank you again,
Al Sxxxxx
Des Moines, Iowa USA
From: Mxxxxx@aol.com
Sent: Sunday, April 10, 2005 4:01 PM
Hello!
I have now used the Carbtune 4 times, workedon a '99 Suzuki SV650 yesterday.
The tool is great...no more bubbles in the mercury, nomore mercury to spill, compact and easily stored.
Txxxx Bxxx
From: Jxx Vxxxxxx
Sent: Friday, April 08, 2005 2:17 PM
The package arrived on March 06/05. I truthfully expected 4-6weeks for delivery, what with customs and such, so when I arrived homeI was shocked to see the package in my mailbox. Unbelievable!!
Thank you.
From: "Mxxxxxx Fxxxxx"
Sent: Wednesday, April 06, 2005 10:26 PM
Sean, received the Carbtune today... (April 6) that was quick,and no
duty.. nice. All in order. Thanks.. tomorrow I play.. yahoo.
Thanks again..... I know several who have bought this and theyall swear by
it. I hope to be impressed.
Mxxx.......
From: Sxxxx Wxxxxxxxx
Sent: Monday, April 04, 2005 1:38 PM
Dear Sirs
I ordered a carbtune and storage pouch on Thursday and it arrived onSaturday – fast delivery – thanks.
I used it to balance both my Benelli 750 sei (six) and my Kawasaki Z1B.The set up and operation was easy and straightforward with both bikesnow running much better.
Many thanks for a great product and superb service. Highly recommended!
Sxxxx Wxxxxxxxx
From: <rxxxxx-bxxxxx@quicknet.nl
Sent: Wednesday, March 30, 2005 9:13 PM
Hi Morgan
thanks a lott for the carbtune 2
good and fast delivery
thanks a lott
greatings a happy buyer
Rxxxxx Bxxxxx from Holland
From: "mxxxxx sxxxxx"
Sent: Monday, March 28, 2005 6:03 PM
Sean
The carbtune turned up on Thursday. Thanks very much I found itreally
straight forward to set up and use. The bike is now runningsweeter than
ever.
Best regards
Mxxxxx
From: "Txx K."
Sent: Tuesday, March 22, 2005 7:41 PM
This is one fine product. I've used mercury for years
but never again. The product was sent very quickly for
coming out of the UK. The pouch was a geat add on.
Thanks again.!!!!!
From: Bxxx Bxxxxxx
Sent: Friday, March 18, 2005 6:14 PM
Hi there,
I really want to thank you for the quick delivery of my order.
Everything looks ferry good and complete.
Thanks again and I will recommend your company to every one that needssomething you sell.
With regards
Bxxx Bxxxxxx Netherlands
From: Dxxxxx Gxxxxx
Sent: Tuesday, March 15, 2005 3:55 PM
Hi Sean, ………… …. I just wanted to let you know that the permanentadapters that I ordered arrived yesterday 03/14/05, very nice adaptersand at such a good price even with the shipping charge, it beatanything I could get here in the states………. I also want to say that thecarbtune that I purchased last year is one of the best products of it'stype that I have ever used, and I've been working on bikes andmulti-carbed vehicles since the latesixties.
Dxxxxx W. Gxxxxx USA
From: Dxxx P
Sent: Wednesday, March 09, 2005 2:03 AM
Outstanding. I have heard about your outstanding customerservice, so I was not concerned.
Thanks
From: "Txx Mxxxxxxx"
Sent: Tuesday, February 22, 2005 4:33 AM
The product arrived on February 17, 2005.
No damage occurred.
I love the product and it works very well.
I have used it on my Suzuki GSXR1000K3.
It runs and idles smooth now.
Thank you for the wonderful product.
From: "Bxxxx Sxxxxx"
Sent: Monday, February 07, 2005 7:05 PM
hi guys,
I got my carbtune II thiese days and I instantly
used it to sync the carbs of my new bird -
an FK9 ultralight aircraft with ROTAX 912,
4 cylinder/boxer/dual-carbs. And I can
confirm: your product works absolutely perfect!!!
syncronizing with CT II is no hassle and
straight forward. (...and the result of well
syncronized carbs in an aircraft is amazing :))
thanks for this nice tool!
if you like, check: www.seeger-grafix.de/fk9/
cheers
bxxxx Germany
From: Txxxx
Sent: Thursday, February 03, 2005 8:48 PM
Hi Sean,
Thanks for the great products. I received my order eiher onFeburary 1 or 2. I was out of town when it came in, so I can'tgive an exact date. I will praise your products onTheGSResourses.com. They are great.
Txxxx USA
From: "Gxxxx Cxxxx"
Sent: Wednesday, January 26, 2005 7:18 PM
Good Evening,
Well what can i say i am astonished at the speed in which you sentme
my Carbtune.Ordered late Monday evening and arrivedtoday(wednesday).
Excellent service and i shall happily recommend you to any friendswho
are wanting to purchase a Carbtune.
thank you very much.
a very delighted
gxxxx cxxxx
From: "J&L Bxxxxx"
Sent: Sunday, January 23, 2005 10:14 PM
Hello Sean,
You wanted me to let you know when I received my carbtune. Itarrived on
Saturday, Jan.22 in perfect condition. I used one of my palsCarbtune II ,
Jim Benson ,and was so impressed with it that I actually retiredmy mercury
sticks that are in fine WORKING ORDER. That should tell you allyou need to
know about the quality of your product. I'll keep spreading theword ,about
the best carb synchronizer, out there.
Thanks again for the "no surprise" ordering experience.
Jxx Bxxxxx USA
From: Lxxxxx
Sent: Thursday, January 20, 2005 1:45 PM
John,
I received my items this morning, just 36 hours after I placed theorder.
Many thanks for the excellent service.
Regards,
Bxx Hxxxxxx. UK
From: "Nxxx Bxxxxx"
Sent: Thursday, January 13, 2005 8:38 PM
dear Sean, the carbtune was on the table when i got home from work this
aft', after five minutes thought and ten minutes making somesuitable
adaptors to attatch said apparatus to the balance pipe stubs onthe inlet
tracts of 'the beast' (hybrid pre-unit t140 750 in a triton) wewere up and
running! I have to say that after some twenty three years oftinkering with
this bike I thought the carb balance was not too bad,wrong! First
indications were , interesting. so with a bit ofpractice I can look
forward to a new era of vibration free biking. well I can dreamcan't I !
Cheers for a very rapid service
nxxx bxxxxx
From: "Gxxxxx Pxxxxxxx"
Sent: Sunday, December 26, 2004 12:37 PM
Dear Sean,
I just balanced my bike's carb using Carbtune. It acceleratessmoother and
better now. The whole process took only 15-20 minutes, althoughthat was
my first time in carb balancing. Thanks for the great tool.
Best regards,
Gxxxxx – Indonesia
From: <bxxxxxxxxxx@tiscali.co.uk
Sent: Sunday, December 12, 2004 9:50 PM
Dear Carbtune,
Excellent service, ordered my carbtune sticks on Wednesday, in my hands
on Friday and balanced the carbs on my XS650 on Saturday. Smootherrunning,
even tickover and more responsive all round. Five stars for an easy touse
product. Thanks for your great service.
K. Bxxxxxx
From: "Pxxx Jxxxx"
Sent: Friday, December 03, 2004 3:35 PM
Hey, the Carbtune is a wonderful tool. I recieved it here in north
Texas in just under 10 days.
Thanks, pxxx
From: <rxxxxxx.xxxxxxx@bt.com
Sent: Friday, November 26, 2004 1:00 PM
Sean,
Just to let you know that it took a day to deliver. I tried itout on my 850 MotoGuzzi LeMans on Saturday and I it was so easy touse. I certainly couldn't do the balancing by ear/feel as yourgauge pointedout. The bike's a lot smoother as a result.
This Saturday its my wife's 400/4.
Great piece of kit.
Regards,
Rxxxxxx
From: Dxxxx Txxx
Sent: Monday, November 15, 2004 11:21 AM
Subject: 2 cyl Carbtune on a 4 cyl engine?
Hi Sean
................... ....BTW, please feel free to put the followingtestimonial on your web-site:
"Superb product - simple enough to be used by a novice with dramaticresults. Bike has never gone better. The companyalso give very prompt service and no question is too muchtrouble to answer"
Regards
dxxxx
From: "nxxxxxxx"
Sent: Friday, October 29, 2004 2:42 PM
Mr. Pxxxxxx Sxxxxxxxx
ITALY
Object: Acknowledgement of receipt Carbtune II 4 columns
Today 29 October has been delivered me the package you contain CarbtuneII 4 columns sent by You on October 25.
Your service of consignment is revealed impeccable and perfect! I havealready tried Carbtune II 4 columns on my motorbike, a Kawasaki ZR7,and you/he/she is noticed really exceptional both for functionality andfor the precision.
I/you/they have been very satisfied for produces them purchased, butabove all for the great seriousness and precision that you have shownme.
Your strategy of marketing is surely vincente,non ever change you her.
Dear regards
From: sxxxx txxxxx
Sent: Wednesday, October 27, 2004 2:30 PM
thanks,
i received the carbtune on Tuesday 26/10/04
it was ordered on sun 24/10/04 at 4pm.
very good service.
From: "Dxxx Bxxxxxx"
Sent: Wednesday, October 27, 2004 4:27 PM
Hi Sean,
Thanks for your info - parcel arrived this morning - that's what I calla fast service - brilliant !
Regards, Dxxx Bxxxxxx
From: <o.pxxx sxxxxxx>
Sent: Monday, October 25, 2004 8:36 AM
Subject: réception du CARBTUNE II le 11.10.2004
Bonjour sean.
Je n'ai pas pu vous recontacter avant car ma sociétédéménageait et je
n'avais plus d'ordinateur pendant une semaine.
J'ai reçu le CARBTUNE II le lundi 11 octobre 2004.
J'ai réglé hier ma moto et votredépressiomètre (le CARBTUNE II) fonctionne
très bien.
Le sérieux et la compétence de votresociété et de vous même m'ont
totalement satisfait et je vous ferait de la publicitédès que l'occasion
se présentera.
Je vous souhaite bonne continuation et suis sûr que votresociété
fonctionnera bien.
Si vous voulez m'envoyer de la publicité à mon adressepersonnelle, je la
lirais avec la plus grande attention mais de toute façon, jeviendrais
visiter votre site internet de temps en temps.
A bientôt j'espère et encore merci.
From: "axxx cxxxxxxxxx"
Sent: Tuesday, October 19, 2004 7:50 PM Received your product(carbtuneII)today(Tuesday) what afantastic piece
of kit !took about 30 mins to do the carbs on my gl1200I would
recommend it to anybody Thanks for a fantastic product M Cxxxxxxxxx
From: Dxxxxx MxXxx
Sent: Monday, October 18, 2004 9:19 PM
Dear Sean,
this is just to confirm delivery of my Carbtune II and tool pouch, theyarrived safely on Friday 15th, less than 48 hours after I ordered them!I can also confirm that they work perfectly, as soon as they were outof the bag and prepared they were in operation on my old air cooledfour. I'd pre-read theinstructions from the link you sent and I already had a betterthan fair idea.
I can't believe I've put off buying a set for so long, I only have touse it three or four times and it will have paid for itself completely!If a local dealer charges £45 per hour labour and in fairnesssays the balancing took half an hour (I did it in 15mins - firstattempt!) you can see wheremy maths is coming from. This doesn't take into account theconvenience and satisfaction of doing it yourself. Any simplerand it would be getting sponsorship from Lego!
Thanks for a fantastic service and a brilliant product!
Best regards,
Dxxxxx MxXxx
From: "Dxxxx Sxxxxxx"
Sent: Tuesday, October 12, 2004 7:14 PM
Sean,
Just to let you know I received my carbtune at 11:00 hrs Tuesday 12thOctober. Very impressed with the level of service, and the carbtunecould not possibly be improved.
Thanks and best wishes for the future.
Dxxx Sxxxxxx
From: Dxxxx Kxx
Sent: Wednesday, October 06, 2004 12:28 PM
Hi Sean
.......... ......Again the CarbTuneII is by far the simplest carbbalancer to use. Don't need to worry about spillingthe mercury. Simply a fantastic tool that has earned it'scost several times over.
Dxxxx Quebec
From: "Vxxxxxx Fxxxxxx"
Sent: Tuesday, October 05, 2004 9:17 AM
Unbelievable !!!!! The package arrived yesterday !!!!! ( Sent Friday,arrived Monday) You're serious and
fast in delivery ....thank you !!!!!
Tomorrow i try all the equipment ,than i write you a confirmation mailfor
the equipment...
Thank you again
V.Fxxxxxxx Roma, Italia
From: Dxxx Pxxxxxx
Sent: Sunday, October 03, 2004 10:47 PM
I ordered a Carbtune-II earlier in the summer and had it shipped to afriend in the US. About one month ago I retrieved it while on a tripthrough the eastern states and looked forward to using the tool upon myreturn home to Toronto. And nota moment too soon. On the 2500+ km trip my '86 Kawasaki Concours(GTR1000 in Yurp) had been running so-so (down on power)and was in need of a tuneup.
Which started with a carb sync. After assembling the tool (excellentinstructions, by the way) and prepping the bike I was able to sync thecarbs in less than 10 minutes andfar more accurately than with my old, homemade, vac gaugeset-up. What impressed me was the steadiness of the readingsin each column; there was little if no flutter. The improvementin performance was immediately noticeable and far betterthan after using my old synchronizer.
In addition to my homemade setup I have used a dealers custom gaugesand a tool similar to yours using mercury-filled columns. The Carbtuneis by far the most accurate and easiest to set up and use. I endorseyour product and highly recommend it.
E-gards!
Dxxx Pxxxxxx
From: exxxx bxxxxx
Sent: Thursday, September 30, 2004 9:03 AM
Hello there,
Just a quick email to congratulate you on a fantastic product !
I use it on a Triumph fuel injected triple, I just followed yourinstructions, and it worked straight away.
Thanks again !
Regards
From: Rxxxxxx Bxxx
Sent: Wednesday, September 29, 2004 6:50 PM
Hi There.
Got the carbtune this morning, adjusted carbs lunchtime. Took a totalof 1hr. Exalent product. Thank you.
Regards.
Rxxxxxx.
From: "Bxxxxxxx, Jxxxx"
Sent: Tuesday, September 28, 2004 2:26 PM Sean,
Just wanted to let you know that I hooked my 4-column Carbtune to mygirlfriend's V-Star this weekend, and it seemed towork very well. Thanks for a great product and fast service.
Jxxxx Bxxxxxxx
From: K Lxxxx
Sent: Tuesday, September 28, 2004 2:56 PM
My order arrived on 9/25 in good condition. Carbtune+Colortune workgreat,
Bike runs perfect now!
Thanks, Kxx
From: "Txxxxx and Sxx"
Sent: Wednesday, September 29, 2004 12:25 PM
Arrived today, 29.9.04 at 11:15am. Excellent service - why can't all
suppliers be as reliable??
Thanks,
Txxxxx.
From: "rxxx gxxx"
Sent: Tuesday, September 28, 2004 4:40 AM
Just a note to let you know I performed the carb synch on my 1986Goldwing Aspencade GL1200 last Saturday. Withoutever doing this before on any bike, I found the process ona 4 cylinder Goldwing to be extremely easy and using the CarbtuneII, I had the entire process done in less than half an hour.The guage 'shafts' were way off to each other when I firststarted but soon had them all dead on to each other. And thedifference has been dramatic. Although I was happy with theway the bike ran before (with the minor exception of a tinyhesitation), I was surprised at the extra power and smooth feeling Ifelt when I took it on a 200 mile ride the next day. I also have aKawasaki 1997 KZ1000 Police bike (4 cylinder) which will also get theprocess done as soon as I'm able.
Great product!
Rxxx CA, USA
From: "jxxxx kxxx"
Sent: Friday, September 24, 2004 7:19 AM
john,
just a quick note to say my order arrived today(24th sept). thanks verymuch for the efficent service and a great tool. it works fantasticallywell. cheers
jxxxx kxxx South Australia
From: pxxx
Sent: Sunday, September 19, 2004 6:17 PM
Hi Sean
I got the carbtune on wednesday the 15 th. (Sent Monday13th) What an excellent service. By the way I got your name/productrecommendation from KZRider.com.
Thanks a million,
Pxxxx Mxxxxxxxx Netherlands
From: rxxxxx mxxxxx
Sent: Saturday, September 18, 2004 6:09 PM
dear Sean, thanks for speedy dispatch i received the goods on saturdaymorning ,was well impressed, most bits i order take a week or moreyours took just over a day if you would like to use this e mail as anendorsement at any time fell free once again well done r.mxxxxx
From: Dxxxx Wxxxxxxx
Sent: Thursday, September 16, 2004 4:17 PM
Hi Sean,
You tool is excellent, I have posted that on the fjrowners sitewww.fjrowners.ws under technical chat
cheers Dxxxx
From: Mxxxxx@aol.com
To: morgan@carbtune.com
Sent: Thursday, September 16, 2004 7:31 PM
Subject: Carbtune
Hello!
February 2003 I purchased your Carbtune, followed by the nylon case. Ihad been using a Motion-Pro mercury sync set, before that(1981+) a setof Carbstix, also mercury. Let me tell you--I WILL NEVER USE MERCURYSYNC SETS AGAIN.
Not having to worry about spills, bubbles in the glass tubes, thedevice falling over, storage and transport makes thistool a joy! I was shocked how easy the Carbtune is to use.Easier to read, excellent damping, very accurate.
.............. ............................ Thank you!!Txxxxxxx Bxxx Mo. USA
From: S Gxxxx
Sent: Friday, September 10, 2004 11:03 PM
Hello John,
I received the Carbtune II kit very quickly (only had to wait a day!)Once it arrived, I got on with the carburettor synchronisation on my1995 Honda VFR750FS.
The process was so straight forward, that I decided to create a websitewith specific instructions for VFR750 ’94-’97 owners, including imagesand video clips.
The site URL is:http://vfr750.alan-partridge.co.uk/carbtune/carbtune.htm
Feel free to add it to your ‘Your Bike’ page if you wish.
Thanks for a great product and excellent service John,
Sxxxx
From: Jxxx Cxx. Dxxxxxxxx
Sent: Tuesday, August 31, 2004 3:33 PM
Hi John
I received the carbtune on friday 27/8 (Sent Thursday 26th to Denmark)
It worked out a little miracle on my FZR 1000
Med venlig hilsen
Jxxx Cxx. Dxxxxxxxx
From: Sxxxx Exxxxxx
Sent: Tuesday, August 31, 2004 3:19 AM
HI John,
I received my product last Friday just as scheduled. Thank you so muchfor a wonderful device.
It was so simple to hookup and check the carbs on my bike. My hubby wasimpressed!
Excellent!
Thank you,
Sxxxx Exxxxxx
From: Kxx Cxxxxxxxxxx
Sent: Tuesday, August 31, 2004 2:43 AM
John Morgan,
The Carbtune arrived today (8/30/04). Everything looks to be in order.Thank you very much for the excellent service. Funny thing is yourproduct arrived before the other items that I ordered (on the same dayand supposedly in stock)from local distributors. I can't wait to give it a go, itlooks like a high quality tool, which by the way was veryhighly recommended.
Thank you,
Kxxxx Scotts Valley, CA
From: Txxx Yxxxxxx
Sent: Friday, August 27, 2004 10:13 AM
Hi John Morgan
I made my order on Monday and got my Carbtune on Thursday.
Fantastic and now my Boxer is running smoothly again.
Best wishes
Txxx Yxxxxxx, Finland
From: Hxxxx
Sent: Tuesday, August 24, 2004 1:35 PM
Hi Sean,
I received the order today. Thank you very much for an excellentservice. My bike is now running better than ever!
Hamid
From: Axxxxxxxxxxx Cxxxxxxx
Sent: Monday, August 23, 2004 7:24 AM
HI AGAIN FROM GREECE.YOUR SERVICE IS UNBELIEVABLE IN JUST 2 WORKINGDAYS THE CARBTUNE IS HERE.I TAKE THE BILL FROMMY BANK AND EVERYTHING IS FINE.CONGRATULATIONS. THESSALONIKI
Time submitted: 19 Aug 2004 - 16:54:33
I've now bought four 4-column Carbtune II manometers for local clubmembers and I'm a big word of mouth advertiser forCarbtune on the various Lotus Car mailing lists on the internet.Carbtune II is an excellent product.
Regards, Txx Exxxx Lotus Owners, North Minneapolis, Minnesota, USA
From: T Yxxxx
Sent: Friday, August 20, 2004 4:29 AM
Received the Carbtune on Monday, August 16th, pressed it immediatelyinto service, and tuned the bike’s carbs. What an improvement inperformance! Thanks, great product.
Txxx Mosinee, WI, USA
From: "Rxxxxxx Sxxxxxxxxx-Sxxxx"
Sent: Wednesday, August 18, 2004 6:17 AM
I have just tuned up my Lotus Elite with the CarbTune that arrived
today, it was easy and made me an instant expert. The difference was
remakable, the engine running more smoothly and reving more easily, more
what I expecyted from a Lotus engine. ....................... Rxxxxxx Sxxxxxxxxxx-Sxxxx
Wanganui, New Zealand
From: Fxxx Cxxxxxx
Sent: Tuesday, August 17, 2004 3:52 AM
Hello John,
Received item at 4PM today. I will use it tomorrow on aVmax I just bought. 5 days from the day I ordered it "WOW"talk about speedy service, thank you very much. ( Sent Thursday,arrived Monday afternoon.)
Best Regard's,
Fxxx Cxxxxxx NY. USA
From: Hxxxxxxx Cxxxxxx
Sent: Monday, August 16, 2004 5:56 PM
Hi, John
The Carbtune has proven invaluable on my bike ('79GS750E), a CB650, anda '81 GS750L. All but my bike have the CV type carbs. The Carbtool hasbeen a real boon for the 750L and, to some degree, the CB650. I haven'treally needed it onmy bike because the screws are right out htere in the open.All the bikes have been running smoother and more reliablysince the carb synch. I'm anxious to try it out on otherbikes as well. On the VM type Mikuni carbs (Suzuki GS series up to butnot including 1980) the top of the carb has to come off so theadjustment can be made. This removal does not affect the vacuum levelat the Carbtune, and the synch goes smoothlywhile the engine is running...........................
Hxxxxxxx Cxxxxxx
From: Cxxxx Jxxxx
Subject: Re: Carbtune order UK and Toolpouch
This is just a note to say that the item ordered arrived in the postthe next day Saturday 14th August. I would like to say that the speedof service is fantastic & have already used the Carbtune, manythanks for a good product along with a good delivery service.
Regards Cxxxx Jxxxx UK
From: "Sxxxx"
Sent: Sunday, August 15, 2004 12:27 AM
Dear Sirs.Thank you for your superb,"CarbTune 2" and the quickdelivery.How do I add a Testimonial to your site as it'sso rare these days to find a good company who make a ,"Great" productand please tell that to all your workers/lads andlasses. I have never ever balanced carbs on a bike before until lastweek and your product and instructions are sogood that it was a joy to use and the difference to the bikeis like that between polished and un-polished Alloy forklegs Smoooooooooooth ;-)
Sxxxx
From: Exxxxx Yxxxxxxx
Sent: Friday, August 13, 2004 5:10 AM
Dear John
I received a Carbtune yesterday.
It had taken 7-days trip to Japan.
The carbtune works great on my bikes.
I was so amazed its durability, easy operation, and price.
I'll tell some of my friends about it.
Sincerely.
Exxxxx Kushiro City, Japan
From: Fxxxxxxxx
Sent: Thursday, August 12, 2004 11:43 AM
Hi John
I have received the Carbtune today (wonderful: 2 working day fordelivery)
Thank you very much, I’ll test it tomorrow.
Regards Mxxxxxx (MS) Italy
From: Mxx Lxxxxx Bxxxxx
Sent: Wednesday, August 11, 2004 3:05 AM
Hi recieved unit 8.30 am Wednesday the 11th of august (very very quick)I have just quickly used it and great! (SentFriday UK time, arrived Wednesday 8.30am OZ time)
Australia
From: Dxx
Sent: Tuesday, August 10, 2004 1:57 AM
Hi John,
I received the Carbtune today...that's 3 business days to California!?Thanks for the great service. I will be using the Carbtune in a fewdays.
Dxx
From: Sxxxxx
Sent: Thursday, August 05, 2004 4:32 AM
Order received on 8-2-04, It works great! Thanks!
Sxxxx Sxxxx
Derby, Kansas USA
From: Gxxxxxxx Gxxxxxx
Sent: Friday, July 23, 2004 10:52 PM
Hi John
I got Carbtune II this morning 23/07/04 at 10,35 am.Only 3 days. Veryfast service! Great tool! well done! Next Sunday I will retune thecarbs of my FZ1. I'll write to you about it.
Many thanks and best regards.
Gxxxxxxx Gxxxxxx from Italy
From: Jxx Sxxxxx
Sent: Thursday, July 29, 2004 3:33 AM
John,
Received the goods yesterday, Tuesday July 27.
Connected and sync'ed the ST1100 tonight. Very nice tool. Should last aman a lifetime.
Thanks,
Jxx OH. USA
From: "Sxxxx Rxxxxx"
Sent: Tuesday, July 27, 2004 7:58 PM
Sean got the CarbTune yesterday. I set it up and put iton my son's Kawaski and in less than ten min. it was doneand I didn't spill one drop of mercury. (No mercury in theCarbtune) This tuner workes like a champ...
Thanks
Sxxxx AZ, USA
From: jxxxxxxxxx@comcast.net
Sent: Saturday, July 03, 2004 7:45 PM
Hi there, Just to give you an update to my order, the orderarrivedon the 22nd of June. I attached the carb tune to my bike andmy carbs were way out of sync. Product works great! Figuredout my problem it about 10 minutes, once corrected, it tunedup like a dream. I've attached a picture of my bike Thanks Jxxxx WA.
From: "Gxxx Pxxxxxxxx"
Sent: Thursday, July 01, 2004 11:46 AM
Hi John,
Sorry it has taken me a while to answer your mail. The carbtune wasdelived on the 17th of June which makes it next day delivery. That isreally good given that the Royal Mail in Cardiffis shall we say often a little tardy with deliveries.
May I say what a brilliant piece of test kit the Carbtune II is. I haveused all sorts of carb gauges before ( including the original carbtunemany moons ago and home made gaugues using plasting tubing and water)and the CarbtuneII has to have been the easiest. No flicking needle, noworrying about toxic mercury getting into places and no water gettingsucked into the engine ( don't ask!).
I used the gauges for the first time last night on my old Guzzi Spadaand had the carbs balanced withing 15 minutes. I had used a set ofborrowed dial gauges before and the needle flicked around so badly itwas almost impossible to tellwhat was ppening. In fact it was so bad with dials that Irestorted to using the technique of listening to when theslides hit the stops to get initial sync then checking thepressure at the ends of the silencers. In all a long labouriouspain in the neck. So using the Carbtune was a sheer delight,and it showed me just how bad my manual attempts had been.
Many thanks, Gxxx UK
From: Mxxxxx Sxxxxx
Sent: Tuesday, June 29, 2004 1:04 PM
Hi John!
I got the carbtune today, but it's been at the post-office sinceMonday. I even tried it during my lunch-break, andit was so easy to use! I synced the carbs on my Yamaha FZS1000 in no time (never done it before), so the device hasalready paid for itself!
Great device and nice service from You!
Best regards
Mxxxxx Sxxxxx Norway
From: S Txxxxxx
To: Morgan Carbtune
Subject: Re: Carbtune
Hi John, I received my Carbtune on Thursday the 24th. I've alreadyadjusted the carbs and put it all back together.What a difference! Thanks for offering such a nice, easyto use product. I'll spread the word to my 2 wheel buddies.Thanks again,
Sxxxxx Txxxxxx GA, USA
From: Jxxx Sxxxxx
Sent: Saturday, June 26, 2004 11:47 PM
Hello From Jxxx sxxxxx I just wanted to let you know that I did Recevemy order on saturday June 26 2004 and the tool is every thing that Ihoped for real easy to use and setup I want to thank you for a fast order.
Thanks Jxxxxxx sxxxxx
From: axxxxxx mxxxxxx
Sent: Friday, June 25, 2004 9:45 PM
Hi John,
I've received the package today in the moorning (25/06/2004) You'revery professional !!!!
Only 2 days (That's incredible for Italy)
Thank's to You. .........
Bye Axxxxxx Mxxxxxx Como, Italia
From: Rxxxxxx
Sent: Friday, June 25, 2004 9:14 PM
John,
Many thanks for the prompt service, your package arrived yesterday(Thursday 24th June). It is a rare pleasure these days to deal with acompay which understands the true meaning of customer service. Onceagain many thanks.
Rxxxxxx
From: "Jxx Dxxxxxx"
Sent: Wednesday, June 23, 2004 7:56 PM
Hi John,
Apologies for not replying sooner. The Carbtune arrivedthe next day, first post, as promised.
Great piece of kit, tuned my VFR in an hour. The bike now runs muchsmoother and will pull from lower revs withoutsnatching. I'm now going to make a special tool so I don'thave to put my too big hand into a hot engine vee. Thankyou for a super product.
Jxx Dxxxxxx UK
From: Axxxxx Hxxx
Sent: Tuesday, June 22, 2004 1:18 PM
Many thanks for the prompt delivery. Firestorm now running verysmoothly thanks to your excellent and easy to use product.
Regards,
Axxxxxx
From: Cxxxx Txxxxxxx
Sent: Thursday, June 17, 2004 4:32 PM
Hi John
just to let you know the carbtune, tool pouch and colour tune arrivedthis morning, (ordered yesterday) thanks for aexcellent and super fast service
UK
From: DxxxxOxx
Sent: Thursday, June 17, 2004 11:04 PM
Dear Morgan,
I am very impressed with your awesome customer service and verythankful for having such a great product in the Carbtuner II. I didsome research prior to buying my new CarbtunerII and wanted a tool that did not have Mercury as I have2 year old at home and didn't want him to be in danger. Aftera few chat sessions on line and some great endorsements Itook the plunge and ordered online.
I must say that I was nervous wrenching into my motor and doing thefamed "Synching of the Carbs", but after reading on your website thebasics, I sync'd my carbs like a proin 20 minutes time! I wish I had know of your product sooneras I might have tried it, but you already saved me $100.00just by buying your product and using it. I would have paid$200.00 for my mechanic to do it! Is it hard - No way. Evena novice wrench can do this job. I did it! The Carbtuner IImakes it all happen. The pouch is a great idea as when I wasdone I stored my new tool in its pouch and into my tool chest.
I have already told all my friends about your product and postedawesome reviews on motorcycle websites to encourage others to try! I'lleven be putting a webpage for Kawasaki ZX900 Ninja 900's in the nearfuture to help others. Thanks Morgan, Sincerely , Dxxxx Oxx
California, USA
PS. I ordered the Carbtuner II and it arrived in 7 daysall the way from the UK.
From: Rxx
Sent: Tuesday, June 15, 2004 12:25 AM
John,
I writing this e mail to let you know that I received my Carbtune IIand pouch today being June, 14 2004. I received within your 8 workingday prediction for delivery. Not to mentionthat June, 11 2004 was an unexpected "holiday" for the USPostal Service due to the passing of our former President Regan.
I'd like to say and tell any future customers that the pouch is a geataddition that keeps everything safe and orgainized and that theCarbtune II is fairly compact with easy to understand instructions. Foranybody looking for a reasonably pricedset of vacuum guages I recommend these. Yes, mercury guagesare less expensive initially, but have many drawbacks. Theseinclude mercury separation, contamination, possible leakage/spillage all of which cause inaccurate readings plus havingto buy more mercury. This not to mention the possibility ofhaving mercury drawn into the engine. Mercury is also a hazard tohumans if not handled carefully and disposal is next to impossible.Since mercury is an enviromental threat it has to be disposedof in accordance with state and local laws. Is all of theabove worth saving a few dollars? Electronic guages are veryexpensive and simply aren't cost effective for the averageowner to have, costing as much as 5 times more in some cases.
Anyway I'd like to say thank you for making a tool thatis accurate, reliable reasonably priced. I will certainlyrecommend this tool to fellow riders.
Regards,
Rxx
From: Jxxx Wxxx
Sent: Saturday, January 12, 1980 10:57 AM
Hi John
Wow! Ordered Thursday evening, shipping e-mail Friday morning, arrived10am Saturday. I'd read the testimonials with a degree of scepticism -seems I was wrong.
Many thanks, Jxxx UK
From: Kxxxx Wxxxxxxx
Sent: Saturday, May 29, 2004 2:35 PM
Hello,
I ordered the Carbtune at 10PM and it arrived a day anda half later! Well done.
Thanks
Kxxxx UK
From: Axxxxx Axxx
Sent: Friday, May 28, 2004 3:37 PM
I received the Carbtune and Toolpouch....It arrived at my company 5/26.WOW - what a quality tool!!
Thanks,
Andy Abrams Houston, Tx.
From: Mxxxxxx Bxxxxxxxxxx
Sent: Tuesday, May 25, 2004 9:59 PM
I received the Carbtune today, what a brilliant service!
Many thanks,
Mxxxxxx
From: txxxxxx.pxxxxxxx
Sent: Saturday, May 22, 2004 12:49 PM
J'ai testé la colonne hier sur mon gex 1100 et avant hier surune kawa zxr9 et pour la premiere fois que je fais une synchro , jetrouve que votre appareil ets vraiment tres bien .
je suis vraiment satisafais
salutation txxxxxx France
From: sxxxx lxxxxx
Sent: Wednesday, May 19, 2004 5:23 PM
I spoke too soon with the email. The package arrived shortly after isent it. I have to tell you, your carbtune is byfar the best carb synchronization tool i have ever used.I dont know how i got along without it all these years. Ihave been using the mercury tuners and i have never had sucha precise measurement of carb vaccuum as your product enables.the mercury tuners flutter MUCH more than your product. Asa matter of fact the carbtune was steady as could be on allbut 1 cylinder, and that one had very minimal flutter.my 2001 zx7r issmooth as silk now. i installed the factory jet kit, factory +4ignition advancer and got rid of the EGR crap and vaccuum hoses and putbolts into the holes where the vacuum plugswere (after i balanced with the carbtune 2) the bike is smooth,crisp and has great throttle response. I just dont understandwhy your product isnt more well known in the states. if ihadnt been browsing the M&P website I would never evenheard of your great product. I think you need to advertisemore in the american motorcycle magazines, I hate to thinkthat so many people are missing out on the carbtune2 and hastlingwith messy, unreliable mercury tuners. you have a customer for life andi will spread the word about your product. thanks . Sxxxx Lxxxxx
From: "Sxx Txxx"
Sent: Wednesday, May 12, 2004 8:56 PM
Morgan,
I just received my Carbtune 2 and it is in fine shape. I am lookingforward to putting it to use.
Thank you for your prompt, and genuinely excellent customer service. Iwill be recommending this product to others just on service alone.First rate. Sxxxxx Txxx
From: Rxxxx Lxxxxxxx
Sent: Wednesday, May 12, 2004 10:32 PM
Hi John
Rec'd the Carbtune today 12/5/04, balanced my carbs in no time at all.
Thanks very much, a reccomended product and I'll put your companyforward to anyone needing one.
Regards
Rxxxx
From: Cxxxxxx Hxxxxxx
Sent: Thursday, May 06, 2004 7:43 PM
Greetings John,
I received my Carbtune II last week and took plenty of time reading themanual and constructing the dampers. Once I felt confident I hadeverything ready on the Carbtune, I pulled out my shop manual and readthe section on synchronizingthe carburators. It seemed simple enough. Well, the firsttime took me about 20 minutes to complete the process. ThenI read in the manual that adjusting the carburators shouldbe done after other things had been completed, i.e., changingspark plugs, cleaning or changing the air filter (my bikehas a K&N reuseable filter), etc. So, I put new NGK Iridiumspark plugs and cleaned the air filter. I re-connected the Carbtune IIand went through the adjustments again, only taking about 15 minutesthis time. I took my bike out for a spin and I could instantly tell thedifference. I rode about 100 milesand checked and adjusted the carburator balance one more time.This time was in less than 10 minutes. Thanks so much fora wonderful and easy to use device. I am telling all my fellowbikers about it.
Cxxxxxx Hxxxxxx Shiloh, Illinois
From: "Pxxxx Wxxxxxx"
Sent: Wednesday, May 05, 2004
John I'm impressed, the unit arrived this morning, justthree days including a Bank holiday from the time I ordered.The unit not only looks good but has the feel of qualityabout it. I am also amazed at the simplicity of operation,and as you said it is quite self explanatory. I did not needto turn it upside down, as the unit worked perfectly on theBMW R1100RT.
Thanks once again for a great product and fantastic service.
regards
Pxxx Wxxxxxx
From: Kxxxx Mxxxxxx
Sent: Tuesday, April 27, 2004 12:16 AM
John,
Thanks for the email. I finally used the Carbtune and did a 238 miletrip last Saturday. The bike runs great and Igot 45 miles to the gallon.. Previous best was 40. 79 HondaGL1000.(4 carbs). with the price of fuel going up daily itwill help..It is alot easier to drive when all carbs arepulling evenly. Thanks again for a great product.
Kxxxx Mxxxxxx
From: Exxx Cxxxxx
Sent: Monday, April 26, 2004 10:28 PM
Thanks for keeping me posted, John. I still have my instructions andI’m all stocked up on good ear plugs. However, please continue tocontact me whenever you have a good deal to offer. Oh, by the way, Icannot tell you how impressed I am withthe Carbtune I purchased from you.
……… exxx
From: "Ixx Rxxxx"
Sent: Monday, April 26, 2004 9:25 AM
John Received your Carbtune on Saturday morning. Excellent service with all parts and booklet easy to useand understand. Bike running excellently Saturday afternoon! Regards Ixx Rxxxx
From: "ixxxxxx vxxxxxxxx"
Sent: Friday, April 23, 2004 3:03 PM
Dear John,
just today i have my order in my hands just like you told me in youre-mail.The quallity is good and everything isinside the packet. I'm very pleased because the shippingwas very fast.Thank you and i put a comment at your website.Yourtool also will be displayed at my websitehttp://members.lycos.co.uk/tdm900hellas. Greece
From: Mxx Nxxxxxx
Sent: Sunday, April 25, 2004 2:31 PM
John,
Thanks for the reply. I received the Carbtune and Toolpouch on the 23rdof April (only 8 calendar days) Thanks! I assembled it and tuned my '85VMax on the 24th. It works just as advertised...so much better than themercury types. Bike runs 100% better. I didn't need to use the adaptersthough, although mightneed for future or friends bikes. I'll look forward to seeingmy gas mileage increase. My wife has been trying to get meover to the United Kingdom for some time now and we havea Sheltie dog (Shetland Sheep dog), which apparently is apopular breed in your "neck of the woods".
Thanks for developing this product, I'm sure I'll get my money's worth............
Regards, -Mxx
From: <M Txxxxx
Sent: Thursday, April 22, 2004 2:38 PM
Hi John
I have used your carb tune on 3 bike so far and I really like it. Itsas sensitive as the mercury sticks without the worry of dealing withmercury. Thanks for the great service and product. Mxxx Txxxxx
From: Kxxxx Bxxxx
Sent: Thursday, April 22, 2004 2:22 PM
Thanks for the info. ..... ..BTW, did I mention how much I love myCarbtune? I’m installing the brass taps so setup will be easier. Partof the fun of having a vintage car is tinkering with it. I’ve got dualDellorto dhla45’s on my Jensen Healey Lotus 907. Varooom!!!!!!!!!
Bxxxx Kxxxx Engineer Raleigh NC
From: mxxxxxxxx
Sent: Wednesday, April 21, 2004 8:47 AM
Hi Mr Morgan,
I am just letting you know as requested that my Carbtune Gauges arrivedin first class condition on Friday the 16th April.I have used themalready and they seem to be just as good as your first Mercury onesback in the early eighties or poss even seventy's if not even better(twenty odd years or so will tell!!).All the best and thanks for a fineproduct.
Axxx Cxxxx
From: Sxxxxxxxx Jxxxxx
Sent: Wednesday, April 21, 2004 9:59 AM
Dear John
Sorry for the slow reply. I received my Carbtune and tool pouch aboutthree weeks ago. I used it for the first timelast week to check the carbs on my Kawasaki Z1000, which Ihad just rebuilt. The Carbtune was easy to use, and I gota clear and accurate reading straight away. It's actuallythe first time I've used a vacuum guauge, but I found it reallyeasy to follow the instructions, and use the tool.
Thanks
Jxxxxx Sxxxxxxxx Tokyo Japan.
From: Sxxx Vxx Hxxxx
Sent: Tuesday, April 20, 2004 10:18 PM
Mr.
I was suprised to find the set already within 3 days inmy mailbox, that's faster than the national mail servicehere in Belgium!
Thanks, and keep up the good work.
Sxxx Vxx Hxxxx
From: Dxxx Lxxxxx
Sent: Tuesday, April 20, 2004 4:06 PM
Just to let you know that I rec'd my carbtune yesterday. I synchronizedmy carbs. last night. I have a 2003 Yamaha V-max.The carbtune worked great, THANK YOU FOR BUILDING A FINE PIECEOF EQUIPMENT. Thanks again, Dxxx Lxxxxx Tulsa,Ok. U.S.A.
From: Cxxxxxxxxxx Txxxxxxx Sxxx
Sent: Thursday, April 15, 2004 3:39 PM
for the futurs french purchasers,
je suis francais et j'ai achete cet outil pour synchroniser ma fazer600. Je peux vous dire qu'il est tout simplementgenial car très simple d'utilisation et surtout àun rapport qualité/prix imbatable, pour avoir comparer avec lessynchroniseur à aiguille où autres, je peux vous leconseiller
grand V et à bientôt sur les merveilleusesroutes de france
From: rxx hxxx
Sent: Wednesday, April 14, 2004 5:27 PM
Hi, just letting you know I received the the package onthe 13th and it arrived in great shape. Just opened thismorning (14th) and within one hour I had the carbs (all fourof them) on my 81 honda goldwing GL1100 purring like a kitten.Let me tell you it's a wonder it was even running at all.For my first time ever doing this the tuner made it a no-brainer. Itidles smoothly and has alot more throttle response. I'll be orderingthe adjusting tool soon (should cut my time in half, a wrench andscrewdriver are a pain in the you knowwhat to use when doing this). Thanks again for a very finely craftedtool. Bxxxx Hxxx, Calhoun, Ga. USA.
From: Ex Kxxxxxxx
Sent: Tuesday, April 13, 2004 12:58 PM
John,
I received the package tuesday April the sixth.
I already used it by synchronising my Honda CBX 6 cilinder with 6carbs.
It is a piece of cake, even the first time ever synchronising carbs. Iwas able to synchronise it even before the engine became too hot (it isair cooled, and I have no suitablefan), and managed it within one hour total. ............
Thanks, Ex Kxxxxxxx The Netherlands
From: txx vxx zxxxx
Sent: Tuesday, April 13, 2004 1:54 AM
Subject: SHIPPING
HI MORGAN, THIS TOOL IS THE BEST! WORKS OVER AND BEYONDEXPECATIONS! IT ONLY TOOK 5 DAYS TO GET TOO VERMONT.
THANKS AGAIN! Txx Vxx Zxxxx VT USA
From: E. Bxxxx Sxxxxxx
Sent: Wednesday, April 07, 2004 5:11 PM
Dear John:
I finally got my Carbtune II out of the box it was shipped in and had achance to use it. Very easy, no difficulty in the set up or use of thedevice. Thanks for the tunes! Ican easily justify the cost of your unit as it is pricedat about the same as what the shop would charge me. So, itessentially paid for itself. Thanks. I will let you knowabout my performance after my 500 mile trip up north. Regards,E. Bxxxx Sxxxxxx VA
From: "Lxxxxx Exxxxx"
Sent: Tuesday, April 06, 2004 7:33 AM
Hello John,
Just wanted to let you know my carbune arrived this morning. That's
incredible: placing an order in England on friday and receiving thecarbtune
in Belgium on tuesday. Some would call that ludicrous speed!
Thanks,
Lxxxxx Exxxxx
Gent
Belgium
From: "Kxxx Mxxx"
Sent: Monday, April 05, 2004 6:45 PM
John,
Received the package late last week and used it yesterday afternoon. Byfar the best and easiest tool (of its type)that I have ever used. Best wishes, Kxxx
From: Hxxx, Axxxx
Sent: Monday, March 29, 2004 11:12 PM
Received the package on Saturday. That is very quick since I gave
authorization on Monday. (Sent Tuesday) Great instrument andinstructions.
Thanks,
Axxxx Hxxx Illinois
From: Rxxxxx Jxxxx
Sent: Monday, March 29, 2004 10:25 PM
Hi John,
Congrats.... I just used the CarbTune II today and as you are wellaware...
CarbTune II is an awesome tool. Enough said..... Just wanted to passalong my best reguards. Take care.
v/r Rxxxxx
From: dxxxxxxx
Sent: Friday, March 26, 2004 5:18 PM
Hi Morgan,
Just want to let you know that I used the carbtune yesterday. It worksperfectly. Got a smooth and ballanced sync. Thanks for the greatproduct.
Dxx
From: Axxxxx Rxxxxxx
Sent: Sunday, March 21, 2004 11:03 AM
Hi John
Used the Carbtune for the first time the other day, andworks brilliantly on my ZXR750. Kawasaki made the job eveneasier by providing connection nipples on each of the inlettracts making hook up a breeze. I didn't even have to disconnector relocate the fuel tank, just unbolt it and move it backto gain access to the top of the carb's. .....Anyway, thanksagain for a great tool
Best Regards Axxxxx Rxxxxxx
From: P Cxxxxxxxx
Sent: Saturday, March 20, 2004 9:24 AM
Hi
Thank you for the carbtune, Just to let you know I ordered Thursdaynight on the internet, recieved your email Friday and recieved thecarbtune Saturday morning. Excellent service! I was expecting it aroundMonday thinking it would be delayed with the weekend coming up. Time totune the Laverda
Kind regards
Pxxx. UK
From: "Rxxxxxx Kxxxx"
Sent: Tuesday, March 16, 2004 3:59 AM
John, I received my order today. Shipped on 3/8 arrivedat my door on 3/15, I don't get things that fast from someof the USA vendors that I buy from. Everything was in goodorder upon arrival. I am impressed with the quality of theCarbtune and the tool pouch is fantastic. I can't wait tillthe weekend, when I will have time off from work, so thatI can actually use it to sync my carbs. I have four 1982Honda CB 900 Customs, I know the Carbtune will be seeinga lot of action. I'll send you a note next week, after I have used it.Thanks Again
Rxxxxxx Kxxxx Richmond VA USA
From: Mxxxxxx Rxxxx
Sent: Sunday, March 14, 2004 8:01 PM
IN REPLY TO YOUR EMAIL I RECEIVED MY CARBTUNE 11 IN THEPOST SATURDAY 13 MARCH AM.PRODUCT SUPERB HAVE ALREADY USEDTO GREAT SUCCESS.LOOK FORWARD TO DOING BUSINESS WITH YOUIN THE FUTURE.
YOURS Mxxx Rxxxx
From: "Txxxxx Dxxx"
Sent: Saturday, March 13, 2004 8:17 PM
Hi, I ordered my Carbtune at approx 10pm Wednesday night at received itat 10am Friday morning, outstanding service , thanks very much
Txxxxx UK
From: sxxxxx mxxxxxxxxx
Sent: Thursday, March 11, 2004 1:58 PM
lads, just a quick note to say that i have been using carb balancersfor a number of years and my wife got me a setof morgan carbtune 2 for my birthday this week.
what can i say a product that actually works, well done, just ran acbr600 and zx6r on the dyno then balanced both withyour carbtune, nice differance without a doubt. very easyto use and spot on, keep up the good work.
regards, dxxxx Lxxxx.
From: Axxxxx Sxxx
Sent: Thursday, March 11, 2004 9:45 AM
Hello Mr Morgan I used my new carbtune yesterday took adout half anhour , I used to use an old set of gauges there is no comparison yourcarbtune has given my bike a crisp throttle response and a nice eventick over . also found very mucheasier to read , booklet very useful too.
bye A.Sxxx
From: Axxxxx Sxxx
Sent: Wednesday, March 10, 2004 9:18 AM
Good morning Mr Morgan,
Have just recieved your carb tune this morning 10 th at8.30 am .(Sent yesterday) can I just say thank you very muchfor your prompt serivce,and your email yesterday, this isthe first time I have used the internet to buy anything, andhaving you confirm the sale I found very reassuring , mustgo now have carbs to balance ! Thanks again A Sxxx
From: Sxxxx Jxxxx
Sent: Tuesday, March 09, 2004 5:46 PM
As you requested the carbtune arrived today (Tuesday), I ordered it onSaturday and think it was dispatched yesterday so that's not bad. Plusmy bike now runs much better with nomore 'miss-fire' that I'd been trying to find the cause of...
Cheers. Si.
From: "Rxxxxxx Oxxxxx"
Sent: Sunday, March 07, 2004 8:42 PM
John, Thanks a million! FYI: Your Carbtune is the best I have everused...I have already added then to my wish list.
Best Regards
Rxxx
From: Axxxxxxxxx
Sent: Thursday, March 04, 2004 4:51 PM
Subject: Thank You great product!!!!
I recieved my product on tuesday total ship time took 6days from the UK, not bad at all!!!! Great product I usedit immediately with ease. My bike now runs 100 percent better.Thanks Kxxxxxx Sxxxxxx IL. USA
From: sxxxxx
Sent: Thursday, February 26, 2004 11:52 AM
I received the storage pouch on Monday, Februay 23rd. Thank you for notonly a great tool (CarbTune) but also a verynice pouch for storing it. I've been keeping my CarbTunein the original cardboard mailing box but now it's betterprotected and easier to store and carry. Again, thank youfor one of the best and most valuable tools for my YamahaV-Max!
USA
From: Jxx Cxxxxxx
Sent: Wednesday, February 25, 2004 8:29 PM
Dear John Morgan
Today, 25/02-04, I recieved my Carbtune II. I must say that I am verypleased with the delivery time. I expected to get it earliest Friday,maybe Thursday if all went well, butthis is just amazing. (Sent Monday, arrived Wednesday)
Thank You very much for the good service.
With kind regards
Jxx Cxxxxxx Denmark
From: Ixx Rxxxxxx
Sent: Tuesday, February 24, 2004 10:18 PM
Carbtune arrived this morning (25th). (Sent Friday 20tharrived Wednesday 25th Australian time)
Great service, everything must have gone just right. Thanks very much
Ixx Rxxxxxx Victoria, Australia.
From: Sxxxxx Wxxxxx
Sent: Saturday, February 21, 2004 6:49 PM
Hi John
Received my Carbtune on Friday morning (20th), safe andsound.
Very pleased with it (already tried it out!) - I also think your website, instructions etc are some of the best I have seen (in anyindustry). Good job!
Thanks.
Sxxxx.
From: Wxxxxxx Jxxxxxx
Sent: Thursday, February 19, 2004 6:29 PM
Hello John,
I’m pleased to let you know that my Carbtune II arrivedyesterday (18th February 2004) in the morning post. Excellentresponse I shall be playing with it this weekend, and willknow doubt be recommending you to all my fellow biker brethren.
Again thanks
Wxxx
From: "Hxxxxx, Jxxxx
Sent: Monday, February 16, 2004 1:11 PM
Hi
Just a quick message to say thanks for the great service. I bought a
Carbtune II to set up my GSX Katana, and they arrived very promptlyindeed.
This aided setting up the machine and it is much smoother now. That waslast
Summer.
I looked at the website recently and decided to order aTool pouch to
protect the gauges and an adjuster to assist with the balancing of the
carbs.
Once again the service and quality from your company issecond to none.
Cheers
Jxx Hxxxxx
From: Rxxxx
Sent: Wednesday, February 11, 2004 12:10 PM
Hi John
I received the toolpouch this morning.. excellent quality..more thanhappy with it and the delivery time is second to none..very fast to saythe least.. I cant recommend your products enough..thank you very much.
cheers
Pxxx UK
From: Bxxxxxxx Sxxxx
Sent: Thursday, February 12, 2004 12:59 AM
Hello John,
Just letting you know that the kit (Carbtune II) arrived here withineight days of placing the order. I must say that the ease with whichthe kit was assembled and the end result from tuning the bike(GSXR1100L) was well worth the wait, smoothand no flat spots; I had been experiencing a flat spot between2,700 to 3,200 RPM. The kit made tuning the bike a pleasure- so quick and easy my coffee didn't even get cold. One finalpoint, it's a pity more companies don't produce operating manuals likethe one you provided - well written with clear directions.
Cheers
Bxxx Sxxxx (Tasmania)
From: Txx Gxxxxx
Sent: Wednesday, February 11, 2004 2:18 AM
Subject: RE: Carbtune Toolpouch offer
Thanks, but no thanks. The product, (carbtune) incidentally, isperfect.
Txx
Txx Gxxxxx
From: txxx hxxxxxxx
Sent: Wednesday, February 11, 2004 7:07 AM
Mr. Morgan,
The manometer arrived today, in inland Queensland, 4 business days, and6 overall. This is very quick. I was delightedwhen i opened the box... it is a very elegant looking unit,compared with the bulky manometers, such as Motion Pro etc...I will be sure to write you with the results of my TBS onmy FJR 1300 tonight...
Many thanks again
Txxx Hxxxxxxx, Queensland, Australia
From: "txxxxxx"
Sent: Tuesday, February 10, 2004 12:04 AM
Subject: Impressive Product
Hello,
I'm really impressed with the Carbtune II. Great quality, works asadvertised. The damping is perfect for my Triumph triple.
.. ....... Cheers,
Kxx Txxxxx IN. USA
From: "Pxxxx Fxxxxxx"
Sent: Monday, February 09, 2004 3:13 PM
Hi John Morgan
Thank you for prompt delivery. ordered 7.30 pm Thurs 5/2/04 arrived9.00am Sat 7/2/04 I call that good service. I amimpressed with the quality of the Carbtune. I sychronisedthe carbs of my FJ1200 on Sunday, it really is as easy asit sounds in your instructions. During the process the progressiveimprovement was so obvious and at the end it sounds so muchsweeter.
I found your website so easy to access and also to follow. I found theinformation contained extremely useful and will not hesitate torecommend you and your products to anyonein future.
Thankyou once again
Pxxx Fxxxxxx
From: Exxx Lxxxx
Sent: Friday, February 06, 2004 9:14 PM
John:
.....By the way, have I told you how much I really enjoy using theCarbTune II !!!!
It is an excellent product! Thanks again for seeing a market niche andfilling it with a high quality, well-designed and engineered product.
Exxx Lxxxx
Sent: Thursday, February 05, 2004 1:04 AM
Dear Mr. Morgan;
I received the Toolpouch Tuesday (February 3) in the mail and put
the Carbtune in the pouch tonight. It worked like a champ. It
definitely makes keeping things together and clean mucheasier. A
great product for a great product, and you can quote meon that.
Thank you.
Hxxxxx C. Lxxx Missouri, USA
From: Mxxx Gxxxxx
Sent: Tuesday, February 03, 2004 3:04 AM
Received the carbtune today and it looks to be a well constructed toolthat should last me a lifetime.
Thanks,
Mxxx Gxxxxx San Diego
From: <kx.bxxxxxx
Sent: Monday, February 02, 2004 8:04 PM
Hi,
Just to let you know that I received my carbtune & carbtool onMonday Feb 2nd in New Zealand, so total turn-around from
ordering was basically 7 days. Excellent.
Synched the carbs on my cb750f Monday night - it workedreally well, couldn't have been easier.
Also, the carb-tool ended up being invaluable. I realise now I probablycouldn't have successfully done the mechanical adjustment
with anything that I actually had on my work bench.
Cheers Kxxxx Bxxxxxx New Zealand
From: Fxxxxxxx, Mxxxxxx G
Sent: Thursday, January 29, 2004 7:53 PM
John,
Thank you for the timely delivery of the Morgan Carbtune! I received mypackage this morning (1/29/04 - 10am local)via US postal service. I only had a few moments to reviewthe contents before leaving for work, however I was stunnedat the high quality of the tool pouch and the Carbtune itself. I can'twait to give it it's first use this weekend whenI tune up the GS500!
Thanks!
Mxxx Fxxxxxxxx Los Angeles (Torrance), CA.
http://www.mcnninjas.co.uk/forum/viewtopic.php?t=13485
http://www.fjrowners.ws/discus/messages/2/7625.html?1077793657
Time submitted: 28 Jan 2004 - 06:03:29
Mxxx Bxxxx
I belong to a Yamaha Radian mailing list, and some of the members haveused the Carbtune ll, so I ordered one, andreally like it. So that's why I am ordering the pouch.
Sent: Sunday, January 18, 2004 2:56 AM
John, rec'ed the carb tune II today , was in our regularmail.....saturday, 1/17/04...south of Baton Rouge, Louisiana...put itto the test this afternoon....seems to be miles ahead of the merc.tubes........thanks....mxxx....
From: Hxxxxxx, Bxxx
Sent: Sunday, January 18, 2004 8:47 PM
John,
Further to my e-mail of last week. I just wanted to give you somefeedback.
Turned out the postage only took 5 days which is quicker than most ofthe
stuff I order in Australia. Carbtune was is perfect condition when it
arrived. I must comment on the build quality as I was astounded (as wasmy
father) at the high quality and time taken in design for the tool thatonly
costs $AUS130. The first bike I tackled was my 1998 Suzuki GSXR-750(first
of the fuel injection). ....................... Synced the throttlebodies in all of about 3 minutes. Took it for aride and it had that newly serviced smoothness to the powerdelvery. Observing was my neighbour with an 2003 Kwaka ZX-636R.So up went the tank on his bike. His throttle bodies had thesame connectors as the Suzuki units so once again we
had to use zip ties. Anyway the Kwakas has a throttle body setup whereonly
the pairs can be adjusted so I adjusted those in about 2 minutes andthen he
was off for a test ride. He was very happy with what hefelt and the bike
response.
Well I'd just like to say I'm extremely happy with the tool and delivery
service and it works great. .................
Regards,
Bxxx Hxxxxxx.
From: Txxxxx Mxxxx
Sent: Friday, January 16, 2004 8:37 PM
Hi John
I have been away all week but apparently the Carbtune arrived onTuesday Morning. Thank you for the first class delivery service and theexcellent product.
Txxxxx
From: Bxxxx & Cxxxxx
Sent: Friday, January 16, 2004 12:15 AM
Hello there,
FYI the Carbtune has been an excellent product.
Bxxxx
From: axxxx
Sent: Tuesday, January 13, 2004 3:11 AM
John
I got the Carbtune with tool pouch today (12 Jan or about 4 to 5working days). You must have flown it over and putit in my mailbox yourself because I know our postal serviceisn't that fast. It often takes longer for me to receive thingsfrom California. Very nice. The tool and pouch appear to betop notch! It's been a pleasure doing business with you.
Axxxx OK. USA
From: txxxxxx
Sent: Monday, January 12, 2004 9:19 PM
I received package 8 January 2004. I am very pleased with theappearance and quality of the instrument and the toolpouch.
Cheers,
Kxx IN. USA.
From: Dx Gxxxxx Wxxxxx
Sent: Monday, January 12, 2004 2:22 PM
Hi John,
I let you know that Carbtune II today has been delivered. It´shas been for 3 working day under way. That isSUPER fast. I ordered many things from USA and Germany andthat took about 2 weeks and more when I receive it. I wasvery suprised when I saw the package and almost didn´tbelieve how fast it was.
So you did a good job.
Best regards.
Wxxxxx Dx Gxxxxx Belgium
From: Bxxxx Cxxxxxxx
Sent: Friday, January 09, 2004 11:20 AM
Hi John,
I received the Carbtune on 01/06/04. Thanks...I like the unit, verycompact and easy to use. Appreciate the quick service.
Have a good day.
Rxxxxx
Rxxxxxx H. Qxxxxx
Time submitted: 4 Jan 2004 - 15:39:36
PS. I JUST LOVE MY CARBTUNE!!!  
| 
